Processor Type: Intel(R) Atom(TM) CPU C2358 @ 1.74GHz Processor Speed: 1743 MHz Total Memory: 4096MB (DDR3 1333) USB Devices total: 0 KBDs, 0 MICE, 0 MASS, 1 HUBs Detected ATA/ATAPI Devices... Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc. CASwell, Inc. COB-G800-000 Rev.:R1.00 ( 20141209 ) Press or to enter setup. Press to enter BBS POPUP. GNU GRUB version 2.02~beta2 +----------------------------------------------------------------------------+ |*Latest Velocloud Image | | Force Velocloud Factory Image | | Force Velocloud Root1 | | Force Velocloud Root2 | | | | | | | | | | | | | | | +----------------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. Press enter to boot the selected OS, `e' to edit the commands before booting or `c' for a command-line. ESC to return previous menu. The highlighted entry will be executed automatically in 0s. Booting `Latest Velocloud Image' stamps: root1=0 root2=11 early console in decompress_kernel Decompressing Linux... Parsing ELF... done. Booting the kernel. [ 0.000000] Linux version 3.14.37 (jenkins@build-01.eng.velocloud.net) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r43222) ) #1 SMP Tue Jun 30 18:32:56 PDT 2015 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz root=/dev/sda7 rootfstype=ext4 rootwait earlyprintk=serial,ttyS0,115200 panic_timeout=5 console=tty0 console=ttyS0,115200n8 noinitrd vcimg=2 crashkernel=2G-:128M [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007e96cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007e96d000-0x000000007e99cfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007e99d000-0x000000007ebc6fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ebc7000-0x000000007f42efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007f42f000-0x000000007f63dfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f63e000-0x000000007f7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0x7f800 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd6a0-0x000fd6af] mapped at [ffff8800000fd6a0] [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff] [ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff] [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7e96cfff] [ 0.000000] init_memory_mapping: [mem 0x7e99d000-0x7ebc6fff] [ 0.000000] init_memory_mapping: [mem 0x7f63e000-0x7f7fffff] [ 0.000000] ACPI: RSDP 00000000000f04a0 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 000000007ec1a088 00008C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 000000007ec1d1c8 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 000000007ec1a1a8 00301C (v02 ALASKA A M I 01072009 INTL 20061109) [ 0.000000] ACPI: FACS 000000007f42cf80 000040 [ 0.000000] ACPI: FPDT 000000007ec1d2d8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 000000007ec1d320 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: WDAT 000000007ec1d360 0001AC (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: UEFI 000000007ec1d510 000042 (v01 00000000 00000000) [ 0.000000] ACPI: APIC 000000007ec1d558 000068 (v03 INTEL TIANO 00000001 MSFT 00000000) [ 0.000000] ACPI: BDAT 000000007ec1d5c0 000030 (v01 00000000 00000000) [ 0.000000] ACPI: HPET 000000007ec1d5f0 000038 (v01 INTEL 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000007ec1d628 0009F1 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: HEST 000000007ec1e020 0000A8 (v01 INTEL AVOTON B 00000001 INTL 00000001) [ 0.000000] ACPI: BERT 000000007ec1e0c8 000030 (v01 INTEL AVOTON B 00000001 INTL 00000001) [ 0.000000] ACPI: ERST 000000007ec1e0f8 000230 (v01 INTEL AVOTON B 00000001 INTL 00000001) [ 0.000000] ACPI: EINJ 000000007ec1e328 000150 (v01 INTEL AVOTON B 00000001 INTL 00000001) [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x17fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00099fff] [ 0.000000] node 0: [mem 0x00100000-0x7e96cfff] [ 0.000000] node 0: [mem 0x7e99d000-0x7ebc6fff] [ 0.000000] node 0: [mem 0x7f63e000-0x7f7fffff] [ 0.000000] node 0: [mem 0x100000000-0x17fffffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] e820: [mem 0x7f800000-0xdfffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88017fc00000 s70208 r8192 d24000 u1048576 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1027367 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz root=/dev/sda7 rootfstype=ext4 rootwait earlyprintk=serial,ttyS0,115200 panic_timeout=5 console=tty0 console=ttyS0,115200n8 noinitrd vcimg=2 crashkernel=2G-:128M [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 4028352K/4174792K available (4919K kernel code, 443K rwdata, 1628K rodata, 764K init, 492K bss, 146440K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:4352 nr_irqs:512 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1750.001 MHz processor [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3500.00 BogoMIPS (lpj=1750001) [ 0.010649] pid_max: default: 32768 minimum: 301 [ 0.015284] ACPI: Core revision 20131218 [ 0.022424] ACPI: All ACPI Tables successfully acquired [ 0.028265] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.035000] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.042420] Initializing cgroup subsys devices [ 0.046879] Initializing cgroup subsys net_cls [ 0.051338] Initializing cgroup subsys blkio [ 0.055646] CPU: Physical Processor ID: 0 [ 0.059674] CPU: Processor Core ID: 0 [ 0.067936] mce: CPU supports 6 MCE banks [ 0.071968] CPU0: Thermal monitoring enabled (TM1) [ 0.076776] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.076776] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0 [ 0.076776] tlb_flushall_shift: 6 [ 0.091801] Freeing SMP alternatives memory: 20K (ffffffff81795000 - ffffffff8179a000) [ 0.100217] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.116235] smpboot: CPU0: Intel(R) Atom(TM) CPU C2358 @ 1.74GHz (fam: 06, model: 4d, stepping: 08) [ 0.125542] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver. [ 0.135933] ... version: 3 [ 0.139953] ... bit width: 40 [ 0.144060] ... generic registers: 2 [ 0.148079] ... value mask: 000000ffffffffff [ 0.153391] ... max period: 000000ffffffffff [ 0.158702] ... fixed-purpose events: 3 [ 0.162712] ... event mask: 0000000700000003 [ 0.168415] x86: Booting SMP configuration: [ 0.172612] .... node #0, CPUs: #1 [ 0.194115] x86: Booted up 1 node, 2 CPUs [ 0.198330] smpboot: Total of 2 processors activated (7000.00 BogoMIPS) [ 0.205934] pinctrl core: initialized pinctrl subsystem [ 0.211254] NET: Registered protocol family 16 [ 0.216362] cpuidle: using governor ladder [ 0.220466] cpuidle: using governor menu [ 0.224503] ACPI: bus type PCI registered [ 0.228747] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.238060] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.244850] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!) [ 0.254983] PCI: Using configuration type 1 for base access [ 0.269111] bio: create slab at 0 [ 0.273357] ACPI: Added _OSI(Module Device) [ 0.277549] ACPI: Added _OSI(Processor Device) [ 0.282002] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.286715] ACPI: Added _OSI(Processor Aggregator Device) [ 0.297351] ACPI: Interpreter enabled [ 0.301031] ACPI: (supports S0 S5) [ 0.304442] ACPI: Using IOAPIC for interrupt routing [ 0.309541] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.329334] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.335536] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.344269] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.352592] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.363212] PCI host bridge to bus 0000:00 [ 0.367327] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.372818] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.379002] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.385189] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.392068] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff] [ 0.398946] pci_bus 0000:00: root bus resource [mem 0x180000000-0xfffffffff] [ 0.412036] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.417136] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.422227] pci 0000:00:03.0: PCI bridge to [bus 03] [ 0.427317] pci 0000:00:04.0: PCI bridge to [bus 04] [ 0.432459] ACPI: PCI Interrupt Link [LNKA] (IRQs 6 7 10 *11 12 15) [ 0.439047] ACPI: PCI Interrupt Link [LNKB] (IRQs 6 7 10 11 12 15) *0, disabled. [ 0.446827] ACPI: PCI Interrupt Link [LNKC] (IRQs 6 7 10 *11 12 15) [ 0.453427] ACPI: PCI Interrupt Link [LNKD] (IRQs 6 *7 10 11 12 15) [ 0.460021] ACPI: PCI Interrupt Link [LNKE] (IRQs 6 7 *10 11 12 15) [ 0.466606] ACPI: PCI Interrupt Link [LNKF] (IRQs 6 *7 10 11 12 15) [ 0.473192] ACPI: PCI Interrupt Link [LNKG] (IRQs 6 7 10 *11 12 15) [ 0.479785] ACPI: PCI Interrupt Link [LNKH] (IRQs 6 7 *10 11 12 15) [ 0.486937] ACPI: Enabled 1 GPEs in block 00 to 1F [ 0.492036] vgaarb: loaded [ 0.494984] SCSI subsystem initialized [ 0.499127] ACPI: bus type USB registered [ 0.503271] usbcore: registered new interface driver usbfs [ 0.508823] usbcore: registered new interface driver hub [ 0.514218] usbcore: registered new device driver usb [ 0.519562] pps_core: LinuxPPS API ver. 1 registered [ 0.524533] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.533710] PTP clock support registered [ 0.537940] PCI: Using ACPI for IRQ routing [ 0.543320] pci 0000:00:16.0: no compatible bridge window for [mem 0xfd000000-0xfd0003ff] [ 0.551982] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.556975] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.564844] Switched to clocksource hpet [ 0.568939] pnp: PnP ACPI init [ 0.572026] ACPI: bus type PNP registered [ 0.576590] system 00:01: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.583564] system 00:01: [mem 0x7f800000-0x7fffffff] could not be reserved [ 0.590683] system 00:02: [io 0x0680-0x069f] has been reserved [ 0.596622] system 00:02: [io 0x0400-0x047f] could not be reserved [ 0.602899] system 00:02: [io 0x0500-0x05fe] has been reserved [ 0.608844] system 00:02: [mem 0xfed00000-0xfedfffff] could not be reserved [ 0.615819] system 00:02: [mem 0x000c0000-0x000dffff] has been reserved [ 0.622447] system 00:02: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.629421] system 00:02: [mem 0xffa00000-0xffffffff] has been reserved [ 0.636041] system 00:02: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.643093] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 0.649024] system 00:04: [io 0x0a10-0x0a1f] has been reserved [ 0.656275] pnp: PnP ACPI: found 7 devices [ 0.660390] ACPI: bus type PNP unregistered [ 0.674681] pci 0000:00:16.0: BAR 0: assigned [mem 0x80000000-0x800003ff] [ 0.681489] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.686472] pci 0000:00:01.0: bridge window [mem 0xdfd00000-0xdfdfffff] [ 0.693278] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.698264] pci 0000:00:03.0: PCI bridge to [bus 03] [ 0.703253] pci 0000:00:04.0: PCI bridge to [bus 04] [ 0.708321] NET: Registered protocol family 2 [ 0.713051] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.720393] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.727195] TCP: Hash tables configured (established 32768 bind 32768) [ 0.733787] TCP: reno registered [ 0.737037] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.743089] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.749663] NET: Registered protocol family 1 [ 0.754168] RPC: Registered named UNIX socket transport module. [ 0.760104] RPC: Registered udp transport module. [ 0.764821] RPC: Registered tcp transport module. [ 0.769532] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.787117] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.793583] software IO TLB [mem 0x7a96d000-0x7e96d000] (64MB) mapped at [ffff88007a96d000-ffff88007e96cfff] [ 0.803757] microcode: CPU0 sig=0x406d8, pf=0x1, revision=0x125 [ 0.809699] microcode: CPU1 sig=0x406d8, pf=0x1, revision=0x125 [ 0.815705] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.824677] SSE version of gcm_enc/dec engaged. [ 0.830302] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.836801] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.849874] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.856321] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.866350] msgmni has been set to 7867 [ 0.870498] io scheduler noop registered [ 0.874439] io scheduler deadline registered (default) [ 0.879697] pcu_gpio 0000:00:1f.0: gbase is 0x503 [ 0.884576] pcu_gpio 0000:00:1f.0: abase is 0x403 [ 0.889301] pcu_gpio 0000:00:1f.0: pbase is 0xfed03002 [ 0.895714] pcieport 0000:00:04.0: can't derive routing for PCI INT A [ 0.902168] pcieport 0000:00:04.0: PCI INT A: no GSI [ 0.907645] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 0.914618] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.921185] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 0.928181] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt [ 0.935174] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt [ 0.942355] ipmi message handler version 39.2 [ 0.946729] ipmi device interface [ 0.950204] IPMI System Interface driver. [ 0.954395] ipmi_si: Adding default-specified kcs state machine [ 0.960352] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 0.970360] ipmi_si: Interface detection failed [ 0.979793] ipmi_si: Adding default-specified smic state machine [ 0.985844] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 [ 0.995936] ipmi_si: Interface detection failed [ 1.004787] ipmi_si: Adding default-specified bt state machine [ 1.010660] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 [ 1.020493] ipmi_si: Interface detection failed [ 1.030041] ipmi_si: Unable to find any System Interface(s) [ 1.035628] IPMI Watchdog: driver initialized [ 1.039996] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 1.048494] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled ¦[ 1.075693] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.103891] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.112006] Non-volatile memory driver v1.3 [ 1.116207] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 1.125171] Hangcheck: Using getrawmonotonic(). [ 1.140768] ahci 0000:00:18.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.148874] ahci 0000:00:18.0: flags: 64bit ncq led clo pio sxs deso sadm sds apst [ 1.157579] scsi0 : ahci [ 1.160448] scsi1 : ahci [ 1.163206] ata1: SATA max UDMA/133 abar m2048@0xdff35000 port 0xdff35100 irq 44 [ 1.170613] ata2: SATA max UDMA/133 abar m2048@0xdff35000 port 0xdff35180 irq 44 [ 1.179178] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.185722] ehci-pci: EHCI PCI platform driver [ 1.190338] ehci-pci 0000:00:16.0: EHCI Host Controller [ 1.195590] ehci-pci 0000:00:16.0: new USB bus registered, assigned bus number 1 [ 1.203015] ehci-pci 0000:00:16.0: debug port 2 [ 1.211502] ehci-pci 0000:00:16.0: irq 23, io mem 0x80000000 [ 1.222735] ehci-pci 0000:00:16.0: USB 2.0 started, EHCI 1.00 [ 1.228984] hub 1-0:1.0: USB hub found [ 1.232770] hub 1-0:1.0: 8 ports detected [ 1.237226] ehci-platform: EHCI generic platform driver [ 1.242575] uhci_hcd: USB Universal Host Controller Interface driver [ 1.249268] usbcore: registered new interface driver usb-storage [ 1.255506] usbcore: registered new interface driver usbserial [ 1.261452] usbcore: registered new interface driver usbserial_generic [ 1.268104] usbserial: USB Serial support registered for generic [ 1.274564] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.492683] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.498896] ata1: SATA link down (SStatus 0 SControl 300) [ 1.504324] ata2.00: ATA-8: 8GB NANDrive, D A421F2, max UDMA/133 [ 1.510348] ata2.00: 15649200 sectors, multi 0: LBA48 [ 1.515960] ata2.00: configured for UDMA/133 [ 1.520404] scsi 1:0:0:0: Direct-Access ATA 8GB NANDrive D A4 PQ: 0 ANSI: 5 [ 1.529053] sd 1:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 1.536812] sd 1:0:0:0: [sda] Write Protect is off [ 1.541642] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.548226] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.552477] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.565959] mousedev: PS/2 mouse device common for all mice [ 1.581397] rtc_cmos 00:03: RTC can wake from S4 [ 1.581403] sda: sda1 sda2 < sda5 sda6 sda7 > sda3 [ 1.592545] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.593162] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.595747] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.595795] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.596432] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 1.596468] iTCO_wdt: Found a Atom C2000 SoC TCO device (Version=3, TCOBASE=0x0460) [ 1.596670] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1) [ 1.596727] iTCO_vendor_support: vendor-support=0 [ 1.596793] sdhci: Secure Digital Host Controller Interface driver [ 1.596794] sdhci: Copyright(c) Pierre Ossman [ 1.597046] hidraw: raw HID events driver (C) Jiri Kosina [ 1.597873] usbcore: registered new interface driver usbhid [ 1.597874] usbhid: USB HID core driver [ 1.597876] vc: board overwrite '' [ 1.597877] vc: found edge500 [ 1.597990] vc: found w83627dhg sio (id=0xa025) [ 1.598025] vc: hwm @a00 [ 1.598231] vc: gpio3x 0xfd [ 1.599922] i2c-gpio i2c-gpio.2: using pins 13 (SDA) and 14 (SCL) [ 1.691669] hub 1-1:1.0: USB hub found [ 1.695606] hub 1-1:1.0: 4 ports detected [ 1.699905] leds 2-0020: i2c index 0 [ 1.709789] leds 2-0024: i2c index 1 [ 1.719511] leds 2-0064: i2c index 2 [ 1.723312] AMD IOMMUv2 driver by Joerg Roedel [ 1.729775] AMD IOMMUv2 functionality not available on this system [ 1.736032] gre: GRE over IPv4 demultiplexor driver [ 1.740938] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.746844] NET: Registered protocol family 10 [ 1.751649] NET: Registered protocol family 17 [ 1.756144] Bridge firewalling registered [ 1.760190] 8021q: 802.1Q VLAN Support v1.8 [ 1.765298] registered taskstats version 1 [ 1.769906] rtc_cmos 00:03: setting system clock to 2019-03-31 01:19:09 UTC (1553995149) [ 1.779409] EXT4-fs (sda7): INFO: recovery required on readonly filesystem [ 1.786584] EXT4-fs (sda7): write access will be enabled during recovery [ 1.804596] tsc: Refined TSC clocksource calibration: 1749.999 MHz [ 1.837483] EXT4-fs (sda7): recovery complete [ 1.843670] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 1.851616] VFS: Mounted root (ext4 filesystem) readonly on device 8:7. [ 1.858849] Freeing unused kernel memory: 764K (ffffffff816d6000 - ffffffff81795000) procd: Console is alive procd: - watchdog - [ 2.207417] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k [ 2.214700] igb: Copyright (c) 2007-2013 Intel Corporation. [ 2.220784] igb 0000:00:14.0: found custom link: 0x6535 [ 2.264767] igb 0000:00:14.0: added PHC on eth0 [ 2.269490] igb 0000:00:14.0: Intel(R) Gigabit Ethernet Network Connection [ 2.276719] igb 0000:00:14.0: eth0: PBA No: 002100-000 [ 2.282061] igb 0000:00:14.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) [ 2.290222] igb 0000:00:14.1: found custom link: 0x6535 [ 2.334309] libphy: mdio-dsa: probed [ 2.338137] Distributed Switch Architecture driver version 0.1 [ 2.344164] eth1[0]: detected a Marvell m88e6176 switch [ 2.369910] libphy: dsa slave smi: probed [ 2.404984] igb 0000:00:14.1: added PHC on eth1 [ 2.409643] igb 0000:00:14.1: Intel(R) Gigabit Ethernet Network Connection [ 2.416826] igb 0000:00:14.1: eth1: PBA No: 002100-000 [ 2.422141] igb 0000:00:14.1: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) [ 2.430293] igb 0000:00:14.2: found custom link: 0x6535 [ 2.474602] igb 0000:00:14.2: added PHC on eth2 [ 2.479303] igb 0000:00:14.2: Intel(R) Gigabit Ethernet Network Connection [ 2.486515] igb 0000:00:14.2: eth2: PBA No: 002100-000 [ 2.491821] igb 0000:00:14.2: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) [ 2.499927] igb 0000:00:14.3: found custom link: 0x6535 [ 2.544912] igb 0000:00:14.3: added PHC on eth3 [ 2.549642] igb 0000:00:14.3: Intel(R) Gigabit Ethernet Network Connection [ 2.556861] igb 0000:00:14.3: eth3: PBA No: 002100-000 [ 2.562210] igb 0000:00:14.3: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) [ 2.571038] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver procd: - preinit - Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 2.810483] Switched to clocksource tsc mounting /dev/ro[ 5.637637] EXT4-fs (sda7): re-mounted. Opts: (null) ot procd: - early - procd: - watchdog - [ 5.720373] random: nonblocking pool is initialized Failed to connect to ubus procd: - ubus - procd: - init - [ 6.232324] Fixing /dev/root to point to /dev/sda7 () [ 6.245218] vcearlyinit: TSC measured at 1749.999 MHz (none) login: [ 6.324246] Loading modules backported from Linux version master-2014-11-04-0-gf3660a2 [ 6.332505] Backport generated by backports.git backports-20141023-2-g4ff890b [ 6.345117] cfg80211: Calling CRDA to update world regulatory domain [ 6.351762] cfg80211: World regulatory domain updated: [ 6.356988] cfg80211: DFS Master region: unset [ 6.361438] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 6.371350] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 6.379491] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 6.387583] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 6.395675] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 6.403788] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 6.413610] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 6.422038] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 6.430288] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 6.578659] cfg80211: Calling CRDA for country: US [ 6.583772] cfg80211: Regulatory domain changed to country: US [ 6.589766] cfg80211: DFS Master region: FCC [ 6.594069] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 6.603986] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A) [ 6.612347] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A) [ 6.612435] ieee80211 phy0: Atheros AR9300 Rev:4 mem=0xffffc90004340000, irq=16 [ 6.629816] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s) [ 6.639688] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) [ 6.647883] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 7.643582] vcearlyinit: Re-generated network configuration from policy [ 7.719467] EXT4-fs (sda1): recovery complete [ 7.724023] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: [ 7.795408] EXT4-fs (sda3): recovery complete [ 7.803932] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: [ 7.944513] loop: module loaded [ 7.953918] tun: Universal TUN/TAP device driver, 1.6 [ 7.959083] tun: (C) 1999-2004 Max Krasnyansky [ 7.981785] ipip: IPv4 over IPv4 tunneling driver [ 7.998255] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.19.1-k [ 8.006229] ixgbe: Copyright (c) 1999-2013 Intel Corporation. [ 8.022032] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 8.029669] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 8.037300] Netfilter messages via NETLINK v0.30. [ 8.042788] ip_set: protocol 6 [ 8.051831] w83627ehf: Found W83627DHG chip at 0xa00 [ 8.168399] u32 classifier [ 8.171219] input device check on [ 8.174941] Actions configured [ 8.206504] Mirror/redirect action on [ 8.430462] netem: version 1.3 [ 8.535601] usbcore: registered new interface driver ark3116 [ 8.542936] usbserial: USB Serial support registered for ark3116 [ 8.549668] arp_tables: (C) 2002 David S. Miller [ 8.555528] usbcore: registered new interface driver belkin_sa [ 8.561723] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter [ 8.573110] usbcore: registered new interface driver cdc_wdm [ 8.579335] usbcore: registered new interface driver ch341 [ 8.585087] usbserial: USB Serial support registered for ch341-uart [ 8.592565] usbcore: registered new interface driver cp210x [ 8.598354] usbserial: USB Serial support registered for cp210x [ 8.605921] usbcore: registered new interface driver cypress_m8 [ 8.612063] usbserial: USB Serial support registered for DeLorme Earthmate USB [ 8.619495] usbserial: USB Serial support registered for HID->COM RS232 Adapter [ 8.627034] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter [ 8.635825] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 8.642983] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 8.650838] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 8.656771] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 8.663764] usbcore: registered new interface driver ftdi_sio [ 8.669804] usbserial: USB Serial support registered for FTDI USB Serial Device [ 8.679762] usbcore: registered new interface driver keyspan [ 8.685699] usbserial: USB Serial support registered for Keyspan - (without firmware) [ 8.693800] usbserial: USB Serial support registered for Keyspan 1 port adapter [ 8.701427] usbserial: USB Serial support registered for Keyspan 2 port adapter [ 8.708992] usbserial: USB Serial support registered for Keyspan 4 port adapter [ 8.716995] lib80211: common routines for IEEE802.11 drivers [ 8.724403] usbcore: registered new interface driver mct_u232 [ 8.730435] usbserial: USB Serial support registered for MCT U232 [ 8.737222] usbcore: registered new interface driver mos7720 [ 8.743167] usbserial: USB Serial support registered for Moschip 2 port adapter [ 8.760963] ctnetlink v0.93: registering with nfnetlink. [ 8.785124] usbcore: registered new interface driver oti6858 [ 8.791026] usbserial: USB Serial support registered for oti6858 [ 8.797826] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 8.805372] usbcore: registered new interface driver pl2303 [ 8.811236] usbserial: USB Serial support registered for pl2303 [ 8.817801] usbcore: registered new interface driver sierra [ 8.823664] usbserial: USB Serial support registered for Sierra USB modem [ 8.831583] usbcore: registered new interface driver ti_usb_3410_5052 [ 8.838335] usbserial: USB Serial support registered for TI USB 3410 1 port adapter [ 8.846283] usbserial: USB Serial support registered for TI USB 5052 2 port adapter [ 8.857627] usbcore: registered new interface driver visor [ 8.863319] usbserial: USB Serial support registered for Handspring Visor / Palm OS [ 8.871244] usbserial: USB Serial support registered for Sony Clie 5.0 [ 8.878022] usbserial: USB Serial support registered for Sony Clie 3.5 [ 8.923771] xt_time: kernel timezone is -0000 [ 8.929595] usbcore: registered new interface driver asix [ 8.935888] usbcore: registered new interface driver cdc_ether [ 8.942835] usbcore: registered new interface driver ipw [ 8.948533] usbserial: USB Serial support registered for IPWireless converter [ 8.960323] usbcore: registered new interface driver option [ 8.966106] usbserial: USB Serial support registered for GSM modem (1-port) [ 8.974276] PPP generic driver version 2.4.2 [ 8.979362] NET: Registered protocol family 24 [ 8.984480] usbcore: registered new interface driver qcserial [ 8.990693] usbserial: USB Serial support registered for Qualcomm USB modem [ 8.998544] usbcore: registered new interface driver qmi_wwan [ 9.005316] usbcore: registered new interface driver rndis_host [ 9.012081] usbcore: registered new interface driver sierra_net [ 10.459579] Setting eth2 to autoneg on [ 10.480574] igb 0000:00:14.2: Unsupported Duplex Mode [ 10.486465] Setting eth0 to autoneg on [ 10.501115] igb 0000:00:14.0: Unsupported Duplex Mode [ 10.786489] IPv6: ADDRCONF(NETDEV_UP): lo: link is not ready [ 10.793087] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 10.799987] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.806646] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 10.818550] IPv6: ADDRCONF(NETDEV_UP): sw3: link is not ready [ 10.827556] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 10.860704] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 10.866704] 8021q: adding VLAN 0 to HW filter on device eth1 [ 10.872521] igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 10.880069] IPv6: ADDRCONF(NETDEV_UP): sw3: link is not ready [ 10.890482] device sw3 entered promiscuous mode [ 10.895099] device eth1 entered promiscuous mode [ 10.901884] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 10.911142] IPv6: ADDRCONF(NETDEV_UP): br-network0: link is not ready [ 10.919752] IPv6: ADDRCONF(NETDEV_UP): sw2: link is not ready [ 10.928725] IPv6: ADDRCONF(NETDEV_UP): sw2: link is not ready [ 10.940119] device sw2 entered promiscuous mode [ 10.946968] IPv6: ADDRCONF(NETDEV_UP): sw1: link is not ready [ 10.954258] IPv6: ADDRCONF(NETDEV_UP): sw1: link is not ready [ 10.966741] device sw1 entered promiscuous mode [ 10.976586] IPv6: ADDRCONF(NETDEV_UP): sw0: link is not ready [ 10.985418] IPv6: ADDRCONF(NETDEV_UP): sw0: link is not ready [ 11.012514] device sw0 entered promiscuous mode [ 11.047593] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 11.053602] 8021q: adding VLAN 0 to HW filter on device eth2 [ 11.090964] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.096932] 8021q: adding VLAN 0 to HW filter on device eth0 [ 11.133654] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 11.139631] 8021q: adding VLAN 0 to HW filter on device eth3 [ 11.422266] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 11.428726] device wlan0 entered promiscuous mode [ 11.433660] br-network0: port 5(wlan0) entered forwarding state [ 11.439715] br-network0: port 5(wlan0) entered forwarding state [ 11.445835] IPv6: ADDRCONF(NETDEV_CHANGE): br-network0: link becomes ready [ 11.530089] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready procd: - init complete - [ 13.440701] br-network0: port 5(wlan0) entered forwarding state Processor Type: Intel(R) Atom(TM) CPU C2358 @ 1.74GHz rocessor SpeedPassword: Memory: 4096MB (DDR3 1333) USB Devices total: 0 KBDs, 0 MICE, 0 MASS, 1 HUBs Detected ATA/ATAPI Devices... Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc. CASwell, Inc. COB-G800-000 Rev.:R1.00 ( 20141209 ) Press or to enter setup. Press to enter BBS POPUP. GNU GRUB version 2.02~beta2 +----------------------------------------------------------------------------+ |*Latest Velocloud Image | | Force Velocloud Factory Image | | Force Velocloud Root1 | | Force Velocloud Root2 | | | | | | | | | | | | | | | +----------------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. Press enter to boot the selected OS, `e' to edit the commands before booting or `c' for a command-line. ESC to return previous menu. The highlighted entry will be executed automatically in 0s. Booting `Latest Velocloud Image' stamps: root1=0 root2=11 early console in decompress_kernel Decompressing Linux... Parsing ELF... done. Booting the kernel. [ 0.000000] Linux version 3.14.37 (jenkins@build-01.eng.velocloud.net) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r43222) ) #1 SMP Tue Jun 30 18:32:56 PDT 2015 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz root=/dev/sda7 rootfstype=ext4 rootwait earlyprintk=serial,ttyS0,115200 panic_timeout=5 console=tty0 console=ttyS0,115200n8 noinitrd vcimg=2 crashkernel=2G-:128M [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007e96cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007e96d000-0x000000007e99cfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007e99d000-0x000000007ebc6fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ebc7000-0x000000007f42efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007f42f000-0x000000007f63dfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f63e000-0x000000007f7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0x7f800 max_arch_pfn = 0x400Login incorrect vc-edge login: 000000 [Password: 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff] [ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff] [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7e96cfff] [ 0.000000] init_memory_mapping: [mem 0x7e99d000-0x7ebc6fff] [ 0.000000] init_memory_mapping: [mem 0x7f63e000-0x7f7fffff] [ 0.000000] ACPI: RSDP 00000000000f04a0 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 000000007ec1a088 00008C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 000000007ec1d1c8 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 000000007ec1a1a8 00301C (v02 ALASKA A M I 01072009 INTL 20061109) [ 0.000000] ACPI: FACS 000000007f42cf80 000040 [ 0.000000] ACPI: FPDT 000000007ec1d2d8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 000000007ec1d320 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: WDAT 000000007ec1d360 0001AC (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: UEFI 000000007ec1d510 000042 (v01 00000000 00000000) [ 0.000000] ACPI: APIC 000000007ec1d558 000068 (v03 INTEL TIANO 00000001 MSFT 00000000) [ 0.000000] ACPI: BDAT 000000007ec1d5c0 000030 (v01 00000000 00000000) [ 0.000000] ACPI: HPET 000000007ec1d5f0 000038 (v01 INTEL 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000007ec1d628 0009F1 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: HEST 000000007ec1e020 0000A8 (v01 INTEL AVOTON B 00000001 INTL 00000001) [ 0.000000] ACPI: BERT 000000007ec1e0c8 000030 (v01 INTEL AVOTON B 00000001 INTL 00000001) [ 0.000000] ACPI: ERST 000000007ec1e0f8 000230 (v01 INTEL AVOTON B 00000001 INTL 00000001) [ 0.000000] ACPI: EINJ 000000007ec1e328 000150 (v01 INTEL AVOTON B 00000001 INTL 00000001) [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x17fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00099fff] [ 0.000000] node 0: [mem 0x00100000-0x7e96cfff] [ 0.000000] node 0: [mem 0x7e99d000-0x7ebc6fff] [ 0.000000] node 0: [mem 0x7f63e000-0x7f7fffff] [ 0.000000] node 0: [mem 0x100000000-0x17fffffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] e820: [mem 0x7f800000-0xdfffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88017fc00000 s70208 r8192 d24000 u1048576 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1027367 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz root=/dev/sda7 rootfstype=ext4 rootwait earlyprintk=serial,ttyS0,115200 panic_timeout=5 console=tty0 console=ttyS0,115200n8 noinitrd vcimg=2 crashkernel=2G-:128M [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] DeLogin incorrect vc-edge login: ntry cache hash table entries: 524288 (order: 10, 4194304 by 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 4028352K/4174792K available (4919K kernel code, 443K rwdata, 1628K rodata, 764K init, 492K bss, 146440K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:4352 nr_irqs:512 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1750.001 MHz processor [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3500.00 BogoMIPS (lpj=1750001) [ 0.010649] pid_max: default: 32768 minimum: 301 [ 0.015284] ACPI: Core revision 20131218 [ 0.022424] ACPI: All ACPI Tables successfully acquired [ 0.028265] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.035000] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.042420] Initializing cgroup subsys devices [ 0.046879] Initializing cgroup subsys net_cls [ 0.051338] Initializing cgroup subsys blkio [ 0.055646] CPU: Physical Processor ID: 0 [ 0.059674] CPU: Processor Core ID: 0 [ 0.067936] mce: CPU supports 6 MCE banks [ 0.071968] CPU0: Thermal monitoring enabled (TM1) [ 0.076776] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.076776] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0 [ 0.076776] tlb_flushall_shift: 6 [ 0.091801] Freeing SMP alternatives memory: 20K (ffffffff81795000 - ffffffff8179a000) [ 0.100217] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.116235] smpboot: CPU0: Intel(R) Atom(TM) CPU C2358 @ 1.74GHz (fam: 06, model: 4d, stepping: 08) [ 0.125542] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver. [ 0.135933] ... version: 3 [ 0.139953] ... bit width: 40 [ 0.144060] ... generic registers: 2 [ 0.148079] ... value mask: 000000ffffffffff [ 0.153391] ... max period: 000000ffffffffff [ 0.158702] ... fixed-purpose events: 3 [ 0.162712] ... event mask: 0000000700000003 [ 0.168415] x86: Booting SMP configuration: [ 0.172612] .... node #0, CPUs: #1 [ 0.194115] x86: Booted up 1 node, 2 CPUs [ 0.198330] smpboot: Total of 2 processors activated (7000.00 BogoMIPS) [ 0.205934] pinctrl core: initialized pinctrl subsystem [ 0.211254] NET: Registered protocol family 16 [ 0.216362] cpuidle: using governor ladder [ 0.220466] cpuidle: using governor menu [ 0.224503] ACPI: bus type PCI registered [ 0.228747] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.238060] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.244850] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!) [ 0.254983] PCI: Using configuration type 1 for base access [ 0.269111] bio: create slab at 0 [ 0.273357] ACPI: Added _OSI(Module Device) [ 0.277549] ACPI: Added _OSI(Processor Device) [ 0.282002] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.286715] ACPI: Added _OSI(Processor Aggregator Device) [ 0.297351] ACPI: Interpreter enabled [ 0.301031] ACPI: (supports S0 S5) [ 0.304442] ACPI: Using IOAPIC for interrupt routing [ 0.309541] PCI: Using host bridge windows from ACPI; if necessary, use "pci=n vc-edge login: (IRQs 6 7 10 *11 12 15) 0.439047] ACPI: Password: 0.446827] ACPI: PCI Interrupt Link [LNKC] (IRQs 6 7 10 *11 12 15) [ 0.453427] ACPI: PCI Interrupt Link [LNKD] (IRQs 6 *7 10 11 12 15) [ 0.460021] ACPI: PCI Interrupt Link [LNKE] (IRQs 6 7 *10 11 12 15) [ 0.466606] ACPI: PCI Interrupt Link [LNKF] (IRQs 6 *7 10 11 12 15) [ 0.473192] ACPI: PCI Interrupt Link [LNKG] (IRQs 6 7 10 *11 12 15) [ 0.479785] ACPI: PCI Interrupt Link [LNKH] (IRQs 6 7 *10 11 12 15) [ 0.486937] ACPI: Enabled 1 GPEs in block 00 to 1F [ 0.492036] vgaarb: loaded [ 0.494984] SCSI subsystem initialized [ 0.499127] ACPI: bus type USB registered [ 0.503271] usbcore: registered new interface driver usbfs [ 0.508823] usbcore: registered new interface driver hub [ 0.514218] usbcore: registered new device driver usb [ 0.519562] pps_core: LinuxPPS API ver. 1 registered [ 0.524533] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.533710] PTP clock support registered [ 0.537940] PCI: Using ACPI for IRQ routing [ 0.543320] pci 0000:00:16.0: no compatible bridge window for [mem 0xfd000000-0xfd0003ff] [ 0.551982] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.556975] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.564844] Switched to clocksource hpet [ 0.568939] pnp: PnP ACPI init [ 0.572026] ACPI: bus type PNP registered [ 0.576590] system 00:01: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.583564] system 00:01: [mem 0x7f800000-0x7fffffff] could not be reserved [ 0.590683] system 00:02: [io 0x0680-0x069f] has been reserved [ 0.596622] system 00:02: [io 0x0400-0x047f] could not be reserved [ 0.602899] system 00:02: [io 0x0500-0x05fe] has been reserved [ 0.608844] system 00:02: [mem 0xfed00000-0xfedfffff] could not be reserved [ 0.615819] system 00:02: [mem 0x000c0000-0x000dffff] has been reserved [ 0.622447] system 00:02: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.629421] system 00:02: [mem 0xffa00000-0xffffffff] has been reserved [ 0.636041] system 00:02: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.643093] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 0.649024] system 00:04: [io 0x0a10-0x0a1f] has been reserved [ 0.656275] pnp: PnP ACPI: found 7 devices [ 0.660390] ACPI: bus type PNP unregistered [ 0.674681] pci 0000:00:16.0: BAR 0: assigned [mem 0x80000000-0x800003ff] [ 0.681489] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.686472] pci 0000:00:01.0: bridge window [mem 0xdfd00000-0xdfdfffff] [ 0.693278] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.698264] pci 0000:00:03.0: PCI bridge to [bus 03] [ 0.703253] pci 0000:00:04.0: PCI bridge to [bus 04] [ 0.708321] NET: Registered protocol family 2 [ 0.713051] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.720393] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.727195] TCP: Hash tables configured (established 32768 bind 32768) [ 0.733787] TCP: reno registered [ 0.737037] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.743089] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.749663] NET: Registered protocol family 1 [ 0.754168] RPC: Registered named UNIX socket transport module. [ 0.760104] RPC: Registered udp transport module. [ 0.764821] RPC: Registered tcp transport module. [ 0.769532] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.787117] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.793583] software IO TLB [mem 0x7a96d000-0x7e96d000] (64MB) mapped at [ffff88007a96d000-ffff88007e96cfff] [ 0.803757] microcode: CPU0 sig=0x406d8, pf=0x1, revision=0x125 [ 0.809699] microcode: CPU1 sig=0x406d8, pf=0x1, revision=0x125 [ 0.815705] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.824677] SSE version of gcm_enc/dec engaged. [ 0.830302] futex hash table entries: 512 (order:Login incorrect vc-edge login: 3, 32768 bytes) [ 0Password: 0.849874] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.856321] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.866350] msgmni has been set to 7867 [ 0.870498] io scheduler noop registered [ 0.874439] io scheduler deadline registered (default) [ 0.879697] pcu_gpio 0000:00:1f.0: gbase is 0x503 [ 0.884576] pcu_gpio 0000:00:1f.0: abase is 0x403 [ 0.889301] pcu_gpio 0000:00:1f.0: pbase is 0xfed03002 [ 0.895714] pcieport 0000:00:04.0: can't derive routing for PCI INT A [ 0.902168] pcieport 0000:00:04.0: PCI INT A: no GSI [ 0.907645] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 0.914618] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.921185] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 0.928181] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt [ 0.935174] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt [ 0.942355] ipmi message handler version 39.2 [ 0.946729] ipmi device interface [ 0.950204] IPMI System Interface driver. [ 0.954395] ipmi_si: Adding default-specified kcs state machine [ 0.960352] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 0.970360] ipmi_si: Interface detection failed [ 0.979793] ipmi_si: Adding default-specified smic state machine [ 0.985844] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 [ 0.995936] ipmi_si: Interface detection failed [ 1.004787] ipmi_si: Adding default-specified bt state machine [ 1.010660] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 [ 1.020493] ipmi_si: Interface detection failed [ 1.030041] ipmi_si: Unable to find any System Interface(s) [ 1.035628] IPMI Watchdog: driver initialized [ 1.039996] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 1.048494] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled ¦[ 1.075693] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.103891] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.112006] Non-volatile memory driver v1.3 [ 1.116207] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 1.125171] Hangcheck: Using getrawmonotonic(). [ 1.140768] ahci 0000:00:18.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.148874] ahci 0000:00:18.0: flags: 64bit ncq led clo pio sxs deso sadm sds apst [ 1.157579] scsi0 : ahci [ 1.160448] scsi1 : ahci [ 1.163206] ata1: SATA max UDMA/133 abar m2048@0xdff35000 port 0xdff35100 irq 44 [ 1.170613] ata2: SATA max UDMA/133 abar m2048@0xdff35000 port 0xdff35180 irq 44 [ 1.179178] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.185722] ehci-pci: EHCI PCI platform driver [ 1.190338] ehci-pci 0000:00:16.0: EHCI Host Controller [ 1.195590] ehci-pci 0000:00:16.0: new USB bus registered, assigned bus number 1 [ 1.203015] ehci-pci 0000:00:16.0: debug port 2 [ 1.211502] ehci-pci 0000:00:16.0: irq 23, io mem 0x80000000 [ 1.222735] ehci-pci 0000:00:16.0: USB 2.0 started, EHCI 1.00 [ 1.228984] hub 1-0:1.0: USB hub found [ 1.232770] hub 1-0:1.0: 8 ports detected [ 1.237226] ehci-platform: EHCI generic platform driver [ 1.242575] uhci_hcd: USB Universal Host Controller Interface driver [ 1.249268] usbcore: registered new interface driver usb-storage [ 1.255506] usbcore: registered new interface driver usbserial [ 1.261452] usbcore: registered new interface driver usbserial_generic [ 1.268104] usbserial: USB Serial support registered for generic [ 1.274564] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.492683] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.498896] ata1: SATA Login incorrect vc-edge login: link down (SStatus 0 SControl 300) [ Password: [ 1.510348] ata2.00: 15649200 sectors, multi 0: LBA48 [ 1.515960] ata2.00: configured for UDMA/133 [ 1.520404] scsi 1:0:0:0: Direct-Access ATA 8GB NANDrive D A4 PQ: 0 ANSI: 5 [ 1.529053] sd 1:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 1.536812] sd 1:0:0:0: [sda] Write Protect is off [ 1.541642] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.548226] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.552477] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.565959] mousedev: PS/2 mouse device common for all mice [ 1.581397] rtc_cmos 00:03: RTC can wake from S4 [ 1.581403] sda: sda1 sda2 < sda5 sda6 sda7 > sda3 [ 1.592545] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.593162] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.595747] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.595795] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.596432] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 1.596468] iTCO_wdt: Found a Atom C2000 SoC TCO device (Version=3, TCOBASE=0x0460) [ 1.596670] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1) [ 1.596727] iTCO_vendor_support: vendor-support=0 [ 1.596793] sdhci: Secure Digital Host Controller Interface driver [ 1.596794] sdhci: Copyright(c) Pierre Ossman [ 1.597046] hidraw: raw HID events driver (C) Jiri Kosina [ 1.597873] usbcore: registered new interface driver usbhid [ 1.597874] usbhid: USB HID core driver [ 1.597876] vc: board overwrite '' [ 1.597877] vc: found edge500 [ 1.597990] vc: found w83627dhg sio (id=0xa025) [ 1.598025] vc: hwm @a00 [ 1.598231] vc: gpio3x 0xfd [ 1.599922] i2c-gpio i2c-gpio.2: using pins 13 (SDA) and 14 (SCL) [ 1.691669] hub 1-1:1.0: USB hub found [ 1.695606] hub 1-1:1.0: 4 ports detected [ 1.699905] leds 2-0020: i2c index 0 [ 1.709789] leds 2-0024: i2c index 1 [ 1.719511] leds 2-0064: i2c index 2 [ 1.723312] AMD IOMMUv2 driver by Joerg Roedel [ 1.729775] AMD IOMMUv2 functionality not available on this system [ 1.736032] gre: GRE over IPv4 demultiplexor driver [ 1.740938] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.746844] NET: Registered protocol family 10 [ 1.751649] NET: Registered protocol family 17 [ 1.756144] Bridge firewalling registered [ 1.760190] 8021q: 802.1Q VLAN Support v1.8 [ 1.765298] registered taskstats version 1 [ 1.769906] rtc_cmos 00:03: setting system clock to 2019-03-31 01:19:09 UTC (1553995149) [ 1.779409] EXT4-fs (sda7): INFO: recovery required on readonly filesystem [ 1.786584] EXT4-fs (sda7): write access will be enabled during recovery [ 1.804596] tsc: Refined TSC clocksource calibration: 1749.999 MHz [ 1.837483] EXT4-fs (sda7): recovery complete [ 1.843670] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 1.851616] VFS: Mounted root (ext4 filesystem) readonly on device 8:7. [ 1.858849] Freeing unused kernel memory: 764K (ffffffff816d6000 - ffffffff81795000) procd: Console is alive procd: - watchdog - [ 2.207417] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k [ 2.214700] igb: Copyright (c) 2007-2013 Intel Corporation. [ 2.220784] igb 0000:00:14.0: found custom link: 0x6535 [ 2.264767] igb 0000:00:14.0: added PHC on eth0 [ 2.269490] igb 0000:00:14.0: Intel(R) Gigabit Ethernet Network Connection [ 2.276719] igb 0000:00:14.0: eth0: PBA No: 002100-000 [ 2.282061] igb 0000:00:14.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) [ 2.290222] igb 0000:00:14.1: found custom link: 0x6535 [ 2.334309] libphy: mdio-dsa: probed [ 2.338137] Distributed Switch Architecture driver version 0.1 [ 2.344164] eth1[0]: detected a Marvell m88e6176 switch [ 2.369910] libphy: dsa slave smi: probed d PHC on eth1] igb 0000:00:14.1: addeLogin incorrect [ 2.409643] igb 0000:00:14.1: Intel(R) Gigabit Ethernet Network Connection [ 2.416826] igb 0000:00:14.1: eth1: PBA No: 002100-000 [ 2.422141] igb 0000:00:14.1: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) [ 2.430293] igb 0000:00:14.2: found custom link: 0x6535 [ 2.474602] igb 0000:00:14.2: added PHC on eth2 [ 2.479303] igb 0000:00:14.2: Intel(R) Gigabit Ethernet Network Connection [ 2.486515] igb 0000:00:14.2: eth2: PBA No: 002100-000 [ 2.491821] igb 0000:00:14.2: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) [ 2.499927] igb 0000:00:14.3: found custom link: 0x6535 [ 2.544912] igb 0000:00:14.3: added PHC on eth3 [ 2.549642] igb 0000:00:14.3: Intel(R) Gigabit Ethernet Network Connection [ 2.556861] igb 0000:00:14.3: eth3: PBA No: 002100-000 [ 2.562210] igb 0000:00:14.3: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) [ 2.571038] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver procd: - preinit - Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 2.810483] Switched to clocksource tsc mounting /dev/ro[ 5.637637] EXT4-fs (sda7): re-mounted. Opts: (null) ot procd: - early - procd: - watchdog - [ 5.720373] random: nonblocking pool is initialized Failed to connect to ubus procd: - ubus - procd: - init - [ 6.232324] Fixing /dev/root to point to /dev/sda7 () [ 6.245218] vcearlyinit: TSC measured at 1749.999 MHz (none) login: [ 6.324246] Loading modules backported from Linux version master-2014-11-04-0-gf3660a2 [ 6.332505] Backport generated by backports.git backports-20141023-2-g4ff890b [ 6.345117] cfg80211: Calling CRDA to update world regulatory domain [ 6.351762] cfg80211: World regulatory domain updated: [ 6.356988] cfg80211: DFS Master region: unset [ 6.361438] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 6.371350] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 6.379491] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 6.387583] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 6.395675] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 6.403788] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 6.413610] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 6.422038] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 6.430288] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 6.578659] cfg80211: Calling CRDA for country: US [ 6.583772] cfg80211: Regulatory domain changed to country: US [ 6.589766] cfg80211: DFS Master region: FCC [ 6.594069] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 6.603986] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A) [ 6.612347] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A) [ 6.612435] ieee80211 phy0: Atheros AR9300 Rev:4 mem=0xffffc90004340000, irq=16 [ 6.629816] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s) [ 6.639688] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) [ 6.647883] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 7.643582] vcearlyinit: Re-generated network configuration from policy [ 7.719467] EXT4-fs (sda1): recovery complete [ 7.724023] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: [ 7.795408] EXT4-fs (sda3): recovery complete [ 7.803932] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: [ 7.944513] loop: module loaded [ 7.953918] tun: Universal TUN/TAP device vc-edge login: ver cdc_wdm 8.579335] usbcorPassword: 585087] usbserial: USB Serial support registered for ch341-uart [ 8.592565] usbcore: registered new interface driver cp210x [ 8.598354] usbserial: USB Serial support registered for cp210x [ 8.605921] usbcore: registered new interface driver cypress_m8 [ 8.612063] usbserial: USB Serial support registered for DeLorme Earthmate USB [ 8.619495] usbserial: USB Serial support registered for HID->COM RS232 Adapter [ 8.627034] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter [ 8.635825] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 8.642983] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 8.650838] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 8.656771] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 8.663764] usbcore: registered new interface driver ftdi_sio [ 8.669804] usbserial: USB Serial support registered for FTDI USB Serial Device [ 8.679762] usbcore: registered new interface driver keyspan [ 8.685699] usbserial: USB Serial support registered for Keyspan - (without firmware) [ 8.693800] usbserial: USB Serial support registered for Keyspan 1 port adapter [ 8.701427] usbserial: USB Serial support registered for Keyspan 2 port adapter [ 8.708992] usbserial: USB Serial support registered for Keyspan 4 port adapter [ 8.716995] lib80211: common routines for IEEE802.11 drivers [ 8.724403] usbcore: registered new interface driver mct_u232 [ 8.730435] usbserial: USB Serial support registered for MCT U232 [ 8.737222] usbcore: registered new interface driver mos7720 [ 8.743167] usbserial: USB Serial support registered for Moschip 2 port adapter [ 8.760963] ctnetlink v0.93: registering with nfnetlink. [ 8.785124] usbcore: registered new interface driver oti6858 [ 8.791026] usbserial: USB Serial support registered for oti6858 [ 8.797826] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 8.805372] usbcore: registered new interface driver pl2303 [ 8.811236] usbserial: USB Serial support registered for pl2303 [ 8.817801] usbcore: registered new interface driver sierra [ 8.823664] usbserial: USB Serial support registered for Sierra USB modem [ 8.831583] usbcore: registered new interface driver ti_usb_3410_5052 [ 8.838335] usbserial: USB Serial support registered for TI USB 3410 1 port adapter [ 8.846283] usbserial: USB Serial support registered for TI USB 5052 2 port adapter [ 8.857627] usbcore: registered new interface driver visor [ 8.863319] usbserial: USB Serial support registered for Handspring Visor / Palm OS [ 8.871244] usbserial: USB Serial support registered for Sony Clie 5.0 [ 8.878022] usbserial: USB Serial support registered for Sony Clie 3.5 [ 8.923771] xt_time: kernel timezone is -0000 [ 8.929595] usbcore: registered new interface driver asix [ 8.935888] usbcore: registered new interface driver cdc_ether [ 8.942835] usbcore: registered new interface driver ipw [ 8.948533] usbserial: USB Serial support registered for IPWireless converter [ 8.960323] usbcore: registered new interface driver option [ 8.966106] usbserial: USB Serial support registered for GSM modem (1-port) [ 8.974276] PPP generic driver version 2.4.2 [ 8.979362] NET: Registered protocol family 24 [ 8.984480] usbcore: registered new interface driver qcserial [ 8.990693] usbserial: USB Serial support registered for Qualcomm USB modem [ 8.998544] usbcore: registered new interface driver qmi_wwan [ 9.005316] usbcore: registered new interface driver rndis_host [ 9.012081] usbcore: registered new interface driver sierra_net [ 10.459579] Setting eth2 to autoneg on [ 10.480574] igb 0000:00:14.2: Unsupported Duplex Mode [ 10.486465] Setting eth0 to autoneg on [ 10.501115] igb 0000:00:14.0: Unsupported Duplex Mode [ 10.786489] IPv6: ADDRCONF(NETDEV_UP): lo: link is not ready [ 10.793087] IPv6: ADDRCONF(NETDEV_UP): eth2: link iLogin incorrect vc-edge login: s not ready [ Password: 10.806646] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 10.818550] IPv6: ADDRCONF(NETDEV_UP): sw3: link is not ready [ 10.827556] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 10.860704] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 10.866704] 8021q: adding VLAN 0 to HW filter on device eth1 [ 10.872521] igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 10.880069] IPv6: ADDRCONF(NETDEV_UP): sw3: link is not ready [ 10.890482] device sw3 entered promiscuous mode [ 10.895099] device eth1 entered promiscuous mode [ 10.901884] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 10.911142] IPv6: ADDRCONF(NETDEV_UP): br-network0: link is not ready [ 10.919752] IPv6: ADDRCONF(NETDEV_UP): sw2: link is not ready [ 10.928725] IPv6: ADDRCONF(NETDEV_UP): sw2: link is not ready [ 10.940119] device sw2 entered promiscuous mode [ 10.946968] IPv6: ADDRCONF(NETDEV_UP): sw1: link is not ready [ 10.954258] IPv6: ADDRCONF(NETDEV_UP): sw1: link is not ready [ 10.966741] device sw1 entered promiscuous mode [ 10.976586] IPv6: ADDRCONF(NETDEV_UP): sw0: link is not ready [ 10.985418] IPv6: ADDRCONF(NETDEV_UP): sw0: link is not ready [ 11.012514] device sw0 entered promiscuous mode [ 11.047593] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 11.053602] 8021q: adding VLAN 0 to HW filter on device eth2 [ 11.090964] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.096932] 8021q: adding VLAN 0 to HW filter on device eth0 [ 11.133654] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 11.139631] 8021q: adding VLAN 0 to HW filter on device eth3 [ 11.422266] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 11.428726] device wlan0 entered promiscuous mode [ 11.433660] br-network0: port 5(wlan0) entered forwarding state [ 11.439715] br-network0: port 5(wlan0) entered forwarding state [ 11.445835] IPv6: ADDRCONF(NETDEV_CHANGE): br-network0: link becomes ready [ 11.530089] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready procd: - init complete - [ 13.440701] br-network0: port 5(wlan0) entered forwarding state Login incorrect vc-edge login: Processor Type: Intel(R) Atom(TM) CPU C2358 @ 1.74GHz ProcessPassword: emory: 4096MB (DDR3 1333) USB Devices total: 0 KBDs, 0 MICE, 0 MASS, 1 HUBs Detected ATA/ATAPI Devices... Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc. CASwell, Inc. COB-G800-000 Rev.:R1.00 ( 20141209 ) Press or to enter setup. Press to enter BBS POPUP. GNU GRUB version 2.02~beta2 +----------------------------------------------------------------------------+ |*Latest Velocloud Image | | Force Velocloud Factory Image | | Force Velocloud Root1 | | Force Velocloud Root2 | | | | | | | | | | | | | | | +----------------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. Press enter to boot the selected OS, `e' to edit the commands before booting or `c' for a command-line. ESC to return previous menu. The highlighted entry will be executed automatically in 0s. Booting `Latest Velocloud Image' stamps: root1=0 root2=11 early console in decompress_kernel Decompressing Linux... Parsing ELF... done. Booting the kernel. [ 0.000000] Linux version 3.14.37 (jenkins@build-01.eng.velocloud.net) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r43222) ) #1 SMP Tue Jun 30 18:32:56 PDT 2015 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz root=/dev/sda7 rootfstype=ext4 rootwait earlyprintk=serial,ttyS0,115200 panic_timeout=5 console=tty0 console=ttyS0,115200n8 noinitrd vcimg=2 crashkernel=2G-:128M [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007e96cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007e96d000-0x000000007e99cfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007e99d000-0x000000007ebc6fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ebc7000-0x000000007f42efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007f42f000-0x000000007f63dfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f63e000-0x000000007f7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0x7f800 max_arch_pfn = 0x400000000 0.000000] found SMP MP-table at [mem 0x000fd6a0-0x000fd6af] mapped at [ffff8800000fd6a0] [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff] [ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff] [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7e96cfff] [ 0.000000] init_memory_mapping: [mem 0x7e99d000-0x7ebc6fff] [ 0.000000] init_memory_mapping: [mem 0x7f63e000-0x7f7fffff] [ 0.000000] ACPI: RSDP 00000000000f04a0 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 000000007ec1a088 00008C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 000000007ec1d1c8 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 000000007ec1a1a8 00301C (v02 ALASKA A M I 01072009 INTL 20061109) [ 0.000000] ACPI: FACS 000000007f42cf80 000040 [ 0.000000] ACPI: FPDT 000000007ec1d2d8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 000000007ec1d320 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: WDAT 000000007ec1d360 0001AC (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: UEFI 000000007ec1d510 000042 (v01 00000000 00000000) [ 0.000000] ACPI: APIC 000000007ec1d558 000068 (v03 INTEL TIANO 00000001 MSFT 00000000) [ 0.000000] ACPI: BDAT 000000007ec1d5c0 000030 (v01 00000000 00000000) [ 0.000000] ACPI: HPET 000000007ec1d5f0 000038 (v01 INTEL 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000007ec1d628 0009F1 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: HEST 000000007ec1e020 0000A8 (v01 INTEL AVOTON B 00000001 INTL 00000001) [ 0.000000] ACPI: BERT 000000007ec1e0c8 000030 (v01 INTEL AVOTON B 00000001 INTL 00000001) [ 0.000000] ACPI: ERST 000000007ec1e0f8 000230 (v01 INTEL AVOTON B 00000001 INTL 00000001) [ 0.000000] ACPI: EINJ 000000007ec1e328 000150 (v01 INTEL AVOTON B 00000001 INTL 00000001) [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x17fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00099fff] [ 0.000000] node 0: [mem 0x00100000-0x7e96cfff] [ 0.000000] node 0: [mem 0x7e99d000-0x7ebc6fff] [ 0.000000] node 0: [mem 0x7f63e000-0x7f7fffff] [ 0.000000] node 0: [mem 0x100000000-0x17fffffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] e820: [mem 0x7f800000-0xdfffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88017fc00000 s70208 r8192 d24000 u1048576 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1027367 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz root=/dev/sda7 rootfstype=ext4 rootwait earlyprintk=serial,ttyS0,115200 panic_timeout=5 console=tty0 console=ttyS0,115200n8 noinitrd vcimg=2 crashkern vc-edge login: ] tsc: Detected 1750.001 MHz processor 0.000Password: 0.010649] pid_max: default: 32768 minimum: 301 [ 0.015284] ACPI: Core revision 20131218 [ 0.022424] ACPI: All ACPI Tables successfully acquired [ 0.028265] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.035000] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.042420] Initializing cgroup subsys devices [ 0.046879] Initializing cgroup subsys net_cls [ 0.051338] Initializing cgroup subsys blkio [ 0.055646] CPU: Physical Processor ID: 0 [ 0.059674] CPU: Processor Core ID: 0 [ 0.067936] mce: CPU supports 6 MCE banks [ 0.071968] CPU0: Thermal monitoring enabled (TM1) [ 0.076776] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.076776] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0 [ 0.076776] tlb_flushall_shift: 6 [ 0.091801] Freeing SMP alternatives memory: 20K (ffffffff81795000 - ffffffff8179a000) [ 0.100217] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.116235] smpboot: CPU0: Intel(R) Atom(TM) CPU C2358 @ 1.74GHz (fam: 06, model: 4d, stepping: 08) [ 0.125542] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver. [ 0.135933] ... version: 3 [ 0.139953] ... bit width: 40 [ 0.144060] ... generic registers: 2 [ 0.148079] ... value mask: 000000ffffffffff [ 0.153391] ... max period: 000000ffffffffff [ 0.158702] ... fixed-purpose events: 3 [ 0.162712] ... event mask: 0000000700000003 [ 0.168415] x86: Booting SMP configuration: [ 0.172612] .... node #0, CPUs: #1 [ 0.194115] x86: Booted up 1 node, 2 CPUs [ 0.198330] smpboot: Total of 2 processors activated (7000.00 BogoMIPS) [ 0.205934] pinctrl core: initialized pinctrl subsystem [ 0.211254] NET: Registered protocol family 16 [ 0.216362] cpuidle: using governor ladder [ 0.220466] cpuidle: using governor menu [ 0.224503] ACPI: bus type PCI registered [ 0.228747] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.238060] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.244850] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!) [ 0.254983] PCI: Using configuration type 1 for base access [ 0.269111] bio: create slab at 0 [ 0.273357] ACPI: Added _OSI(Module Device) [ 0.277549] ACPI: Added _OSI(Processor Device) [ 0.282002] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.286715] ACPI: Added _OSI(Processor Aggregator Device) [ 0.297351] ACPI: Interpreter enabled [ 0.301031] ACPI: (supports S0 S5) [ 0.304442] ACPI: Using IOAPIC for interrupt routing [ 0.309541] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.329334] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.335536] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.344269] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.352592] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.363212] PCI host bridge to bus 0000:00 [ 0.367327] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.372818] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.379002] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.385189] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.392068] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff] [ 0.398946] pci_bus 0000:00: root bus resource [mem 0x180000000-0xfffffffff] [ 0.412036] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.417136] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.422227] pci 0000:00:03.0: PCI bridge to [bus 03] [ 0.427317] pci 0000:00:04.0: PCI bridge to [bus 04] [ 0.432459] ACPI: PCI InterrupLogin incorrect vc-edge login: t Link [LNKA] (IRQs 6 7 10 *11 12 15) Password: 0.446827] ACPI: PCI Interrupt Link [LNKC] (IRQs 6 7 10 *11 12 15) [ 0.453427] ACPI: PCI Interrupt Link [LNKD] (IRQs 6 *7 10 11 12 15) [ 0.460021] ACPI: PCI Interrupt Link [LNKE] (IRQs 6 7 *10 11 12 15) [ 0.466606] ACPI: PCI Interrupt Link [LNKF] (IRQs 6 *7 10 11 12 15) [ 0.473192] ACPI: PCI Interrupt Link [LNKG] (IRQs 6 7 10 *11 12 15) [ 0.479785] ACPI: PCI Interrupt Link [LNKH] (IRQs 6 7 *10 11 12 15) [ 0.486937] ACPI: Enabled 1 GPEs in block 00 to 1F [ 0.492036] vgaarb: loaded [ 0.494984] SCSI subsystem initialized [ 0.499127] ACPI: bus type USB registered [ 0.503271] usbcore: registered new interface driver usbfs [ 0.508823] usbcore: registered new interface driver hub [ 0.514218] usbcore: registered new device driver usb [ 0.519562] pps_core: LinuxPPS API ver. 1 registered [ 0.524533] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.533710] PTP clock support registered [ 0.537940] PCI: Using ACPI for IRQ routing [ 0.543320] pci 0000:00:16.0: no compatible bridge window for [mem 0xfd000000-0xfd0003ff] [ 0.551982] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.556975] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.564844] Switched to clocksource hpet [ 0.568939] pnp: PnP ACPI init [ 0.572026] ACPI: bus type PNP registered [ 0.576590] system 00:01: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.583564] system 00:01: [mem 0x7f800000-0x7fffffff] could not be reserved [ 0.590683] system 00:02: [io 0x0680-0x069f] has been reserved [ 0.596622] system 00:02: [io 0x0400-0x047f] could not be reserved [ 0.602899] system 00:02: [io 0x0500-0x05fe] has been reserved [ 0.608844] system 00:02: [mem 0xfed00000-0xfedfffff] could not be reserved [ 0.615819] system 00:02: [mem 0x000c0000-0x000dffff] has been reserved [ 0.622447] system 00:02: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.629421] system 00:02: [mem 0xffa00000-0xffffffff] has been reserved [ 0.636041] system 00:02: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.643093] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 0.649024] system 00:04: [io 0x0a10-0x0a1f] has been reserved [ 0.656275] pnp: PnP ACPI: found 7 devices [ 0.660390] ACPI: bus type PNP unregistered [ 0.674681] pci 0000:00:16.0: BAR 0: assigned [mem 0x80000000-0x800003ff] [ 0.681489] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.686472] pci 0000:00:01.0: bridge window [mem 0xdfd00000-0xdfdfffff] [ 0.693278] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.698264] pci 0000:00:03.0: PCI bridge to [bus 03] [ 0.703253] pci 0000:00:04.0: PCI bridge to [bus 04] [ 0.708321] NET: Registered protocol family 2 [ 0.713051] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.720393] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.727195] TCP: Hash tables configured (established 32768 bind 32768) [ 0.733787] TCP: reno registered [ 0.737037] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.743089] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.749663] NET: Registered protocol family 1 [ 0.754168] RPC: Registered named UNIX socket transport module. [ 0.760104] RPC: Registered udp transport module. [ 0.764821] RPC: Registered tcp transport module. [ 0.769532] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.787117] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.793583] software IO TLB [mem 0x7a96d000-0x7e96d000] (64MB) mapped at [ffff88007a96d000-ffff88007e96cfff] [ 0.803757] microcode: CPU0 sig=0x406d8, pf=0x1, revision=0x125 [ 0.809699] microcode: CPU1 sig=0x406d8, pf=0x1, revision=0x125 [ 0.815705] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.824677] SSE version of gcm_enc/dec engaged. [ 0.830302] futex hash table entries: 51Login incorrect vc-edge login: 2 (order: 3, 32768 bytes) [ Password: 0.849874] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.856321] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.866350] msgmni has been set to 7867 [ 0.870498] io scheduler noop registered [ 0.874439] io scheduler deadline registered (default) [ 0.879697] pcu_gpio 0000:00:1f.0: gbase is 0x503 [ 0.884576] pcu_gpio 0000:00:1f.0: abase is 0x403 [ 0.889301] pcu_gpio 0000:00:1f.0: pbase is 0xfed03002 [ 0.895714] pcieport 0000:00:04.0: can't derive routing for PCI INT A [ 0.902168] pcieport 0000:00:04.0: PCI INT A: no GSI [ 0.907645] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 0.914618] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.921185] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 0.928181] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt [ 0.935174] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt [ 0.942355] ipmi message handler version 39.2 [ 0.946729] ipmi device interface [ 0.950204] IPMI System Interface driver. [ 0.954395] ipmi_si: Adding default-specified kcs state machine [ 0.960352] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 0.970360] ipmi_si: Interface detection failed [ 0.979793] ipmi_si: Adding default-specified smic state machine [ 0.985844] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 [ 0.995936] ipmi_si: Interface detection failed [ 1.004787] ipmi_si: Adding default-specified bt state machine [ 1.010660] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 [ 1.020493] ipmi_si: Interface detection failed [ 1.030041] ipmi_si: Unable to find any System Interface(s) [ 1.035628] IPMI Watchdog: driver initialized [ 1.039996] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 1.048494] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled ¦[ 1.075693] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.103891] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.112006] Non-volatile memory driver v1.3 [ 1.116207] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 1.125171] Hangcheck: Using getrawmonotonic(). [ 1.140768] ahci 0000:00:18.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.148874] ahci 0000:00:18.0: flags: 64bit ncq led clo pio sxs deso sadm sds apst [ 1.157579] scsi0 : ahci [ 1.160448] scsi1 : ahci [ 1.163206] ata1: SATA max UDMA/133 abar m2048@0xdff35000 port 0xdff35100 irq 44 [ 1.170613] ata2: SATA max UDMA/133 abar m2048@0xdff35000 port 0xdff35180 irq 44 [ 1.179178] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.185722] ehci-pci: EHCI PCI platform driver [ 1.190338] ehci-pci 0000:00:16.0: EHCI Host Controller [ 1.195590] ehci-pci 0000:00:16.0: new USB bus registered, assigned bus number 1 [ 1.203015] ehci-pci 0000:00:16.0: debug port 2 [ 1.211502] ehci-pci 0000:00:16.0: irq 23, io mem 0x80000000 [ 1.222735] ehci-pci 0000:00:16.0: USB 2.0 started, EHCI 1.00 [ 1.228984] hub 1-0:1.0: USB hub found [ 1.232770] hub 1-0:1.0: 8 ports detected [ 1.237226] ehci-platform: EHCI generic platform driver [ 1.242575] uhci_hcd: USB Universal Host Controller Interface driver [ 1.249268] usbcore: registered new interface driver usb-storage [ 1.255506] usbcore: registered new interface driver usbserial [ 1.261452] usbcore: registered new interface driver usbserial_generic [ 1.268104] usbserial: USB Serial support registered for generic [ 1.274564] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.492683] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) link down (SStatus 0 SControl 300)correct [ 1.504324] ata2.00: ATA-8: 8GB NANDrive, D A421F2, max UDMA/133 [ 1.510348] ata2.00: 15649200 sectors, multi 0: LBA48 [ 1.515960] ata2.00: configured for UDMA/133 [ 1.520404] scsi 1:0:0:0: Direct-Access ATA 8GB NANDrive D A4 PQ: 0 ANSI: 5 [ 1.529053] sd 1:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 1.536812] sd 1:0:0:0: [sda] Write Protect is off [ 1.541642] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.548226] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.552477] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.565959] mousedev: PS/2 mouse device common for all mice [ 1.581397] rtc_cmos 00:03: RTC can wake from S4 [ 1.581403] sda: sda1 sda2 < sda5 sda6 sda7 > sda3 [ 1.592545] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.593162] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.595747] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.595795] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.596432] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 1.596468] iTCO_wdt: Found a Atom C2000 SoC TCO device (Version=3, TCOBASE=0x0460) [ 1.596670] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1) [ 1.596727] iTCO_vendor_support: vendor-support=0 [ 1.596793] sdhci: Secure Digital Host Controller Interface driver [ 1.596794] sdhci: Copyright(c) Pierre Ossman [ 1.597046] hidraw: raw HID events driver (C) Jiri Kosina [ 1.597873] usbcore: registered new interface driver usbhid [ 1.597874] usbhid: USB HID core driver [ 1.597876] vc: board overwrite '' [ 1.597877] vc: found edge500 [ 1.597990] vc: found w83627dhg sio (id=0xa025) [ 1.598025] vc: hwm @a00 [ 1.598231] vc: gpio3x 0xfd [ 1.599922] i2c-gpio i2c-gpio.2: using pins 13 (SDA) and 14 (SCL) [ 1.691669] hub 1-1:1.0: USB hub found [ 1.695606] hub 1-1:1.0: 4 ports detected [ 1.699905] leds 2-0020: i2c index 0 [ 1.709789] leds 2-0024: i2c index 1 [ 1.719511] leds 2-0064: i2c index 2 [ 1.723312] AMD IOMMUv2 driver by Joerg Roedel [ 1.729775] AMD IOMMUv2 functionality not available on this system [ 1.736032] gre: GRE over IPv4 demultiplexor driver [ 1.740938] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.746844] NET: Registered protocol family 10 [ 1.751649] NET: Registered protocol family 17 [ 1.756144] Bridge firewalling registered [ 1.760190] 8021q: 802.1Q VLAN Support v1.8 [ 1.765298] registered taskstats version 1 [ 1.769906] rtc_cmos 00:03: setting system clock to 2019-03-31 01:19:09 UTC (1553995149) [ 1.779409] EXT4-fs (sda7): INFO: recovery required on readonly filesystem [ 1.786584] EXT4-fs (sda7): write access will be enabled during recovery [ 1.804596] tsc: Refined TSC clocksource calibration: 1749.999 MHz [ 1.837483] EXT4-fs (sda7): recovery complete [ 1.843670] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 1.851616] VFS: Mounted root (ext4 filesystem) readonly on device 8:7. [ 1.858849] Freeing unused kernel memory: 764K (ffffffff816d6000 - ffffffff81795000) procd: Console is alive procd: - watchdog - [ 2.207417] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k [ 2.214700] igb: Copyright (c) 2007-2013 Intel Corporation. [ 2.220784] igb 0000:00:14.0: found custom link: 0x6535 [ 2.264767] igb 0000:00:14.0: added PHC on eth0 [ 2.269490] igb 0000:00:14.0: Intel(R) Gigabit Ethernet Network Connection [ 2.276719] igb 0000:00:14.0: eth0: PBA No: 002100-000 [ 2.282061] igb 0000:00:14.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) [ 2.290222] igb 0000:00:14.1: found custom link: 0x6535 [ 2.334309] libphy: mdio-dsa: probed [ 2.338137] Distributed Switch Architecture driver version 0.1 [ 2.344164] eth1[0]: detected a vc-edge login: Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level [ 2.81048Password: ounting /dev/ro[ 5.637637] EXT4-fs (sda7): re-mounted. Opts: (null) ot procd: - early - procd: - watchdog - [ 5.720373] random: nonblocking pool is initialized Failed to connect to ubus procd: - ubus - procd: - init - [ 6.232324] Fixing /dev/root to point to /dev/sda7 () [ 6.245218] vcearlyinit: TSC measured at 1749.999 MHz (none) login: [ 6.324246] Loading modules backported from Linux version master-2014-11-04-0-gf3660a2 [ 6.332505] Backport generated by backports.git backports-20141023-2-g4ff890b [ 6.345117] cfg80211: Calling CRDA to update world regulatory domain [ 6.351762] cfg80211: World regulatory domain updated: [ 6.356988] cfg80211: DFS Master region: unset [ 6.361438] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 6.371350] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 6.379491] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 6.387583] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 6.395675] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 6.403788] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 6.413610] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 6.422038] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 6.430288] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 6.578659] cfg80211: Calling CRDA for country: US [ 6.583772] cfg80211: Regulatory domain changed to country: US [ 6.589766] cfg80211: DFS Master region: FCC [ 6.594069] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 6.603986] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A) [ 6.612347] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A) [ 6.612435] ieee80211 phy0: Atheros AR9300 Rev:4 mem=0xffffc90004340000, irq=16 [ 6.629816] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s) [ 6.639688] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) [ 6.647883] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 7.643582] vcearlyinit: Re-generated network configuration from policy [ 7.719467] EXT4-fs (sda1): recovery complete [ 7.724023] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: [ 7.795408] EXT4-fs (sda3): recovery complete [ 7.803932] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: [ 7.944513] loop: module loaded [ 7.953918] tun: Universal TUN/TAP device driver, 1.6 [ 7.959083] tun: (C) 1999-2004 Max Krasnyansky [ 7.981785] ipip: IPv4 over IPv4 tunneling driver [ 7.998255] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.19.1-k [ 8.006229] ixgbe: Copyright (c) 1999-2013 Intel Corporation. [ 8.022032] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 8.029669] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 8.037300] Netfilter messages via NETLINK v0.30. [ 8.042788] ip_set: protocol 6 [ 8.051831] w83627ehf: Found W83627DHG chip at 0xa00 [ 8.168399] u32 classifier [ 8.171219] input device check on [ 8.174941] Actions configured [ 8.206504] Mirror/redirect action on [ 8.430462] netem: version 1.3 [ 8.535601] usbcore: registered new interface driver ark3116 [ 8.542936] usbserial: USB Serial support registered for ark3116 [ 8.549668] arp_tables: (C) 2002 David S. Miller [ 8.555528] usbcore: registered new interface driver belkin_sa [ 8.561723] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter [ 8.573110] usbcore: registered new interface driver cdc_Login incorrect vc-edge login: wdm [ Password: 8.585087] usbserial: USB Serial support registered for ch341-uart [ 8.592565] usbcore: registered new interface driver cp210x [ 8.598354] usbserial: USB Serial support registered for cp210x [ 8.605921] usbcore: registered new interface driver cypress_m8 [ 8.612063] usbserial: USB Serial support registered for DeLorme Earthmate USB [ 8.619495] usbserial: USB Serial support registered for HID->COM RS232 Adapter [ 8.627034] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter [ 8.635825] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 8.642983] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 8.650838] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 8.656771] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 8.663764] usbcore: registered new interface driver ftdi_sio [ 8.669804] usbserial: USB Serial support registered for FTDI USB Serial Device [ 8.679762] usbcore: registered new interface driver keyspan [ 8.685699] usbserial: USB Serial support registered for Keyspan - (without firmware) [ 8.693800] usbserial: USB Serial support registered for Keyspan 1 port adapter [ 8.701427] usbserial: USB Serial support registered for Keyspan 2 port adapter [ 8.708992] usbserial: USB Serial support registered for Keyspan 4 port adapter [ 8.716995] lib80211: common routines for IEEE802.11 drivers [ 8.724403] usbcore: registered new interface driver mct_u232 [ 8.730435] usbserial: USB Serial support registered for MCT U232 [ 8.737222] usbcore: registered new interface driver mos7720 [ 8.743167] usbserial: USB Serial support registered for Moschip 2 port adapter [ 8.760963] ctnetlink v0.93: registering with nfnetlink. [ 8.785124] usbcore: registered new interface driver oti6858 [ 8.791026] usbserial: USB Serial support registered for oti6858 [ 8.797826] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 8.805372] usbcore: registered new interface driver pl2303 [ 8.811236] usbserial: USB Serial support registered for pl2303 [ 8.817801] usbcore: registered new interface driver sierra [ 8.823664] usbserial: USB Serial support registered for Sierra USB modem [ 8.831583] usbcore: registered new interface driver ti_usb_3410_5052 [ 8.838335] usbserial: USB Serial support registered for TI USB 3410 1 port adapter [ 8.846283] usbserial: USB Serial support registered for TI USB 5052 2 port adapter [ 8.857627] usbcore: registered new interface driver visor [ 8.863319] usbserial: USB Serial support registered for Handspring Visor / Palm OS [ 8.871244] usbserial: USB Serial support registered for Sony Clie 5.0 [ 8.878022] usbserial: USB Serial support registered for Sony Clie 3.5 [ 8.923771] xt_time: kernel timezone is -0000 [ 8.929595] usbcore: registered new interface driver asix [ 8.935888] usbcore: registered new interface driver cdc_ether [ 8.942835] usbcore: registered new interface driver ipw [ 8.948533] usbserial: USB Serial support registered for IPWireless converter [ 8.960323] usbcore: registered new interface driver option [ 8.966106] usbserial: USB Serial support registered for GSM modem (1-port) [ 8.974276] PPP generic driver version 2.4.2 [ 8.979362] NET: Registered protocol family 24 [ 8.984480] usbcore: registered new interface driver qcserial [ 8.990693] usbserial: USB Serial support registered for Qualcomm USB modem [ 8.998544] usbcore: registered new interface driver qmi_wwan [ 9.005316] usbcore: registered new interface driver rndis_host [ 9.012081] usbcore: registered new interface driver sierra_net [ 10.459579] Setting eth2 to autoneg on [ 10.480574] igb 0000:00:14.2: Unsupported Duplex Mode [ 10.486465] Setting eth0 to autoneg on [ 10.501115] igb 0000:00:14.0: Unsupported Duplex Mode [ 10.786489] IPv6: ADDRCONF(NETDEV_UP): lo: link is not ready [ 10.793087] IPv6: ADDRCONF(NETDEV_UP): eth2: Login incorrect vc-edge login: link is not ready [ 1Password: 10.806646] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 10.818550] IPv6: ADDRCONF(NETDEV_UP): sw3: link is not ready [ 10.827556] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 10.860704] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 10.866704] 8021q: adding VLAN 0 to HW filter on device eth1 [ 10.872521] igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 10.880069] IPv6: ADDRCONF(NETDEV_UP): sw3: link is not ready [ 10.890482] device sw3 entered promiscuous mode [ 10.895099] device eth1 entered promiscuous mode [ 10.901884] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 10.911142] IPv6: ADDRCONF(NETDEV_UP): br-network0: link is not ready [ 10.919752] IPv6: ADDRCONF(NETDEV_UP): sw2: link is not ready [ 10.928725] IPv6: ADDRCONF(NETDEV_UP): sw2: link is not ready [ 10.940119] device sw2 entered promiscuous mode [ 10.946968] IPv6: ADDRCONF(NETDEV_UP): sw1: link is not ready [ 10.954258] IPv6: ADDRCONF(NETDEV_UP): sw1: link is not ready [ 10.966741] device sw1 entered promiscuous mode [ 10.976586] IPv6: ADDRCONF(NETDEV_UP): sw0: link is not ready [ 10.985418] IPv6: ADDRCONF(NETDEV_UP): sw0: link is not ready [ 11.012514] device sw0 entered promiscuous mode [ 11.047593] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 11.053602] 8021q: adding VLAN 0 to HW filter on device eth2 [ 11.090964] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.096932] 8021q: adding VLAN 0 to HW filter on device eth0 [ 11.133654] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 11.139631] 8021q: adding VLAN 0 to HW filter on device eth3 [ 11.422266] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 11.428726] device wlan0 entered promiscuous mode [ 11.433660] br-network0: port 5(wlan0) entered forwarding state [ 11.439715] br-network0: port 5(wlan0) entered forwarding state [ 11.445835] IPv6: ADDRCONF(NETDEV_CHANGE): br-network0: link becomes ready [ 11.530089] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready procd: - init complete - [ 13.440701] br-network0: port 5(wlan0) entered forwarding state Login incorrect vc-edge login: