dmesg
em0: promiscuous mode enabled
em1: promiscuous mode enabled
em1.10: promiscuous mode enabled
igb1: promiscuous mode enabled
igb3: promiscuous mode enabled
igb3.56: promiscuous mode enabled
em1.11: promiscuous mode enabled
em2: promiscuous mode disabled
em0: promiscuous mode disabled
em1.10: promiscuous mode disabled
igb1: promiscuous mode disabled
igb3: promiscuous mode disabled
igb3.56: promiscuous mode disabled
em1: promiscuous mode disabled
em1.11: promiscuous mode disabled
em0: promiscuous mode enabled
em1: promiscuous mode enabled
em1.11: promiscuous mode enabled
igb3: promiscuous mode enabled
igb3.56: promiscuous mode enabled
igb1: promiscuous mode enabled
em1.10: promiscuous mode enabled
em2: promiscuous mode enabled
em2: promiscuous mode disabled
em0: promiscuous mode disabled
em1.10: promiscuous mode disabled
igb1: promiscuous mode disabled
igb3: promiscuous mode disabled
igb3.56: promiscuous mode disabled
em1: promiscuous mode disabled
em1.11: promiscuous mode disabled
ugen0.3: <Kingston DataTraveler 3.0> at usbus0
umass0 on uhub2
umass0: <Kingston DataTraveler 3.0, class 0/0, rev 3.10/0.01, addr 2> on usbus0
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Kingston DataTraveler 3.0 > Removable Direct Access SPC-4 SCSI device
da0: Serial Number 60A44C3FAFD5F261997B4107
da0: 400.000MB/s transfers
da0: 14755MB (30218842 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
pflog0: promiscuous mode disabled
ovpnc1: link state changed to DOWN
ovpnc4: link state changed to DOWN
ovpnc3: link state changed to DOWN
ovpns5: link state changed to DOWN
ovpnc2: link state changed to DOWN
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 3 1 0 0 done
All buffers synced.
Uptime: 1d19h9m47s
ukbd0: detached
uhid0: detached
umass0: detached
uhub4: detached
uhub3: detached
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p10 #9 4a2bfdce133(RELENG_2_4_4): Wed May 15 18:54:42 EDT 2019
    root@buildbot1-nyi.netgate.com:/build/ce-crossbuild-244/obj/amd64/ZfGpH5cd/build/ce-crossbuild-244/pfSense/tmp/FreeBSD-src/sys/pfSense amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz (3192.67-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
  Structured Extended Features3=0x9c000000<IBPB,STIBP,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8158654464 (7780 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   CBX3   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 1596336926 Hz quality 1000
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80681430, 0) error 1
random: entropy device external interface
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff806814e0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80681590, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff806a8460, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff806a8510, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff806a85c0, 0) error 1
wlan: mac acl policy registered
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff8120aaa0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <DELL CBX3   > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xe020-0xe03f mem 0xf7d60000-0xf7d7ffff,0xf7d40000-0xf7d5ffff irq 16 at device 0.0 on pci1
em0: Using an MSI interrupt
em0: Ethernet address: 00:00:00:00:00:01
em0: netmap queues/slots: TX 1/1024, RX 1/1024
em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xe000-0xe01f mem 0xf7d20000-0xf7d3ffff,0xf7d00000-0xf7d1ffff irq 17 at device 0.1 on pci1
em1: Using an MSI interrupt
em1: Ethernet address: 00:00:00:00:00:02
em1: netmap queues/slots: TX 1/1024, RX 1/1024
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7400000-0xf77fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7e20000-0xf7e2ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
uart2: <Intel Lynx Point KT Controller> port 0xf0e0-0xf0e7 mem 0xf7e3a000-0xf7e3afff irq 19 at device 22.3 on pci0
em2: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xf080-0xf09f mem 0xf7e00000-0xf7e1ffff,0xf7e39000-0xf7e39fff irq 20 at device 25.0 on pci0
em2: Using an MSI interrupt
em2: Ethernet address: 00:00:00:00:00:03
em2: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7e38000-0xf7e383ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
hdac0: <Intel Lynx Point HDA Controller> mem 0xf7e30000-0xf7e33fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci5: <ACPI PCI bus> on pcib5
igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem 0xf7b80000-0xf7bfffff,0xf7c0c000-0xf7c0ffff irq 16 at device 0.0 on pci5
igb0: Using MSIX interrupts with 5 vectors
igb0: Ethernet address: 00:00:00:00:00:04
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
igb0: netmap queues/slots: TX 4/1024, RX 4/1024
igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem 0xf7a80000-0xf7afffff,0xf7c08000-0xf7c0bfff irq 17 at device 0.1 on pci5
igb1: Using MSIX interrupts with 5 vectors
igb1: Ethernet address: 00:00:00:00:00:05
igb1: Bound queue 0 to cpu 0
igb1: Bound queue 1 to cpu 1
igb1: Bound queue 2 to cpu 2
igb1: Bound queue 3 to cpu 3
igb1: netmap queues/slots: TX 4/1024, RX 4/1024
igb2: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem 0xf7980000-0xf79fffff,0xf7c04000-0xf7c07fff irq 18 at device 0.2 on pci5
igb2: Using MSIX interrupts with 5 vectors
igb2: Ethernet address: 00:00:00:00:00:06
igb2: Bound queue 0 to cpu 0
igb2: Bound queue 1 to cpu 1
igb2: Bound queue 2 to cpu 2
igb2: Bound queue 3 to cpu 3
igb2: netmap queues/slots: TX 4/1024, RX 4/1024
igb3: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem 0xf7880000-0xf78fffff,0xf7c00000-0xf7c03fff irq 19 at device 0.3 on pci5
igb3: Using MSIX interrupts with 5 vectors
igb3: Ethernet address: 00:00:00:00:00:07
igb3: Bound queue 0 to cpu 0
igb3: Bound queue 1 to cpu 1
igb3: Bound queue 2 to cpu 2
igb3: Bound queue 3 to cpu 3
igb3: netmap queues/slots: TX 4/1024, RX 4/1024
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7e37000-0xf7e373ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH8+ (RAID) AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7e36000-0xf7e367ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xd9000-0xd9fff,0xda000-0xdafff,0xdb000-0xdbfff,0xdc000-0xdcfff,0xdd000-0xddfff,0xde000-0xdefff,0xdf000-0xdffff,0xe0000-0xe0fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC280 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC280 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC280 (Analog 2.0+HP/2.0)> at nid 20,21 and 26 on hdaa0
pcm1: <Realtek ALC280 (Rear Analog)> at nid 27 and 24 on hdaa0
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub0: 21 ports with 21 removable, self powered
uhub1: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
ugen0.2: <Logitech USB Receiver> at usbus0
ukbd0 on uhub0
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/24.07, addr 1> on usbus0
kbd2 at ukbd0
uhid0 on uhub0
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/24.07, addr 1> on usbus0
ugen1.2: <vendor 0x8087 product 0x8008> at usbus1
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1
ugen2.2: <vendor 0x8087 product 0x8000> at usbus2
uhub4 on uhub2
uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ses0 at ahciem0 bus 0 scbus1 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST1000DM003-1ER162 CC45> ACS-2 ATA SATA 3.x device
ada0: Serial Number W4Y4QR0Z
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada0: quirks=0x1<4K>
Trying to mount root from ufs:/dev/ufsid/5ce9b9a072dfb9e3 [rw]...
random: unblocking device.
CPU: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz (3192.67-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
  Structured Extended Features3=0x9c000400<IBPB,STIBP,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
padlock0: No ACE support.
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
vlan0: changing name to 'igb3.53'
vlan1: changing name to 'igb3.55'
vlan2: changing name to 'igb3.56'
vlan3: changing name to 'igb3.57'
vlan4: changing name to 'igb0.11'
vlan5: changing name to 'igb0.10'
vlan6: changing name to 'igb2.30'
vlan7: changing name to 'igb3.51'
vlan8: changing name to 'em1.10'
vlan9: changing name to 'em1.11'
em1: link state changed to UP
em1.10: link state changed to UP
em1.11: link state changed to UP
igb3: link state changed to UP
igb3.51: link state changed to UP
igb3.55: link state changed to UP
igb3.53: link state changed to UP
igb3.57: link state changed to UP
igb3.56: link state changed to UP
em2: link state changed to UP
tun5: changing name to 'ovpns5'
tun1: changing name to 'ovpnc1'
ovpns5: link state changed to UP
tun2: changing name to 'ovpnc2'
tun3: changing name to 'ovpnc3'
tun4: changing name to 'ovpnc4'
pflog0: promiscuous mode enabled
em0: link state changed to UP
igb1: link state changed to UP
ovpnc1: link state changed to UP
ovpnc4: link state changed to UP
ovpnc2: link state changed to UP
ovpnc3: link state changed to UP
em0: link state changed to DOWN
vlan6: changing name to 'em0.30'
em0: link state changed to UP
em0.30: link state changed to UP
em0: link state changed to DOWN
em0.30: link state changed to DOWN
igb2: link state changed to UP
vlan6: changing name to 'em0.51'
vlan7: changing name to 'em0.53'
vlan10: changing name to 'igb3.51'
igb3: link state changed to DOWN
igb3.51: link state changed to DOWN
igb3.55: link state changed to DOWN
igb3.53: link state changed to DOWN
igb3.57: link state changed to DOWN
igb3.56: link state changed to DOWN
igb3: link state changed to UP
igb3.51: link state changed to UP
igb3.55: link state changed to UP
igb3.53: link state changed to UP
igb3.57: link state changed to UP
igb3.56: link state changed to UP
em0: link state changed to UP
em0.53: link state changed to UP
igb3: link state changed to DOWN
igb3.51: link state changed to DOWN
igb3.55: link state changed to DOWN
igb3.53: link state changed to DOWN
igb3.57: link state changed to DOWN
igb3.56: link state changed to DOWN
igb3: link state changed to UP
igb3.51: link state changed to UP
igb3.55: link state changed to UP
igb3.53: link state changed to UP
igb3.57: link state changed to UP
igb3.56: link state changed to UP
igb3: link state changed to DOWN
igb3.51: link state changed to DOWN
igb3.55: link state changed to DOWN
igb3.53: link state changed to DOWN
igb3.57: link state changed to DOWN
igb3.56: link state changed to DOWN
igb3: link state changed to UP
igb3.51: link state changed to UP
igb3.55: link state changed to UP
igb3.53: link state changed to UP
igb3.57: link state changed to UP
igb3.56: link state changed to UP
em0: link state changed to DOWN
em0.53: link state changed to DOWN
igb3: link state changed to DOWN
igb3.51: link state changed to DOWN
igb3.55: link state changed to DOWN
igb3.53: link state changed to DOWN
igb3.57: link state changed to DOWN
igb3.56: link state changed to DOWN
em0: link state changed to UP
em0.53: link state changed to UP
igb3: link state changed to UP
igb3.51: link state changed to UP
igb3.55: link state changed to UP
igb3.53: link state changed to UP
igb3.57: link state changed to UP
igb3.56: link state changed to UP
igb3: link state changed to DOWN
igb3.51: link state changed to DOWN
igb3.55: link state changed to DOWN
igb3.53: link state changed to DOWN
igb3.57: link state changed to DOWN
igb3.56: link state changed to DOWN
igb3: link state changed to UP
igb3.51: link state changed to UP
igb3.55: link state changed to UP
igb3.53: link state changed to UP
igb3.57: link state changed to UP
igb3.56: link state changed to UP
igb3: link state changed to DOWN
igb3.51: link state changed to DOWN
igb3.55: link state changed to DOWN
igb3.53: link state changed to DOWN
igb3.57: link state changed to DOWN
igb3.56: link state changed to DOWN
igb3: link state changed to UP
igb3.51: link state changed to UP
igb3.55: link state changed to UP
igb3.53: link state changed to UP
igb3.57: link state changed to UP
igb3.56: link state changed to UP
igb3: link state changed to DOWN
igb3.51: link state changed to DOWN
igb3.55: link state changed to DOWN
igb3.53: link state changed to DOWN
igb3.57: link state changed to DOWN
igb3.56: link state changed to DOWN
igb3: link state changed to UP
igb3.51: link state changed to UP
igb3.55: link state changed to UP
igb3.53: link state changed to UP
igb3.57: link state changed to UP
igb3.56: link state changed to UP
em0: link state changed to DOWN
em0.53: link state changed to DOWN
igb3: link state changed to DOWN
igb3.51: link state changed to DOWN
igb3.55: link state changed to DOWN
igb3.53: link state changed to DOWN
igb3.57: link state changed to DOWN
igb3.56: link state changed to DOWN
em0: link state changed to UP
em0.53: link state changed to UP
igb3: link state changed to UP
igb3.51: link state changed to UP
igb3.55: link state changed to UP
igb3.53: link state changed to UP
igb3.57: link state changed to UP
igb3.56: link state changed to UP
em0: link state changed to DOWN
em0.53: link state changed to DOWN
igb3: link state changed to DOWN
igb3.51: link state changed to DOWN
igb3.55: link state changed to DOWN
igb3.53: link state changed to DOWN
igb3.57: link state changed to DOWN
igb3.56: link state changed to DOWN
em0: link state changed to UP
em0.53: link state changed to UP
igb3: link state changed to UP
igb3.51: link state changed to UP
igb3.55: link state changed to UP
igb3.53: link state changed to UP
igb3.57: link state changed to UP
igb3.56: link state changed to UP
vlan6: changing name to 'em0.51'
em0: link state changed to DOWN
em0.51: link state changed to DOWN
em0.53: link state changed to DOWN
em0: link state changed to UP
em0.51: link state changed to UP
em0.53: link state changed to UP
igb2: link state changed to DOWN
igb2: link state changed to UP
igb3: link state changed to DOWN
igb3.51: link state changed to DOWN
igb3.55: link state changed to DOWN
igb3.53: link state changed to DOWN
igb3.57: link state changed to DOWN
igb3.56: link state changed to DOWN
igb3: link state changed to UP
igb3.51: link state changed to UP
igb3.55: link state changed to UP
igb3.53: link state changed to UP
igb3.57: link state changed to UP
igb3.56: link state changed to UP
em0: link state changed to DOWN
em0.51: link state changed to DOWN
em0.53: link state changed to DOWN
em0: link state changed to UP
em0.51: link state changed to UP
em0.53: link state changed to UP
igb3: link state changed to DOWN
igb3.51: link state changed to DOWN
igb3.55: link state changed to DOWN
igb3.53: link state changed to DOWN
igb3.57: link state changed to DOWN
igb3.56: link state changed to DOWN
igb3: link state changed to UP
igb3.51: link state changed to UP
igb3.55: link state changed to UP
igb3.53: link state changed to UP
igb3.57: link state changed to UP
igb3.56: link state changed to UP
igb3: link state changed to DOWN
igb3.51: link state changed to DOWN
igb3.55: link state changed to DOWN
igb3.53: link state changed to DOWN
igb3.57: link state changed to DOWN
igb3.56: link state changed to DOWN
igb3: link state changed to UP
igb3.51: link state changed to UP
igb3.55: link state changed to UP
igb3.53: link state changed to UP
igb3.57: link state changed to UP
igb3.56: link state changed to UP
vlan0: changing name to 'igb3.53'
vlan1: changing name to 'igb3.55'
vlan2: changing name to 'igb3.56'
vlan3: changing name to 'igb3.57'
vlan4: changing name to 'igb0.11'
vlan5: changing name to 'igb0.10'
em1: link state changed to DOWN
em1.11: link state changed to DOWN
vlan8: changing name to 'em1.10'
em1: link state changed to UP
em1.10: link state changed to UP
em1.11: link state changed to UP
em1: link state changed to DOWN
em1.10: link state changed to DOWN
vlan9: changing name to 'em1.11'
em1: link state changed to UP
em1.10: link state changed to UP
em1.11: link state changed to UP
em0: link state changed to DOWN
em0.51: link state changed to DOWN
vlan7: changing name to 'em0.53'
em0: link state changed to UP
em0.51: link state changed to UP
em0.53: link state changed to UP
vlan10: changing name to 'igb3.51'
em0: link state changed to DOWN
em0.53: link state changed to DOWN
vlan6: changing name to 'em0.51'
em0: link state changed to UP
em0.51: link state changed to UP
em0.53: link state changed to UP
igb0: link state changed to UP
igb0.10: link state changed to UP
igb0.11: link state changed to UP
arp: 00:44:52:00:00:82 is using my IP address 10.0.99.1 on igb0!
arp: 00:44:52:00:00:82 is using my IP address 10.0.99.1 on igb0!
igb0: link state changed to DOWN
igb0.10: link state changed to DOWN
igb0.11: link state changed to DOWN
ovpnc4: link state changed to DOWN
ovpnc4: link state changed to UP
ovpnc1: link state changed to DOWN
ovpnc1: link state changed to UP
tun8: changing name to 'ovpnc8'
ovpnc3: link state changed to DOWN
ovpnc2: link state changed to DOWN
ovpnc8: link state changed to UP
ovpnc8: link state changed to DOWN
ovpnc8: link state changed to UP
ovpnc4: link state changed to DOWN
ovpnc8: link state changed to DOWN
pflog0: promiscuous mode disabled
ovpnc1: link state changed to DOWN
ovpns5: link state changed to DOWN
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 5 1 0 0 done
All buffers synced.
Uptime: 5d4h44m37s
ukbd0: detached
uhid0: detached
uhub3: detached
uhub4: detached
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p10 #9 4a2bfdce133(RELENG_2_4_4): Wed May 15 18:54:42 EDT 2019
    root@buildbot1-nyi.netgate.com:/build/ce-crossbuild-244/obj/amd64/ZfGpH5cd/build/ce-crossbuild-244/pfSense/tmp/FreeBSD-src/sys/pfSense amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz (3192.68-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
  Structured Extended Features3=0x9c000000<IBPB,STIBP,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8158654464 (7780 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   CBX3   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 1596340036 Hz quality 1000
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80681430, 0) error 1
random: entropy device external interface
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff806814e0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80681590, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff806a8460, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff806a8510, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff806a85c0, 0) error 1
wlan: mac acl policy registered
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff8120aaa0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <DELL CBX3   > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xe020-0xe03f mem 0xf7d60000-0xf7d7ffff,0xf7d40000-0xf7d5ffff irq 16 at device 0.0 on pci1
em0: Using an MSI interrupt
em0: Ethernet address: 00:00:00:00:00:01
em0: netmap queues/slots: TX 1/1024, RX 1/1024
em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xe000-0xe01f mem 0xf7d20000-0xf7d3ffff,0xf7d00000-0xf7d1ffff irq 17 at device 0.1 on pci1
em1: Using an MSI interrupt
em1: Ethernet address: 00:00:00:00:00:02
em1: netmap queues/slots: TX 1/1024, RX 1/1024
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7400000-0xf77fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7e20000-0xf7e2ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
uart2: <Intel Lynx Point KT Controller> port 0xf0e0-0xf0e7 mem 0xf7e3a000-0xf7e3afff irq 19 at device 22.3 on pci0
em2: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xf080-0xf09f mem 0xf7e00000-0xf7e1ffff,0xf7e39000-0xf7e39fff irq 20 at device 25.0 on pci0
em2: Using an MSI interrupt
em2: Ethernet address: 00:00:00:00:00:03
em2: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7e38000-0xf7e383ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
hdac0: <Intel Lynx Point HDA Controller> mem 0xf7e30000-0xf7e33fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci5: <ACPI PCI bus> on pcib5
igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem 0xf7b80000-0xf7bfffff,0xf7c0c000-0xf7c0ffff irq 16 at device 0.0 on pci5
igb0: Using MSIX interrupts with 5 vectors
igb0: Ethernet address: 00:00:00:00:00:04
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
igb0: netmap queues/slots: TX 4/1024, RX 4/1024
igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem 0xf7a80000-0xf7afffff,0xf7c08000-0xf7c0bfff irq 17 at device 0.1 on pci5
igb1: Using MSIX interrupts with 5 vectors
igb1: Ethernet address: 00:00:00:00:00:05
igb1: Bound queue 0 to cpu 0
igb1: Bound queue 1 to cpu 1
igb1: Bound queue 2 to cpu 2
igb1: Bound queue 3 to cpu 3
igb1: netmap queues/slots: TX 4/1024, RX 4/1024
igb2: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem 0xf7980000-0xf79fffff,0xf7c04000-0xf7c07fff irq 18 at device 0.2 on pci5
igb2: Using MSIX interrupts with 5 vectors
igb2: Ethernet address: 00:00:00:00:00:06
igb2: Bound queue 0 to cpu 0
igb2: Bound queue 1 to cpu 1
igb2: Bound queue 2 to cpu 2
igb2: Bound queue 3 to cpu 3
igb2: netmap queues/slots: TX 4/1024, RX 4/1024
igb3: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem 0xf7880000-0xf78fffff,0xf7c00000-0xf7c03fff irq 19 at device 0.3 on pci5
igb3: Using MSIX interrupts with 5 vectors
igb3: Ethernet address: 00:00:00:00:00:07
igb3: Bound queue 0 to cpu 0
igb3: Bound queue 1 to cpu 1
igb3: Bound queue 2 to cpu 2
igb3: Bound queue 3 to cpu 3
igb3: netmap queues/slots: TX 4/1024, RX 4/1024
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7e37000-0xf7e373ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH8+ (RAID) AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7e36000-0xf7e367ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xd9000-0xd9fff,0xda000-0xdafff,0xdb000-0xdbfff,0xdc000-0xdcfff,0xdd000-0xddfff,0xde000-0xdefff,0xdf000-0xdffff,0xe0000-0xe0fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC280 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC280 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC280 (Analog 2.0+HP/2.0)> at nid 20,21 and 26 on hdaa0
pcm1: <Realtek ALC280 (Rear Analog)> at nid 27 and 24 on hdaa0
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen2.1: <Intel EHCI root HUB> at usbus2
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 21 ports with 21 removable, self powered
uhub1: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
ugen0.2: <Logitech USB Receiver> at usbus0
ukbd0 on uhub0
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/24.07, addr 1> on usbus0
kbd2 at ukbd0
uhid0 on uhub0
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/24.07, addr 1> on usbus0
ugen1.2: <vendor 0x8087 product 0x8008> at usbus1
uhub3 on uhub2
uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1
ugen2.2: <vendor 0x8087 product 0x8000> at usbus2
uhub4 on uhub1
uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ses0 at ahciem0 bus 0 scbus1 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST1000DM003-1ER162 CC45> ACS-2 ATA SATA 3.x device
ada0: Serial Number W4Y4QR0Z
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada0: quirks=0x1<4K>
Trying to mount root from ufs:/dev/ufsid/5ce9b9a072dfb9e3 [rw]...
random: unblocking device.
CPU: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz (3192.68-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
  Structured Extended Features3=0x9c000400<IBPB,STIBP,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
padlock0: No ACE support.
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
vlan0: changing name to 'igb3.53'
vlan1: changing name to 'igb3.55'
vlan2: changing name to 'igb3.56'
vlan3: changing name to 'igb3.57'
vlan4: changing name to 'igb0.11'
vlan5: changing name to 'igb0.10'
vlan6: changing name to 'em1.10'
vlan7: changing name to 'em1.11'
vlan8: changing name to 'em0.53'
vlan9: changing name to 'igb3.51'
vlan10: changing name to 'em0.51'
em1: link state changed to UP
em1.10: link state changed to UP
em1.11: link state changed to UP
igb3: link state changed to UP
igb3.51: link state changed to UP
igb3.55: link state changed to UP
igb3.53: link state changed to UP
igb3.57: link state changed to UP
igb3.56: link state changed to UP
em0: link state changed to UP
em0.51: link state changed to UP
em0.53: link state changed to UP
em2: link state changed to UP
tun5: changing name to 'ovpns5'
tun1: changing name to 'ovpnc1'
ovpns5: link state changed to UP
tun2: changing name to 'ovpnc2'
tun3: changing name to 'ovpnc3'
tun4: changing name to 'ovpnc4'
tun8: changing name to 'ovpnc8'
pflog0: promiscuous mode enabled
igb1: link state changed to UP
igb2: link state changed to UP
ovpnc1: link state changed to UP
ovpnc8: link state changed to UP
ovpnc4: link state changed to UP
ovpnc2: link state changed to UP
ovpnc3: link state changed to UP
ovpnc2: link state changed to DOWN
ovpnc3: link state changed to DOWN
ovpnc2: link state changed to UP
ovpnc3: link state changed to UP
ovpnc8: link state changed to DOWN
ovpnc1: link state changed to DOWN
ovpnc4: link state changed to DOWN
ovpnc8: link state changed to UP
ovpnc4: link state changed to UP
ovpnc1: link state changed to UP
ovpnc2: link state changed to DOWN
ovpnc3: link state changed to DOWN
ovpnc1: link state changed to DOWN
ovpnc4: link state changed to DOWN
ovpnc8: link state changed to DOWN
em2: link state changed to DOWN
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
em2: link state changed to UP
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
em2: link state changed to DOWN
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
em2: link state changed to UP
arpresolve: can't allocate llinfo for 39.129.30.1 on em2
ovpns5: link state changed to DOWN
ovpns5: link state changed to UP
ovpns5: link state changed to DOWN
ovpns5: link state changed to UP
em2: link state changed to DOWN
arpresolve: can't allocate llinfo for 192.168.100.1 on em2
arpresolve: can't allocate llinfo for 192.168.100.1 on em2
arpresolve: can't allocate llinfo for 192.168.100.1 on em2
em2: link state changed to UP
arpresolve: can't allocate llinfo for 192.168.100.1 on em2
em2: link state changed to DOWN
arpresolve: can't allocate llinfo for 192.168.100.1 on em2
em2: link state changed to UP
arpresolve: can't allocate llinfo for 192.168.100.1 on em2
arpresolve: can't allocate llinfo for 192.168.100.1 on em2
ovpns5: link state changed to DOWN
ovpns5: link state changed to UP
ovpns5: link state changed to DOWN
ovpns5: link state changed to UP
ugen0.2: <Logitech USB Receiver> at usbus0 (disconnected)
ukbd0: at uhub0, port 4, addr 1 (disconnected)
ukbd0: detached
uhid0: at uhub0, port 4, addr 1 (disconnected)
uhid0: detached
pflog0: promiscuous mode disabled
ovpns5: link state changed to DOWN
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 3 0 0 done
All buffers synced.
Uptime: 6d23h59m29s
uhub3: detached
uhub4: detached
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p10 #9 4a2bfdce133(RELENG_2_4_4): Wed May 15 18:54:42 EDT 2019
    root@buildbot1-nyi.netgate.com:/build/ce-crossbuild-244/obj/amd64/ZfGpH5cd/build/ce-crossbuild-244/pfSense/tmp/FreeBSD-src/sys/pfSense amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz (3192.67-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
  Structured Extended Features3=0x9c000000<IBPB,STIBP,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8158654464 (7780 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   CBX3   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1596336445 Hz quality 1000
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80681430, 0) error 1
random: entropy device external interface
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff806814e0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80681590, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff806a8460, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff806a8510, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff806a85c0, 0) error 1
wlan: mac acl policy registered
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff8120aaa0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <DELL CBX3   > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xe020-0xe03f mem 0xf7d60000-0xf7d7ffff,0xf7d40000-0xf7d5ffff irq 16 at device 0.0 on pci1
em0: Using an MSI interrupt
em0: Ethernet address: 00:00:00:00:00:01
em0: netmap queues/slots: TX 1/1024, RX 1/1024
em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xe000-0xe01f mem 0xf7d20000-0xf7d3ffff,0xf7d00000-0xf7d1ffff irq 17 at device 0.1 on pci1
em1: Using an MSI interrupt
em1: Ethernet address: 00:00:00:00:00:02
em1: netmap queues/slots: TX 1/1024, RX 1/1024
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7400000-0xf77fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7e20000-0xf7e2ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
uart2: <Intel Lynx Point KT Controller> port 0xf0e0-0xf0e7 mem 0xf7e3a000-0xf7e3afff irq 19 at device 22.3 on pci0
em2: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xf080-0xf09f mem 0xf7e00000-0xf7e1ffff,0xf7e39000-0xf7e39fff irq 20 at device 25.0 on pci0
em2: Using an MSI interrupt
em2: Ethernet address: 00:00:00:00:00:03
em2: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7e38000-0xf7e383ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
hdac0: <Intel Lynx Point HDA Controller> mem 0xf7e30000-0xf7e33fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci5: <ACPI PCI bus> on pcib5
igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem 0xf7b80000-0xf7bfffff,0xf7c0c000-0xf7c0ffff irq 16 at device 0.0 on pci5
igb0: Using MSIX interrupts with 5 vectors
igb0: Ethernet address: 00:00:00:00:00:04
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
igb0: netmap queues/slots: TX 4/1024, RX 4/1024
igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem 0xf7a80000-0xf7afffff,0xf7c08000-0xf7c0bfff irq 17 at device 0.1 on pci5
igb1: Using MSIX interrupts with 5 vectors
igb1: Ethernet address: 00:00:00:00:00:05
igb1: Bound queue 0 to cpu 0
igb1: Bound queue 1 to cpu 1
igb1: Bound queue 2 to cpu 2
igb1: Bound queue 3 to cpu 3
igb1: netmap queues/slots: TX 4/1024, RX 4/1024
igb2: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem 0xf7980000-0xf79fffff,0xf7c04000-0xf7c07fff irq 18 at device 0.2 on pci5
igb2: Using MSIX interrupts with 5 vectors
igb2: Ethernet address: 00:00:00:00:00:06
igb2: Bound queue 0 to cpu 0
igb2: Bound queue 1 to cpu 1
igb2: Bound queue 2 to cpu 2
igb2: Bound queue 3 to cpu 3
igb2: netmap queues/slots: TX 4/1024, RX 4/1024
igb3: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem 0xf7880000-0xf78fffff,0xf7c00000-0xf7c03fff irq 19 at device 0.3 on pci5
igb3: Using MSIX interrupts with 5 vectors
igb3: Ethernet address: 00:00:00:00:00:07
igb3: Bound queue 0 to cpu 0
igb3: Bound queue 1 to cpu 1
igb3: Bound queue 2 to cpu 2
igb3: Bound queue 3 to cpu 3
igb3: netmap queues/slots: TX 4/1024, RX 4/1024
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7e37000-0xf7e373ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH8+ (RAID) AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7e36000-0xf7e367ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xd9000-0xd9fff,0xda000-0xdafff,0xdb000-0xdbfff,0xdc000-0xdcfff,0xdd000-0xddfff,0xde000-0xdefff,0xdf000-0xdffff,0xe0000-0xe0fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC280 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC280 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC280 (Analog 2.0+HP/2.0)> at nid 20,21 and 26 on hdaa0
pcm1: <Realtek ALC280 (Rear Analog)> at nid 27 and 24 on hdaa0
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1: 21 ports with 21 removable, self powered
uhub0: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
ugen2.2: <vendor 0x8087 product 0x8000> at usbus2
uhub3 on uhub0
uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2
ugen1.2: <vendor 0x8087 product 0x8008> at usbus1
uhub4 on uhub2
uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1
uhub4: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ses0 at ahciem0 bus 0 scbus1 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST1000DM003-1ER162 CC45> ACS-2 ATA SATA 3.x device
ada0: Serial Number W4Y4QR0Z
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada0: quirks=0x1<4K>
Trying to mount root from ufs:/dev/ufsid/5ce9b9a072dfb9e3 [rw]...
random: unblocking device.
CPU: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz (3192.67-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
  Structured Extended Features3=0x9c000400<IBPB,STIBP,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
padlock0: No ACE support.
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
vlan0: changing name to 'igb3.53'
vlan1: changing name to 'igb3.55'
vlan2: changing name to 'igb3.56'
vlan3: changing name to 'igb3.57'
vlan4: changing name to 'igb0.11'
vlan5: changing name to 'igb0.10'
vlan6: changing name to 'em1.10'
vlan7: changing name to 'em1.11'
vlan8: changing name to 'em0.53'
vlan9: changing name to 'igb3.51'
vlan10: changing name to 'em0.51'
em1: link state changed to UP
em1.10: link state changed to UP
em1.11: link state changed to UP
igb3: link state changed to UP
igb3.51: link state changed to UP
igb3.55: link state changed to UP
igb3.53: link state changed to UP
igb3.57: link state changed to UP
igb3.56: link state changed to UP
em0: link state changed to UP
em0.51: link state changed to UP
em0.53: link state changed to UP
em2: link state changed to UP
tun5: changing name to 'ovpns5'
tun1: changing name to 'ovpnc1'
ovpns5: link state changed to UP
tun2: changing name to 'ovpnc2'
tun3: changing name to 'ovpnc3'
tun4: changing name to 'ovpnc4'
tun8: changing name to 'ovpnc8'
pflog0: promiscuous mode enabled
igb2: link state changed to UP
igb1: link state changed to UP
ovpnc8: link state changed to UP
ovpnc1: link state changed to UP
ovpnc2: link state changed to UP
ovpnc3: link state changed to UP
ovpnc4: link state changed to UP
ovpnc1: link state changed to DOWN
ovpnc2: link state changed to DOWN
ovpnc3: link state changed to DOWN
ovpnc4: link state changed to DOWN
ovpnc8: link state changed to DOWN
ovpns5: link state changed to DOWN
pflog0: promiscuous mode disabled
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 4 4 1 0 done
All buffers synced.
Uptime: 5d20h18m23s
uhub4: detached
uhub3: detached
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p10 #9 4a2bfdce133(RELENG_2_4_4): Wed May 15 18:54:42 EDT 2019
    root@buildbot1-nyi.netgate.com:/build/ce-crossbuild-244/obj/amd64/ZfGpH5cd/build/ce-crossbuild-244/pfSense/tmp/FreeBSD-src/sys/pfSense amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz (3192.67-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
  Structured Extended Features3=0x9c000000<IBPB,STIBP,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8158654464 (7780 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   CBX3   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 1596336881 Hz quality 1000
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80681430, 0) error 1
random: entropy device external interface
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff806814e0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80681590, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff806a8460, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff806a8510, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff806a85c0, 0) error 1
wlan: mac acl policy registered
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff8120aaa0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <DELL CBX3   > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xe020-0xe03f mem 0xf7d60000-0xf7d7ffff,0xf7d40000-0xf7d5ffff irq 16 at device 0.0 on pci1
em0: Using an MSI interrupt
em0: Ethernet address: 00:00:00:00:00:01
em0: netmap queues/slots: TX 1/1024, RX 1/1024
em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xe000-0xe01f mem 0xf7d20000-0xf7d3ffff,0xf7d00000-0xf7d1ffff irq 17 at device 0.1 on pci1
em1: Using an MSI interrupt
em1: Ethernet address: 00:00:00:00:00:02
em1: netmap queues/slots: TX 1/1024, RX 1/1024
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7400000-0xf77fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7e20000-0xf7e2ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
uart2: <Intel Lynx Point KT Controller> port 0xf0e0-0xf0e7 mem 0xf7e3a000-0xf7e3afff irq 19 at device 22.3 on pci0
em2: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xf080-0xf09f mem 0xf7e00000-0xf7e1ffff,0xf7e39000-0xf7e39fff irq 20 at device 25.0 on pci0
em2: Using an MSI interrupt
em2: Ethernet address: 00:00:00:00:00:03
em2: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7e38000-0xf7e383ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
hdac0: <Intel Lynx Point HDA Controller> mem 0xf7e30000-0xf7e33fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci5: <ACPI PCI bus> on pcib5
igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem 0xf7b80000-0xf7bfffff,0xf7c0c000-0xf7c0ffff irq 16 at device 0.0 on pci5
igb0: Using MSIX interrupts with 5 vectors
igb0: Ethernet address: 00:00:00:00:00:04
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
igb0: netmap queues/slots: TX 4/1024, RX 4/1024
igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem 0xf7a80000-0xf7afffff,0xf7c08000-0xf7c0bfff irq 17 at device 0.1 on pci5
igb1: Using MSIX interrupts with 5 vectors
igb1: Ethernet address: 00:00:00:00:00:05
igb1: Bound queue 0 to cpu 0
igb1: Bound queue 1 to cpu 1
igb1: Bound queue 2 to cpu 2
igb1: Bound queue 3 to cpu 3
igb1: netmap queues/slots: TX 4/1024, RX 4/1024
igb2: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem 0xf7980000-0xf79fffff,0xf7c04000-0xf7c07fff irq 18 at device 0.2 on pci5
igb2: Using MSIX interrupts with 5 vectors
igb2: Ethernet address: 00:00:00:00:00:06
igb2: Bound queue 0 to cpu 0
igb2: Bound queue 1 to cpu 1
igb2: Bound queue 2 to cpu 2
igb2: Bound queue 3 to cpu 3
igb2: netmap queues/slots: TX 4/1024, RX 4/1024
igb3: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem 0xf7880000-0xf78fffff,0xf7c00000-0xf7c03fff irq 19 at device 0.3 on pci5
igb3: Using MSIX interrupts with 5 vectors
igb3: Ethernet address: 00:00:00:00:00:07
igb3: Bound queue 0 to cpu 0
igb3: Bound queue 1 to cpu 1
igb3: Bound queue 2 to cpu 2
igb3: Bound queue 3 to cpu 3
igb3: netmap queues/slots: TX 4/1024, RX 4/1024
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7e37000-0xf7e373ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH8+ (RAID) AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7e36000-0xf7e367ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xd9000-0xd9fff,0xda000-0xdafff,0xdb000-0xdbfff,0xdc000-0xdcfff,0xdd000-0xddfff,0xde000-0xdefff,0xdf000-0xdffff,0xe0000-0xe0fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC280 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC280 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC280 (Analog 2.0+HP/2.0)> at nid 20,21 and 26 on hdaa0
pcm1: <Realtek ALC280 (Rear Analog)> at nid 27 and 24 on hdaa0
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub2: 21 ports with 21 removable, self powered
uhub1: 3 ports with 3 removable, self powered
uhub0: 3 ports with 3 removable, self powered
ugen1.2: <vendor 0x8087 product 0x8008> at usbus1
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1
ugen2.2: <vendor 0x8087 product 0x8000> at usbus2
uhub4 on uhub0
uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ses0 at ahciem0 bus 0 scbus1 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST1000DM003-1ER162 CC45> ACS-2 ATA SATA 3.x device
ada0: Serial Number W4Y4QR0Z
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada0: quirks=0x1<4K>
Trying to mount root from ufs:/dev/ufsid/5ce9b9a072dfb9e3 [rw]...
random: unblocking device.
CPU: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz (3192.67-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
  Structured Extended Features3=0x9c000400<IBPB,STIBP,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
padlock0: No ACE support.
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
vlan0: changing name to 'igb3.53'
vlan1: changing name to 'igb3.55'
vlan2: changing name to 'igb3.56'
vlan3: changing name to 'igb3.57'
vlan4: changing name to 'igb0.11'
vlan5: changing name to 'igb0.10'
vlan6: changing name to 'em1.10'
vlan7: changing name to 'em1.11'
vlan8: changing name to 'em0.53'
vlan9: changing name to 'igb3.51'
vlan10: changing name to 'em0.51'
em1: link state changed to UP
em1.10: link state changed to UP
em1.11: link state changed to UP
igb3: link state changed to UP
igb3.51: link state changed to UP
igb3.55: link state changed to UP
igb3.53: link state changed to UP
igb3.57: link state changed to UP
igb3.56: link state changed to UP
em0: link state changed to UP
em0.51: link state changed to UP
em0.53: link state changed to UP
em2: link state changed to UP
tun5: changing name to 'ovpns5'
ovpns5: link state changed to UP
pflog0: promiscuous mode enabled
igb1: link state changed to UP
igb2: link state changed to UP
ovpns5: link state changed to DOWN
ovpns5: link state changed to UP
ovpns5: link state changed to DOWN
ovpns5: link state changed to UP
ugen0.2: <Logitech USB Receiver> at usbus0
ukbd0 on uhub2
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/24.07, addr 1> on usbus0
kbd2 at ukbd0
uhid0 on uhub2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/24.07, addr 1> on usbus0
ugen0.2: <Logitech USB Receiver> at usbus0 (disconnected)
ukbd0: at uhub2, port 11, addr 1 (disconnected)
ukbd0: detached
uhid0: at uhub2, port 11, addr 1 (disconnected)
uhid0: detached
ugen0.2: <Logitech USB Receiver> at usbus0
ukbd0 on uhub2
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/24.07, addr 2> on usbus0
kbd2 at ukbd0
uhid0 on uhub2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/24.07, addr 2> on usbus0
ugen0.2: <Logitech USB Receiver> at usbus0 (disconnected)
ukbd0: at uhub2, port 4, addr 2 (disconnected)
ukbd0: detached
uhid0: at uhub2, port 4, addr 2 (disconnected)
uhid0: detached