msgbuf.txt0600004644713462114511  7566 ustarrootwheelCopyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p6 #3 518496b29ae(RELENG_2_4_4): Wed Dec 12 07:41:44 EST 2018
    root@buildbot2.nyi.netgate.com:/build/ce-crossbuild-244/obj/amd64/ZfGpH5cd/build/ce-crossbuild-244/pfSense/tmp/FreeBSD-src/sys/pfSense amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU           E5430  @ 2.66GHz (2660.08-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x10676  Family=0x6  Model=0x17  Stepping=6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  VT-x: (disabled in BIOS) HLT,PAUSE
  TSC: P-state invariant, performance statistics
real memory  = 15032385536 (14336 MB)
avail memory = 14486274048 (13815 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <DELL   PE_SC3  >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s)
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #6 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #5 Launched!
Timecounter "TSC-low" frequency 1330041916 Hz quality 1000
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80680430, 0) error 1
random: entropy device external interface
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff806804e0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80680590, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff806a7460, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff806a7510, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff806a75c0, 0) error 1
wlan: mac acl policy registered
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff81209800, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <DELL PE_SC3> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci3
pci4: <PCI bus> on pcib4
bce0: <QLogic NetXtreme II BCM5708 1000Base-T (B2)> mem 0xd6000000-0xd7ffffff irq 16 at device 0.0 on pci4
miibus0: <MII bus> on bce0
brgphy0: <BCM5708C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce0: Using defaults for TSO: 65518/35/2048
bce0: Ethernet address: 00:22:19:15:b0:38
bce0: 
<5>bce0: link state changed to DOWN
ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (4.4.1); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (ipms 1.6.0)
Coal (RX:6,6,18,18; TX:20,20,80,80)
pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci2
pcib5: failed to allocate initial I/O port window: 0xe000-0xefff
pci5: <ACPI PCI bus> on pcib5
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> mem 0xd5ee0000-0xd5efffff,0xd5e80000-0xd5ebffff,0xd5edc000-0xd5edffff irq 17 at device 0.0 on pci5
ix0: Using MSI-X interrupts with 9 vectors
ix0: Ethernet address: 00:1b:21:3c:87:f3
ix0: PCI Express Bus: Speed 2.5GT/s Width x4
ix0: PCI-Express bandwidth available for this card
     is not sufficient for optimal performance.
ix0: For optimal performance a x8 PCIE, or x4 PCIE Gen2 slot is required.
ix0: netmap queues/slots: TX 8/2048, RX 8/2048
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> mem 0xd5e60000-0xd5e7ffff,0xd5e00000-0xd5e3ffff,0xd5ed8000-0xd5edbfff irq 18 at device 0.1 on pci5
ix1: Using MSI-X interrupts with 9 vectors
ix1: Ethernet address: 00:1b:21:3c:87:f2
ix1: PCI Express Bus: Speed 2.5GT/s Width x4
ix1: PCI-Express bandwidth available for this card
     is not sufficient for optimal performance.
ix1: For optimal performance a x8 PCIE, or x4 PCIE Gen2 slot is required.
ix1: netmap queues/slots: TX 8/2048, RX 8/2048
pcib6: <PCI-PCI bridge> at device 0.3 on pci1
pci6: <PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <PCI-PCI bridge> at device 0.0 on pci8
pci9: <PCI bus> on pcib9
pcib10: <PCI-PCI bridge> at device 2.0 on pci9
pcib10: failed to allocate initial I/O port window: 0xd000-0xdfff
pci10: <PCI bus> on pcib10
igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem 0xdf0e0000-0xdf0fffff,0xdee00000-0xdeffffff,0xdf0dc000-0xdf0dffff irq 18 at device 0.0 on pci10
igb0: Using MSIX interrupts with 5 vectors
igb0: Ethernet address: 00:1b:21:3c:2a:28
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
igb0: netmap queues/slots: TX 4/1024, RX 4/1024
igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem 0xdf0a0000-0xdf0bffff,0xdec00000-0xdedfffff,0xdf0d8000-0xdf0dbfff irq 19 at device 0.1 on pci10
igb1: Using MSIX interrupts with 5 vectors
igb1: Ethernet address: 00:1b:21:3c:2a:29
igb1: Bound queue 0 to cpu 4
igb1: Bound queue 1 to cpu 5
igb1: Bound queue 2 to cpu 6
igb1: Bound queue 3 to cpu 7
igb1: netmap queues/slots: TX 4/1024, RX 4/1024
pcib11: <PCI-PCI bridge> at device 4.0 on pci9
pcib11: failed to allocate initial I/O port window: 0xc000-0xcfff
pci11: <PCI bus> on pcib11
igb2: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem 0xdeae0000-0xdeafffff,0xde800000-0xde9fffff,0xdeadc000-0xdeadffff irq 16 at device 0.0 on pci11
igb2: Using MSIX interrupts with 5 vectors
igb2: Ethernet address: 00:1b:21:3c:2a:2c
igb2: Bound queue 0 to cpu 0
igb2: Bound queue 1 to cpu 1
igb2: Bound queue 2 to cpu 2
igb2: Bound queue 3 to cpu 3
igb2: netmap queues/slots: TX 4/1024, RX 4/1024
igb3: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem 0xdeaa0000-0xdeabffff,0xde600000-0xde7fffff,0xdead8000-0xdeadbfff irq 17 at device 0.1 on pci11
igb3: Using MSIX interrupts with 5 vectors
igb3: Ethernet address: 00:1b:21:3c:2a:2d
igb3: Bound queue 0 to cpu 4
igb3: Bound queue 1 to cpu 5
igb3: Bound queue 2 to cpu 6
igb3: Bound queue 3 to cpu 7
igb3: netmap queues/slots: TX 4/1024, RX 4/1024
pcib12: <PCI-PCI bridge> at device 5.0 on pci0
pci12: <PCI bus> on pcib12
pcib13: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci13: <ACPI PCI bus> on pcib13
pcib14: <PCI-PCI bridge> at device 7.0 on pci0
pci14: <PCI bus> on pcib14
pcib15: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci15: <ACPI PCI bus> on pcib15
pcib16: <PCI-PCI bridge> at device 0.0 on pci15
pci16: <PCI bus> on pcib16
bce1: <QLogic NetXtreme II BCM5708 1000Base-T (B2)> mem 0xda000000-0xdbffffff irq 16 at device 0.0 on pci16
miibus1: <MII bus> on bce1
brgphy1: <BCM5708C 1000BASE-T media interface> PHY 1 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce1: Using defaults for TSO: 65518/35/2048
bce1: Ethernet address: 00:22:19:15:b0:36
bce1: 
<5>bce1: link state changed to DOWN
ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (4.4.1); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (ipms 1.6.0)
Coal (RX:6,6,18,18; TX:20,20,80,80)
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0xace0-0xacff irq 21 at device 29.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0xacc0-0xacdf irq 20 at device 29.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0xaca0-0xacbf irq 21 at device 29.2 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0xac80-0xac9f irq 20 at device 29.3 on pci0
usbus3 on uhci3
usbus3: 12Mbps Full Speed USB v1.0
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xdf300400-0xdf3007ff irq 21 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
usbus4: 480Mbps High Speed USB v2.0
pcib17: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci17: <ACPI PCI bus> on pcib17
vgapci0: <VGA-compatible display> port 0xbc00-0xbcff mem 0xf0000000-0xf7ffffff,0xde1d0000-0xde1dffff irq 19 at device 13.0 on pci17
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 SATA300 controller> port 0xac78-0xac7f,0xac70-0xac73,0xac60-0xac67,0xac58-0xac5b,0xac40-0xac4f mem 0xdf300000-0xdf3003ff irq 23 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xec000-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: No FDOUT register!
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 81d081d0600081d
device_attach: est0 attach returned 6
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 81d081d0600081d
device_attach: est1 attach returned 6
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 81d081d0600081d
device_attach: est2 attach returned 6
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 81d081d0600081d
device_attach: est3 attach returned 6
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 81d081d0600081d
device_attach: est4 attach returned 6
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 81d081d0600081d
device_attach: est5 attach returned 6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 81d081d0600081d
device_attach: est6 attach returned 6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 81d081d0600081d
device_attach: est7 attach returned 6
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen4.1: <Intel EHCI root HUB> at usbus4
ugen1.1: <Intel UHCI root HUB> at usbus1
ugen2.1: <Intel UHCI root HUB> at usbus2
ugen3.1: <Intel UHCI root HUB> at usbus3
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub0: 8 ports with 8 removable, self powered
ugen4.2: <vendor 0x04b4 product 0x6560> at usbus4
uhub5 on uhub0
uhub5: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 2> on usbus4
uhub5: MTT enabled
ugen1.2: <ALCOR Generic USB Hub> at usbus1
uhub6 on uhub3
uhub6: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus1
uhub5: 4 ports with 4 removable, self powered
uhub6: 4 ports with 4 removable, self powered
ugen1.3: <Logitech USB Receiver> at usbus1
ukbd0 on uhub6
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 3> on usbus1
kbd2 at ukbd0
uhid0 on uhub6
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 3> on usbus1
ugen1.4: <No brand 4 Port KVMSwicther> at usbus1
ukbd1 on uhub6
ukbd1: <Keyboard> on usbus1
kbd3 at ukbd1
uhid1 on uhub6
uhid1: <Mouse> on usbus1
device_attach: uhid1 attach returned 12
ada0 at ata3 bus 0 scbus1 target 0 lun 0
ada0: <SAMSUNG HM251HI 2AJ10001> ATA8-ACS SATA 2.x device
ada0: Serial Number S237JDQZ511961
ada0: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes)
ada0: 238475MB (488397168 512 byte sectors)
Trying to mount root from zfs:zroot/ROOT/default []...
random: unblocking device.
<118>Configuring crash dumps...
<118>Using /dev/ada0p2 for dump device.
<118>Filesystems are clean, continuing...
<118>Mounting filesystems...
<118>
<118>        __
<118> _ __  / _|___  ___ _ __  ___  ___
<118>| '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \
<118>| |_) |  _\__ \  __/ | | \__ \  __/
<118>| .__/|_| |___/\___|_| |_|___/\___|
<118>|_|
<118>
<118>
<118>Welcome to pfSense 2.4.4-RELEASE (Patch 2)...
<118>
<118>No core dumps found.
<118>...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/ipsec /usr/local/lib/perl5/5.26/mach/CORE
<118>32-bit compatibility ldconfig path:
<118>done.
<118>>>> Removing vital flag from lang/php72... done.
<118>External config loader 1.0 is now starting...
<118>Launching the init system...Updating CPU Microcode...
CPU: Intel(R) Xeon(R) CPU           E5430  @ 2.66GHz (2660.08-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x10676  Family=0x6  Model=0x17  Stepping=6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  VT-x: (disabled in BIOS) HLT,PAUSE
  TSC: P-state invariant, performance statistics
<118>Done.
<118>...... done.
<118>Initializing.................. done.
<118>Starting device manager (devd)...kldload: can't load ums: No such file or directory
<118>done.
<118>Loading configuration......done.
<118>Updating configuration...done.
<118>Checking config backups consistency..........................done.
<118>Setting up extended sysctls...done.
<118>Setting timezone...done.
<118>Configuring loopback interface...done.
<118>Starting syslog...done.
<118>Starting Secure Shell Services...done.
<118>Setting up interfaces microcode...done.
<118>Configuring loopback interface...done.
<118>Creating wireless clone interfaces...done.
<118>Configuring LAGG interfaces...done.
<118>Configuring VLAN interfaces...done.
<118>Configuring QinQ interfaces...done.
<118>Configuring IPsec VTI interfaces...done.
<118>Configuring WAN interface...done.
<118>Configuring LAN interface...done.
<118>Configuring CARP settings...done.
<118>Syncing OpenVPN settings...done.
<118>Configuring firewall
<6>pflog0: promiscuous mode enabled
<118>......done.
<118>Starting PFLOG...done.
<118>Setting up gateway monitors...done.
<118>Setting up static routes...done.
<118>Setting up DNSs...
<118>Starting DNS Resolver...
<7>arpresolve: can't allocate llinfo for 192.168.1.1 on bce0
bce0: Gigabit link up!
<5>bce0: link state changed to UP
bce1: Gigabit link up!
<5>bce1: link state changed to UP
<118>done.
<118>Synchronizing user settings...done.
<118>Starting webConfigurator...done.
<118>Configuring CRON...done.
<118>Starting NTP time client...done.
<118>Starting DHCP service...done.
<118>Starting DHCPv6 service...done.
<118>Configuring firewall......done.
<118>Generating RRD graphs...done.
<118>Starting syslog...done.
<118>Starting CRON... done.
<118>pfSense 2.4.4-RELEASE (Patch 2) amd64 Wed Dec 12 07:40:18 EST 2018
<118>Bootup complete
ugen1.2: <ALCOR Generic USB Hub> at usbus1 (disconnected)
uhub6: at uhub3, port 1, addr 2 (disconnected)
ugen1.3: <Logitech USB Receiver> at usbus1 (disconnected)
ukbd0: at uhub6, port 2, addr 3 (disconnected)
ukbd0: detached
uhid0: at uhub6, port 2, addr 3 (disconnected)
uhid0: detached
ugen1.4: <No brand 4 Port KVMSwicther> at usbus1 (disconnected)
ukbd1: at uhub6, port 3, addr 4 (disconnected)
ukbd1: detached
uhub6: detached


Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address	= 0x0
fault code		= supervisor read instruction, page not present
instruction pointer	= 0x20:0x0
stack pointer	        = 0x28:0xfffffe03db8d4af8
frame pointer	        = 0x28:0xfffffe03db8d4b20
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 0 (ix1 linkq)
version.txt06000033613462114511  7613 ustarrootwheelFreeBSD 11.2-RELEASE-p6 #3 518496b29ae(RELENG_2_4_4): Wed Dec 12 07:41:44 EST 2018
    root@buildbot2.nyi.netgate.com:/build/ce-crossbuild-244/obj/amd64/ZfGpH5cd/build/ce-crossbuild-244/pfSense/tmp/FreeBSD-src/sys/pfSense

Filename: /var/crash/textdump.tar.1
ddb.txt06000014000013462114726  7100 ustarrootwheeldb:0:kdb.enter.default>  run lockinfo
db:1:lockinfo> show locks
No such command; use "help" to list available commands
db:1:lockinfo>  show alllocks
No such command; use "help" to list available commands
db:1:lockinfo>  show lockedvnods
Locked vnodes
db:0:kdb.enter.default>  show pcpu
cpuid        = 0
dynamic pcpu = 0xbe6480
curthread    = 0xfffff80009492000: pid 0 "ix1 linkq"
curpcb       = 0xfffffe03db8d4cc0
fpcurthread  = none
idlethread   = 0xfffff80005f86000: tid 100003 "idle: cpu0"
curpmap      = 0xffffffff82b83898
tssp         = 0xffffffff82bb4710
commontssp   = 0xffffffff82bb4710
rsp0         = 0xfffffe03db8d4cc0
gs32p        = 0xffffffff82bbaf68
ldt          = 0xffffffff82bbafa8
tss          = 0xffffffff82bbaf98
db:0:kdb.enter.default>  bt
Tracing pid 0 tid 100118 td 0xfffff80009492000
??() at 0
ixgbe_handle_mod() at ixgbe_handle_mod+0x7b/frame 0xfffffe03db8d4b20
taskqueue_run_locked() at taskqueue_run_locked+0x154/frame 0xfffffe03db8d4b80
taskqueue_thread_loop() at taskqueue_thread_loop+0x98/frame 0xfffffe03db8d4bb0
fork_exit() at fork_exit+0x83/frame 0xfffffe03db8d4bf0
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe03db8d4bf0
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
db:0:kdb.enter.default>  ps