---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.2-STABLE fd0f54f44b5c(RELENG_2_5_0) pfSense amd64
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz (3292.44-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c000800<SYSCALL,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16508956672 (15744 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   CBX3   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 2 1 3
Timecounter "TSC-low" frequency 1646220996 Hz quality 1000
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8073dd40, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8073ddf0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8073dea0, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff80765730, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff807657e0, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80765890, 0) error 1
wlan: mac acl policy registered
random: entropy device external interface
module_register_init: MOD_LOAD (vesa, 0xffffffff8140c3e0, 0) error 19
kbd1 at kbdmux0
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
[ath_hal] loaded
000.000056 [4336] netmap_init               netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.5.2 (September 2019)
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <DELL CBX3   > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7400000-0xf77fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xf7d34000-0xf7d37fff irq 16 at device 3.0 on pci0
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7d20000-0xf7d2ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci_interrupt: host controller halted
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
uart2: <Intel Lynx Point KT Controller> port 0xf0e0-0xf0e7 mem 0xf7d3e000-0xf7d3efff irq 19 at device 22.3 on pci0
uart2: Using 1 MSI message
em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem 0xf7d00000-0xf7d1ffff,0xf7d3d000-0xf7d3dfff irq 20 at device 25.0 on pci0
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using an MSI interrupt
<6>em0: Ethernet address: 18:66:da:00:ea:9c
<6>em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7d3c000-0xf7d3c3ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
hdac1: <Intel Lynx Point HDA Controller> mem 0xf7d30000-0xf7d33fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib2
igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7b00000-0xf7bfffff,0xf7c8c000-0xf7c8ffff irq 16 at device 0.0 on pci2
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 4 RX queues 4 TX queues
igb0: Using MSI-X interrupts with 5 vectors
<6>igb0: Ethernet address: a0:36:9f:03:d6:1c
<6>igb0: netmap queues/slots: TX 4/1024, RX 4/1024
igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7a00000-0xf7afffff,0xf7c88000-0xf7c8bfff irq 17 at device 0.1 on pci2
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 4 RX queues 4 TX queues
igb1: Using MSI-X interrupts with 5 vectors
<6>igb1: Ethernet address: a0:36:9f:03:d6:1d
<6>igb1: netmap queues/slots: TX 4/1024, RX 4/1024
igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7900000-0xf79fffff,0xf7c84000-0xf7c87fff irq 18 at device 0.2 on pci2
igb2: Using 1024 TX descriptors and 1024 RX descriptors
igb2: Using 4 RX queues 4 TX queues
igb2: Using MSI-X interrupts with 5 vectors
<6>igb2: Ethernet address: a0:36:9f:03:d6:1e
<6>igb2: netmap queues/slots: TX 4/1024, RX 4/1024
igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7800000-0xf78fffff,0xf7c80000-0xf7c83fff irq 19 at device 0.3 on pci2
igb3: Using 1024 TX descriptors and 1024 RX descriptors
igb3: Using 4 RX queues 4 TX queues
igb3: Using MSI-X interrupts with 5 vectors
<6>igb3: Ethernet address: a0:36:9f:03:d6:1f
<6>igb3: netmap queues/slots: TX 4/1024, RX 4/1024
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7d3b000-0xf7d3b3ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7d3a000-0xf7d3a7ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd0fff,0xd1000-0xd1fff,0xd2000-0xd2fff,0xd3000-0xd3fff,0xd4000-0xd4fff,0xd5000-0xd5fff,0xd6000-0xd6fff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f2500002100
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f2500002100
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f2500002100
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f2500002100
device_attach: est3 attach returned 6
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
hdacc1: <Realtek ALC280 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC280 Audio Function Group> at nid 1 on hdacc1
pcm0: <Realtek ALC280 (Analog 2.0+HP/2.0)> at nid 20,21 and 26 on hdaa1
pcm1: <Realtek ALC280 (Rear Analog)> at nid 27 and 24 on hdaa1
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen1.1: <Intel EHCI root HUB> at usbus1
Trying to mount root from zfs:pfSense/ROOT/default []...
Root mount waiting for: usbus0 usbus1 usbus2 CAM
uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
Root mount waiting for: usbus0 usbus1 usbus2 CAM
uhub1: 21 ports with 21 removable, self powered
uhub2: 3 ports with 3 removable, self powered
uhub0: 3 ports with 3 removable, self powered
ugen0.2: <CPS CP1500PFCLCD> at usbus0
Root mount waiting for: usbus0 usbus1 usbus2 CAM
ugen1.2: <vendor 0x8087 product 0x8008> at usbus1
uhub3 on uhub2
uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1
ugen2.2: <vendor 0x8087 product 0x8000> at usbus2
uhub4 on uhub0
uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2
ugen0.3: <vendor 0x0b38 product 0x0010> at usbus0
ukbd0 on uhub1
ukbd0: <vendor 0x0b38 product 0x0010, class 0/0, rev 1.10/1.02, addr 2> on usbus0
kbd2 at ukbd0
uhid0 on uhub1
uhid0: <vendor 0x0b38 product 0x0010, class 0/0, rev 1.10/1.02, addr 2> on usbus0
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST3160813AS CC2H> ATA8-ACS SATA 2.x device
ada0: Serial Number 9SY1SJGP
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 152627MB (312581808 512 byte sectors)
ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
ses0: pass1,cd0 in 'Slot 01', SATA Slot: scbus1 target 0
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <TSSTcorp DVD+-RW SN-208FB D100> Removable CD-ROM SCSI device
cd0: Serial Number S13L6YBGC01CSM
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
<118>Configuring crash dumps...
<118>Using /dev/ada0p3 for dump device.
<118>Filesystems are clean, continuing...
<118>Mounting filesystems...
<118>
<118>        __
<118> _ __  / _|___  ___ _ __  ___  ___
<118>| '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \
<118>| |_) |  _\__ \  __/ | | \__ \  __/
<118>| .__/|_| |___/\___|_| |_|___/\___|
<118>|_|
<118>
<118>
<118>Welcome to pfSense 2.5.2-RELEASE...
<118>
<118>No core dumps found.
<118>...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/ipsec /usr/local/lib/perl5/5.32/mach/CORE
<118>32-bit compatibility ldconfig path:
<118>done.
<118>>>> Removing vital flag from php74... done.
<118>External config loader 1.0 is now starting... ada0p1 ada0p2 ada0p4
<118>Launching the init system...Updating CPU Microcode...
CPU: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz (3292.44-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c000800<SYSCALL,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
  Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
<118>Done.
<118>.... done.
<118>Initializing.................. done.
<118>Starting device manager (devd)...done.
<118>Loading configuration......done.
<118>Updating configuration...done.
<118>Checking config backups consistency.................................done.
<118>Setting up extended sysctls...done.
padlock0: No ACE support.
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f3b00002100
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f3b00002100
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f3b00002100
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f1400002100
device_attach: est3 attach returned 6
<118>Setting timezone...done.
<118>Configuring loopback interface...
<6>lo0: link state changed to UP
<118>done.
<118>Starting syslog...done.
<118>Starting Secure Shell Services...done.
<118>Setting up interfaces microcode...done.
<118>Starting PC/SC Smart Card Services...done.
<118>Configuring loopback interface...done.
<118>Creating wireless clone interfaces...done.
<118>Configuring LAGG interfaces...done.
<118>Configuring VLAN interfaces...
<6>vlan0: changing name to 'igb0.2'
<6>vlan1: changing name to 'igb0.5'
<6>vlan2: changing name to 'igb0.3'
<118>done.
<118>Configuring QinQ interfaces...done.
<118>Configuring WAN interface...
<6>em0: link state changed to UP
<6>em0: link state changed to DOWN
<6>igb0: link state changed to UP
<6>igb0.2: link state changed to UP
<6>igb0.3: link state changed to UP
<6>igb0.5: link state changed to UP
<6>em0: link state changed to UP
<118>done.
<118>Configuring LAN interface...done.
<118>Configuring PUBLIC interface...done.
<118>Configuring SECURITY interface...done.
<118>Configuring IPsec VTI interfaces...done.
<118>Configuring CARP settings...done.
<118>Syncing OpenVPN settings...
<6>tun2: changing name to 'ovpns2'
<6>tun4: changing name to 'ovpns4'
<118>done.
<6>ovpns4: link state changed to UP
<6>ovpns2: link state changed to UP
<6>pflog0: promiscuous mode enabled
<118>Configuring firewall......done.
<118>Starting PFLOG...done.
<118>Setting up gateway monitors...done.
<118>Setting up static routes...done.
<118>Setting up DNSs...
<118>Starting DNS Resolver...done.
<118>Synchronizing user settings...done.
<118>Starting webConfigurator...done.
<118>Configuring CRON...done.
<118>Starting NTP Server...done.
<118>Starting DHCP service...done.
<118>Configuring firewall......done.
<118>Starting captive portal(swtribe)... 
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched FQ_CODEL loaded
load_dn_sched dn_sched FQ_PIE loaded
load_dn_aqm dn_aqm CODEL loaded
load_dn_aqm dn_aqm PIE loaded
IPFW: starting up interface tracker
<118>done
<118>Starting captive portal(SWTribePublic)... done
<118>Generating RRD graphs...done.
<118>Starting syslog...done.
<118>Starting CRON... done.
<118> Starting package arping...done.
<118> Starting package nmap...done.
<118> Starting package squid3...done.
<118> Starting package pfBlockerNG...done.
<118> Starting package Service Watchdog...done.
<118> Starting package OpenVPN Client Export Utility...done.
<118> Starting package Lightsquid...done.
<118> Starting package Cron...done.
<118> Starting package mailreport...done.
<118> Starting package RRD Summary...done.
<118> Starting package nut...done.
<118> Starting package iperf...done.
<118> Starting package Traffic Totals...done.
<118> Starting package arpwatch...done.
<118> Starting package acme...done.
<6>igb0: promiscuous mode enabled
<6>igb0.2: promiscuous mode enabled
<6>igb0.3: promiscuous mode enabled
<6>igb0.5: promiscuous mode enabled
<118> Starting package squidGuard...done.
<118> Starting /usr/local/etc/rc.d/c-icap.sh...done.
<118> Starting /usr/local/etc/rc.d/clamd.sh...done.
<118> Starting /usr/local/etc/rc.d/dnsbl.sh...done.
<118> Starting /usr/local/etc/rc.d/lighttpd_ls.sh...done.
<118> Starting /usr/local/etc/rc.d/shutdown.nut.sh...done.
<118> Starting /usr/local/etc/rc.d/sqp_monitor.sh...done.
<118> Starting /usr/local/etc/rc.d/vnstatd.sh...done.
<118>pfSense 2.5.2-RELEASE amd64 Fri Jul 02 15:33:00 EDT 2021
<118>Bootup complete
<5>arp: packet with unknown hardware format 0x06 received on igb0.5
<6>igb0.3: promiscuous mode disabled
<6>pflog0: promiscuous mode disabled
<6>igb0.5: promiscuous mode disabled
<6>ovpns2: link state changed to DOWN
<6>igb0: promiscuous mode disabled
<6>igb0.2: promiscuous mode disabled
<6>ovpns4: link state changed to DOWN
<118>2021-08-19T14:05:07.075619-06:00 www.swtribe.ca squid 33501 - - Squid Parent: squid-1 process 34049 exited with status 1
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining... 0 0 0 0 0 done
Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done
All buffers synced.
Uptime: 1d18h25m15s
uhub4: detached
uhub3: detached
ukbd0: detached
uhid0: detached
---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.2-STABLE fd0f54f44b5c(RELENG_2_5_0) pfSense amd64
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz (3292.45-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c000800<SYSCALL,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16508956672 (15744 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   CBX3   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 1 2 3
Timecounter "TSC-low" frequency 1646222532 Hz quality 1000
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8073dd40, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8073ddf0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8073dea0, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff80765730, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff807657e0, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80765890, 0) error 1
wlan: mac acl policy registered
random: entropy device external interface
module_register_init: MOD_LOAD (vesa, 0xffffffff8140c3e0, 0) error 19
kbd1 at kbdmux0
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
[ath_hal] loaded
000.000056 [4336] netmap_init               netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.5.2 (September 2019)
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <DELL CBX3   > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7400000-0xf77fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xf7d34000-0xf7d37fff irq 16 at device 3.0 on pci0
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7d20000-0xf7d2ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci_interrupt: host controller halted
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
uart2: <Intel Lynx Point KT Controller> port 0xf0e0-0xf0e7 mem 0xf7d3e000-0xf7d3efff irq 19 at device 22.3 on pci0
uart2: Using 1 MSI message
em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem 0xf7d00000-0xf7d1ffff,0xf7d3d000-0xf7d3dfff irq 20 at device 25.0 on pci0
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using an MSI interrupt
<6>em0: Ethernet address: 18:66:da:00:ea:9c
<6>em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7d3c000-0xf7d3c3ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
hdac1: <Intel Lynx Point HDA Controller> mem 0xf7d30000-0xf7d33fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib2
igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7b00000-0xf7bfffff,0xf7c8c000-0xf7c8ffff irq 16 at device 0.0 on pci2
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 4 RX queues 4 TX queues
igb0: Using MSI-X interrupts with 5 vectors
<6>igb0: Ethernet address: a0:36:9f:03:d6:1c
<6>igb0: netmap queues/slots: TX 4/1024, RX 4/1024
igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7a00000-0xf7afffff,0xf7c88000-0xf7c8bfff irq 17 at device 0.1 on pci2
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 4 RX queues 4 TX queues
igb1: Using MSI-X interrupts with 5 vectors
<6>igb1: Ethernet address: a0:36:9f:03:d6:1d
<6>igb1: netmap queues/slots: TX 4/1024, RX 4/1024
igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7900000-0xf79fffff,0xf7c84000-0xf7c87fff irq 18 at device 0.2 on pci2
igb2: Using 1024 TX descriptors and 1024 RX descriptors
igb2: Using 4 RX queues 4 TX queues
igb2: Using MSI-X interrupts with 5 vectors
<6>igb2: Ethernet address: a0:36:9f:03:d6:1e
<6>igb2: netmap queues/slots: TX 4/1024, RX 4/1024
igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7800000-0xf78fffff,0xf7c80000-0xf7c83fff irq 19 at device 0.3 on pci2
igb3: Using 1024 TX descriptors and 1024 RX descriptors
igb3: Using 4 RX queues 4 TX queues
igb3: Using MSI-X interrupts with 5 vectors
<6>igb3: Ethernet address: a0:36:9f:03:d6:1f
<6>igb3: netmap queues/slots: TX 4/1024, RX 4/1024
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7d3b000-0xf7d3b3ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7d3a000-0xf7d3a7ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd0fff,0xd1000-0xd1fff,0xd2000-0xd2fff,0xd3000-0xd3fff,0xd4000-0xd4fff,0xd5000-0xd5fff,0xd6000-0xd6fff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1efd00002100
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1efd00002100
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1efd00002100
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1efd00002100
device_attach: est3 attach returned 6
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
hdacc1: <Realtek ALC280 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC280 Audio Function Group> at nid 1 on hdacc1
pcm0: <Realtek ALC280 (Analog 2.0+HP/2.0)> at nid 20,21 and 26 on hdaa1
pcm1: <Realtek ALC280 (Rear Analog)> at nid 27 and 24 on hdaa1
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
Trying to mount root from zfs:pfSense/ROOT/default []...
Root mount waiting for: usbus0 usbus1 usbus2 CAM
uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
Root mount waiting for: usbus0 usbus1 usbus2 CAM
uhub1: 21 ports with 21 removable, self powered
uhub0: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
ugen0.2: <CPS CP1500PFCLCD> at usbus0
Root mount waiting for: usbus0 usbus1 usbus2 CAM
ugen2.2: <vendor 0x8087 product 0x8000> at usbus2
uhub3 on uhub0
uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2
ugen1.2: <vendor 0x8087 product 0x8008> at usbus1
uhub4 on uhub2
uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1
ugen0.3: <vendor 0x0b38 product 0x0010> at usbus0
ukbd0 on uhub1
ukbd0: <vendor 0x0b38 product 0x0010, class 0/0, rev 1.10/1.02, addr 2> on usbus0
kbd2 at ukbd0
uhid0 on uhub1
uhid0: <vendor 0x0b38 product 0x0010, class 0/0, rev 1.10/1.02, addr 2> on usbus0
uhub4: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST3160813AS CC2H> ATA8-ACS SATA 2.x device
ada0: Serial Number 9SY1SJGP
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 152627MB (312581808 512 byte sectors)
ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
ses0: pass1,cd0 in 'Slot 01', SATA Slot: scbus1 target 0
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <TSSTcorp DVD+-RW SN-208FB D100> Removable CD-ROM SCSI device
cd0: Serial Number S13L6YBGC01CSM
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
<118>Configuring crash dumps...
<118>Using /dev/ada0p3 for dump device.
<118>Filesystems are clean, continuing...
<118>Mounting filesystems...
<118>
<118>        __
<118> _ __  / _|___  ___ _ __  ___  ___
<118>| '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \
<118>| |_) |  _\__ \  __/ | | \__ \  __/
<118>| .__/|_| |___/\___|_| |_|___/\___|
<118>|_|
<118>
<118>
<118>Welcome to pfSense 2.5.2-RELEASE...
<118>
<118>No core dumps found.
<118>...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/freeradius-3.0.22 /usr/local/lib/ipsec /usr/local/lib/mysql /usr/local/lib/perl5/5.32/mach/CORE
<118>32-bit compatibility ldconfig path:
<118>done.
<118>>>> Removing vital flag from php74... done.
<118>External config loader 1.0 is now starting... ada0p1 ada0p2 ada0p4
<118>Launching the init system...Updating CPU Microcode...
CPU: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz (3292.45-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c000800<SYSCALL,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
  Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
<118>Done.
<118>.... done.
<118>Initializing.................. done.
<118>Starting device manager (devd)...done.
<118>Loading configuration......done.
<118>Updating configuration...done.
<118>Checking config backups consistency.................................done.
<118>Setting up extended sysctls...done.
padlock0: No ACE support.
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f1400002100
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f1400002100
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f1400002100
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f1400002100
device_attach: est3 attach returned 6
<118>Setting timezone...done.
<118>Configuring loopback interface...
<6>lo0: link state changed to UP
<118>done.
<118>Starting syslog...done.
<118>Starting Secure Shell Services...done.
<118>Setting up interfaces microcode...done.
<118>Starting PC/SC Smart Card Services...done.
<118>Configuring loopback interface...done.
<118>Creating wireless clone interfaces...done.
<118>Configuring LAGG interfaces...done.
<118>Configuring VLAN interfaces...
<6>vlan0: changing name to 'igb0.2'
<6>vlan1: changing name to 'igb0.5'
<6>vlan2: changing name to 'igb0.3'
<118>done.
<118>Configuring QinQ interfaces...done.
<118>Configuring WAN interface...
<6>em0: link state changed to UP
<6>em0: link state changed to DOWN
<6>igb0: link state changed to UP
<6>igb0.2: link state changed to UP
<6>igb0.3: link state changed to UP
<6>igb0.5: link state changed to UP
<6>em0: link state changed to UP
<118>done.
<118>Configuring LAN interface...done.
<118>Configuring PUBLIC interface...done.
<118>Configuring SECURITY interface...done.
<118>Configuring IPsec VTI interfaces...done.
<118>Configuring CARP settings...done.
<118>Syncing OpenVPN settings...
<6>tun2: changing name to 'ovpns2'
<6>tun4: changing name to 'ovpns4'
<6>ovpns2: link state changed to UP
<118>done.
<6>ovpns4: link state changed to UP
<118>route: route has not been found
<118>route: route has not been found
<118>route: route has not been found
<6>pflog0: promiscuous mode enabled
<118>Configuring firewall......done.
<118>Starting PFLOG...done.
<118>Setting up gateway monitors...done.
<118>Setting up static routes...done.
<118>Setting up DNSs...
<118>Starting DNS Resolver...done.
<118>Synchronizing user settings...done.
<118>Starting webConfigurator...done.
<118>Configuring CRON...done.
<118>Starting NTP Server...done.
<118>Starting DHCP service...done.
<118>Configuring firewall......done.
<118>Starting captive portal(swtribe)... 
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched FQ_CODEL loaded
load_dn_sched dn_sched FQ_PIE loaded
load_dn_aqm dn_aqm CODEL loaded
load_dn_aqm dn_aqm PIE loaded
IPFW: starting up interface tracker
<118>done
<118>Starting captive portal(SWTribePublic)... done
<118>Generating RRD graphs...done.
<118>Starting syslog...done.
<118>Starting CRON... done.
<118> Starting package arping...done.
<118> Starting package nmap...done.
<118> Starting package squid3...done.
<118> Starting package pfBlockerNG...done.
<118> Starting package Service Watchdog...done.
<118> Starting package OpenVPN Client Export Utility...done.
<118> Starting package Lightsquid...done.
<118> Starting package Cron...done.
<118> Starting package mailreport...done.
<118> Starting package RRD Summary...done.
<118> Starting package nut...done.
<118> Starting package iperf...done.
<118> Starting package Traffic Totals...done.
<118> Starting package arpwatch...done.
<118> Starting package acme...done.
<6>igb0: promiscuous mode enabled
<6>igb0.2: promiscuous mode enabled
<6>igb0.3: promiscuous mode enabled
<6>igb0.5: promiscuous mode enabled
<118> Starting package squidGuard...done.
<118> Starting package freeradius3...done.
<118> Starting /usr/local/etc/rc.d/c-icap.sh...done.
<118> Starting /usr/local/etc/rc.d/clamd.sh...done.
<118> Starting /usr/local/etc/rc.d/dnsbl.sh...done.
<118> Starting /usr/local/etc/rc.d/lighttpd_ls.sh...done.
<118> Starting /usr/local/etc/rc.d/shutdown.nut.sh...done.
<118> Starting /usr/local/etc/rc.d/sqp_monitor.sh...done.
<118> Starting /usr/local/etc/rc.d/vnstatd.sh...done.
<118>pfSense 2.5.2-RELEASE amd64 Fri Jul 02 15:33:00 EDT 2021
<118>Bootup complete
<6>igb0: link state changed to DOWN
<6>igb0.2: link state changed to DOWN
<6>igb0.3: link state changed to DOWN
<6>igb0.5: link state changed to DOWN
<6>igb0: link state changed to UP
<6>igb0.2: link state changed to UP
<6>igb0.3: link state changed to UP
<6>igb0.5: link state changed to UP
<6>igb0.3: promiscuous mode disabled
<6>igb0.2: promiscuous mode disabled
<6>igb0: promiscuous mode disabled
<6>igb0.5: promiscuous mode disabled
<6>igb0: promiscuous mode enabled
<6>igb0.2: promiscuous mode enabled
<6>igb0.3: promiscuous mode enabled
<6>igb0.5: promiscuous mode enabled
<6>bridge0: Ethernet address: 02:a3:98:b8:b5:00
<6>bridge0: can't disable some capabilities on igb0.2: 0x400
<6>bridge0: link state changed to UP
<6>bridge0: link state changed to DOWN
<6>bridge0: Ethernet address: 02:a3:98:b8:b5:00
<6>bridge0: can't disable some capabilities on igb0.2: 0x400
<6>bridge0: link state changed to UP
<6>bridge0: link state changed to DOWN
<6>bridge0: Ethernet address: 02:a3:98:b8:b5:00
<6>bridge0: can't disable some capabilities on igb0.2: 0x400
<6>bridge0: link state changed to UP
<6>bridge0: can't disable some capabilities on igb0.2: 0x400
<6>igb1: promiscuous mode enabled
<6>igb1: link state changed to UP
<6>igb1: link state changed to DOWN
<6>igb1: link state changed to UP
<6>igb1: link state changed to DOWN
<6>igb1: link state changed to UP
<6>igb1: link state changed to DOWN
<6>igb1: link state changed to UP
<6>igb0.3: promiscuous mode disabled
<6>igb0.5: promiscuous mode disabled
<6>pflog0: promiscuous mode disabled
<6>ovpns2: link state changed to DOWN
<6>ovpns4: link state changed to DOWN
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining... 0 0 0 0 done
Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done
All buffers synced.
Uptime: 2h4m28s
uhub3: detached
uhub4: detached
ukbd0: detached
uhid0: detached
---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.2-STABLE fd0f54f44b5c(RELENG_2_5_0) pfSense amd64
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz (3292.44-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c000800<SYSCALL,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16508956672 (15744 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   CBX3   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 1 2 3
Timecounter "TSC-low" frequency 1646221918 Hz quality 1000
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8073dd40, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8073ddf0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8073dea0, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff80765730, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff807657e0, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80765890, 0) error 1
wlan: mac acl policy registered
random: entropy device external interface
module_register_init: MOD_LOAD (vesa, 0xffffffff8140c3e0, 0) error 19
kbd1 at kbdmux0
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
[ath_hal] loaded
000.000056 [4336] netmap_init               netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.5.2 (September 2019)
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <DELL CBX3   > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7400000-0xf77fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xf7d34000-0xf7d37fff irq 16 at device 3.0 on pci0
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7d20000-0xf7d2ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci_interrupt: host controller halted
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
uart2: <Intel Lynx Point KT Controller> port 0xf0e0-0xf0e7 mem 0xf7d3e000-0xf7d3efff irq 19 at device 22.3 on pci0
uart2: Using 1 MSI message
em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem 0xf7d00000-0xf7d1ffff,0xf7d3d000-0xf7d3dfff irq 20 at device 25.0 on pci0
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using an MSI interrupt
<6>em0: Ethernet address: 18:66:da:00:ea:9c
<6>em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7d3c000-0xf7d3c3ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
hdac1: <Intel Lynx Point HDA Controller> mem 0xf7d30000-0xf7d33fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib2
igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7b00000-0xf7bfffff,0xf7c8c000-0xf7c8ffff irq 16 at device 0.0 on pci2
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 4 RX queues 4 TX queues
igb0: Using MSI-X interrupts with 5 vectors
<6>igb0: Ethernet address: a0:36:9f:03:d6:1c
<6>igb0: netmap queues/slots: TX 4/1024, RX 4/1024
igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7a00000-0xf7afffff,0xf7c88000-0xf7c8bfff irq 17 at device 0.1 on pci2
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 4 RX queues 4 TX queues
igb1: Using MSI-X interrupts with 5 vectors
<6>igb1: Ethernet address: a0:36:9f:03:d6:1d
<6>igb1: netmap queues/slots: TX 4/1024, RX 4/1024
igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7900000-0xf79fffff,0xf7c84000-0xf7c87fff irq 18 at device 0.2 on pci2
igb2: Using 1024 TX descriptors and 1024 RX descriptors
igb2: Using 4 RX queues 4 TX queues
igb2: Using MSI-X interrupts with 5 vectors
<6>igb2: Ethernet address: a0:36:9f:03:d6:1e
<6>igb2: netmap queues/slots: TX 4/1024, RX 4/1024
igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7800000-0xf78fffff,0xf7c80000-0xf7c83fff irq 19 at device 0.3 on pci2
igb3: Using 1024 TX descriptors and 1024 RX descriptors
igb3: Using 4 RX queues 4 TX queues
igb3: Using MSI-X interrupts with 5 vectors
<6>igb3: Ethernet address: a0:36:9f:03:d6:1f
<6>igb3: netmap queues/slots: TX 4/1024, RX 4/1024
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7d3b000-0xf7d3b3ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7d3a000-0xf7d3a7ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd0fff,0xd1000-0xd1fff,0xd2000-0xd2fff,0xd3000-0xd3fff,0xd4000-0xd4fff,0xd5000-0xd5fff,0xd6000-0xd6fff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1efd00002100
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1efd00002100
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1efd00002100
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1efd00002100
device_attach: est3 attach returned 6
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
hdacc1: <Realtek ALC280 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC280 Audio Function Group> at nid 1 on hdacc1
pcm0: <Realtek ALC280 (Analog 2.0+HP/2.0)> at nid 20,21 and 26 on hdaa1
pcm1: <Realtek ALC280 (Rear Analog)> at nid 27 and 24 on hdaa1
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen2.1: <Intel EHCI root HUB> at usbus2
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
Trying to mount root from zfs:pfSense/ROOT/default []...
Root mount waiting for: usbus0 usbus1 usbus2 CAM
Root mount waiting for: usbus0 usbus1 usbus2 CAM
uhub2: 21 ports with 21 removable, self powered
uhub1: 3 ports with 3 removable, self powered
uhub0: 3 ports with 3 removable, self powered
ugen0.2: <CPS CP1500PFCLCD> at usbus0
Root mount waiting for: usbus0 usbus1 usbus2 CAM
ugen1.2: <vendor 0x8087 product 0x8008> at usbus1
uhub3 on uhub0
uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1
ugen2.2: <vendor 0x8087 product 0x8000> at usbus2
uhub4 on uhub1
uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2
ugen0.3: <vendor 0x0b38 product 0x0010> at usbus0
ukbd0 on uhub2
ukbd0: <vendor 0x0b38 product 0x0010, class 0/0, rev 1.10/1.02, addr 2> on usbus0
kbd2 at ukbd0
uhid0 on uhub2
uhid0: <vendor 0x0b38 product 0x0010, class 0/0, rev 1.10/1.02, addr 2> on usbus0
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST3160813AS CC2H> ATA8-ACS SATA 2.x device
ada0: Serial Number 9SY1SJGP
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 152627MB (312581808 512 byte sectors)
ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
ses0: pass1,cd0 in 'Slot 01', SATA Slot: scbus1 target 0
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <TSSTcorp DVD+-RW SN-208FB D100> Removable CD-ROM SCSI device
cd0: Serial Number S13L6YBGC01CSM
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
<118>Configuring crash dumps...
<118>Using /dev/ada0p3 for dump device.
<118>Filesystems are clean, continuing...
<118>Mounting filesystems...
<118>
<118>        __
<118> _ __  / _|___  ___ _ __  ___  ___
<118>| '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \
<118>| |_) |  _\__ \  __/ | | \__ \  __/
<118>| .__/|_| |___/\___|_| |_|___/\___|
<118>|_|
<118>
<118>
<118>Welcome to pfSense 2.5.2-RELEASE...
<118>
<118>No core dumps found.
<118>...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/freeradius-3.0.22 /usr/local/lib/ipsec /usr/local/lib/mysql /usr/local/lib/perl5/5.32/mach/CORE
<118>32-bit compatibility ldconfig path:
<118>done.
<118>>>> Removing vital flag from php74... done.
<118>External config loader 1.0 is now starting... ada0p1 ada0p2 ada0p4
<118>Launching the init system...Updating CPU Microcode...
CPU: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz (3292.44-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c000800<SYSCALL,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
  Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
<118>Done.
<118>.... done.
<118>Initializing.................. done.
<118>Starting device manager (devd)...done.
<118>Loading configuration......done.
<118>Updating configuration...done.
<118>Checking config backups consistency.................................done.
<118>Setting up extended sysctls...done.
padlock0: No ACE support.
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f1400002100
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f1400002100
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f1400002100
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1f1400002100
device_attach: est3 attach returned 6
<118>Setting timezone...done.
<118>Configuring loopback interface...
<6>lo0: link state changed to UP
<118>done.
<118>Starting syslog...done.
<118>Starting Secure Shell Services...done.
<118>Setting up interfaces microcode...done.
<118>Starting PC/SC Smart Card Services...done.
<118>Configuring loopback interface...done.
<118>Creating wireless clone interfaces...done.
<118>Configuring LAGG interfaces...done.
<118>Configuring VLAN interfaces...
<6>vlan0: changing name to 'igb0.2'
<6>vlan1: changing name to 'igb0.5'
<6>vlan2: changing name to 'igb0.3'
<118>done.
<118>Configuring QinQ interfaces...done.
<118>Configuring WAN interface...
<6>em0: link state changed to UP
<6>em0: link state changed to DOWN
<6>igb0: link state changed to UP
<6>igb0.2: link state changed to UP
<6>igb0.3: link state changed to UP
<6>igb0.5: link state changed to UP
<6>em0: link state changed to UP
<118>done.
<118>Configuring LAN interface...done.
<118>Configuring PUBLIC interface...done.
<118>Configuring SPAN interface...done.
<118>Configuring LAN2 interface...done.
<118>Configuring SECURITY interface...done.
<6>bridge0: Ethernet address: 02:a3:98:b8:b5:00
<6>bridge0: can't disable some capabilities on igb0.2: 0x400
<6>bridge0: link state changed to UP
<6>igb0: promiscuous mode enabled
<6>igb0.2: promiscuous mode enabled
<6>bridge0: can't disable some capabilities on igb0.2: 0x400
<6>igb1: promiscuous mode enabled
<118>Configuring IPsec VTI interfaces...done.
<118>Configuring CARP settings...done.
<118>Syncing OpenVPN settings...
<6>tun2: changing name to 'ovpns2'
<6>tun4: changing name to 'ovpns4'
<118>done.
<6>ovpns4: link state changed to UP
<6>ovpns2: link state changed to UP
<6>pflog0: promiscuous mode enabled
<118>Configuring firewall..
<6>igb1: link state changed to UP
<118>....done.
<118>Starting PFLOG...done.
<118>Setting up gateway monitors...done.
<118>Setting up static routes...done.
<118>Setting up DNSs...
<118>Starting DNS Resolver...done.
<118>Synchronizing user settings...done.
<118>Starting webConfigurator...done.
<118>Configuring CRON...done.
<118>Starting NTP Server...done.
<118>Starting DHCP service...done.
<118>Configuring firewall......done.
<118>Starting captive portal(SWTribePublic)... 
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched FQ_CODEL loaded
load_dn_sched dn_sched FQ_PIE loaded
load_dn_aqm dn_aqm CODEL loaded
load_dn_aqm dn_aqm PIE loaded
IPFW: starting up interface tracker
<118>done
<118>Generating RRD graphs...done.
<118>Starting syslog...done.
<118>Starting CRON... done.
<118> Starting package arping...done.
<118> Starting package nmap...done.
<118> Starting package squid3...done.
<118> Starting package pfBlockerNG...done.
<118> Starting package Service Watchdog...done.
<118> Starting package OpenVPN Client Export Utility...done.
<118> Starting package Lightsquid...done.
<118> Starting package Cron...done.
<118> Starting package mailreport...done.
<118> Starting package RRD Summary...done.
<118> Starting package nut...done.
<118> Starting package iperf...done.
<118> Starting package Traffic Totals...done.
<118> Starting package arpwatch...done.
<118> Starting package acme...done.
<6>igb0.3: promiscuous mode enabled
<6>igb0.5: promiscuous mode enabled
<118> Starting package squidGuard...done.
<118> Starting package freeradius3...done.
<118> Starting /usr/local/etc/rc.d/c-icap.sh...done.
<118> Starting /usr/local/etc/rc.d/clamd.sh...done.
<118> Starting /usr/local/etc/rc.d/dnsbl.sh...done.
<118> Starting /usr/local/etc/rc.d/lighttpd_ls.sh...done.
<118> Starting /usr/local/etc/rc.d/shutdown.nut.sh...done.
<118> Starting /usr/local/etc/rc.d/sqp_monitor.sh...done.
<118> Starting /usr/local/etc/rc.d/vnstatd.sh...done.
<118>pfSense 2.5.2-RELEASE amd64 Fri Jul 02 15:33:00 EDT 2021
<118>Bootup complete
<6>vlan3: changing name to 'igb1.2'
<6>igb1: link state changed to DOWN
<6>igb1.2: link state changed to DOWN
<6>igb1: link state changed to UP
<6>igb1.2: link state changed to UP
<6>igb1: link state changed to DOWN
<6>igb1.2: link state changed to DOWN
<6>bridge0: can't disable some capabilities on igb1.2: 0x400
<6>bridge0: can't disable some capabilities on igb0.2: 0x400
<6>igb1.2: promiscuous mode enabled
<6>igb1: link state changed to UP
<6>igb1.2: link state changed to UP
<6>igb0.3: promiscuous mode disabled
<6>igb0.5: promiscuous mode disabled
<6>pflog0: promiscuous mode disabled
<6>ovpns2: link state changed to DOWN
<6>ovpns4: link state changed to DOWN
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining... 0 0 0 0 done
Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done
All buffers synced.
Uptime: 14m34s
uhub4: detached
uhub3: detached
ukbd0: detached
uhid0: detached
---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.2-STABLE fd0f54f44b5c(RELENG_2_5_0) pfSense amd64
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz (3292.45-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c000800<SYSCALL,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16508956672 (15744 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   CBX3   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 1 2 3
Timecounter "TSC-low" frequency 1646225254 Hz quality 1000
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8073dd40, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8073ddf0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8073dea0, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff80765730, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff807657e0, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80765890, 0) error 1
wlan: mac acl policy registered
random: entropy device external interface
module_register_init: MOD_LOAD (vesa, 0xffffffff8140c3e0, 0) error 19
kbd1 at kbdmux0
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
[ath_hal] loaded
000.000056 [4336] netmap_init               netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.5.2 (September 2019)
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <DELL CBX3   > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7400000-0xf77fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xf7d34000-0xf7d37fff irq 16 at device 3.0 on pci0
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7d20000-0xf7d2ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci_interrupt: host controller halted
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
uart2: <Intel Lynx Point KT Controller> port 0xf0e0-0xf0e7 mem 0xf7d3e000-0xf7d3efff irq 19 at device 22.3 on pci0
uart2: Using 1 MSI message
em0: <Intel(R) PRO/1000 Network Connection> port 0xf080-0xf09f mem 0xf7d00000-0xf7d1ffff,0xf7d3d000-0xf7d3dfff irq 20 at device 25.0 on pci0
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using an MSI interrupt
<6>em0: Ethernet address: 18:66:da:00:ea:9c
<6>em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7d3c000-0xf7d3c3ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
hdac1: <Intel Lynx Point HDA Controller> mem 0xf7d30000-0xf7d33fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib2
igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7b00000-0xf7bfffff,0xf7c8c000-0xf7c8ffff irq 16 at device 0.0 on pci2
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 4 RX queues 4 TX queues
igb0: Using MSI-X interrupts with 5 vectors
<6>igb0: Ethernet address: a0:36:9f:03:d6:1c
<6>igb0: netmap queues/slots: TX 4/1024, RX 4/1024
igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7a00000-0xf7afffff,0xf7c88000-0xf7c8bfff irq 17 at device 0.1 on pci2
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 4 RX queues 4 TX queues
igb1: Using MSI-X interrupts with 5 vectors
<6>igb1: Ethernet address: a0:36:9f:03:d6:1d
<6>igb1: netmap queues/slots: TX 4/1024, RX 4/1024
igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7900000-0xf79fffff,0xf7c84000-0xf7c87fff irq 18 at device 0.2 on pci2
igb2: Using 1024 TX descriptors and 1024 RX descriptors
igb2: Using 4 RX queues 4 TX queues
igb2: Using MSI-X interrupts with 5 vectors
<6>igb2: Ethernet address: a0:36:9f:03:d6:1e
<6>igb2: netmap queues/slots: TX 4/1024, RX 4/1024
igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> mem 0xf7800000-0xf78fffff,0xf7c80000-0xf7c83fff irq 19 at device 0.3 on pci2
igb3: Using 1024 TX descriptors and 1024 RX descriptors
igb3: Using 4 RX queues 4 TX queues
igb3: Using MSI-X interrupts with 5 vectors
<6>igb3: Ethernet address: a0:36:9f:03:d6:1f
<6>igb3: netmap queues/slots: TX 4/1024, RX 4/1024
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7d3b000-0xf7d3b3ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7d3a000-0xf7d3a7ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd0fff,0xd1000-0xd1fff,0xd2000-0xd2fff,0xd3000-0xd3fff,0xd4000-0xd4fff,0xd5000-0xd5fff,0xd6000-0xd6fff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1efd00002100
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1efd00002100
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1efd00002100
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1efd00002100
device_attach: est3 attach returned 6
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
hdacc1: <Realtek ALC280 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC280 Audio Function Group> at nid 1 on hdacc1
pcm0: <Realtek ALC280 (Analog 2.0+HP/2.0)> at nid 20,21 and 26 on hdaa1
pcm1: <Realtek ALC280 (Rear Analog)> at nid 27 and 24 on hdaa1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
Trying to mount root from zfs:pfSense/ROOT/default []...
Root mount waiting for: usbus0 usbus1 usbus2 CAM
Root mount waiting for: usbus0 usbus1 usbus2 CAM
uhub2: 21 ports with 21 removable, self powered
uhub1: 3 ports with 3 removable, self powered
uhub0: 3 ports with 3 removable, self powered
ugen0.2: <CPS CP1500PFCLCD> at usbus0
Root mount waiting for: usbus0 usbus1 usbus2 CAM
ugen2.2: <vendor 0x8087 product 0x8000> at usbus2
uhub3 on uhub0
uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2
ugen1.2: <vendor 0x8087 product 0x8008> at usbus1
uhub4 on uhub1
uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1
ugen0.3: <vendor 0x0b38 product 0x0010> at usbus0
ukbd0 on uhub2
ukbd0: <vendor 0x0b38 product 0x0010, class 0/0, rev 1.10/1.02, addr 2> on usbus0
kbd2 at ukbd0
uhid0 on uhub2
uhid0: <vendor 0x0b38 product 0x0010, class 0/0, rev 1.10/1.02, addr 2> on usbus0
uhub4: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST3160813AS CC2H> ATA8-ACS SATA 2.x device
ada0: Serial Number 9SY1SJGP
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 152627MB (312581808 512 byte sectors)
ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
ses0: pass1,cd0 in 'Slot 01', SATA Slot: scbus1 target 0
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <TSSTcorp DVD+-RW SN-208FB D100> Removable CD-ROM SCSI device
cd0: Serial Number S13L6YBGC01CSM
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
<118>Configuring crash dumps...
<118>Using /dev/ada0p3 for dump device.
<118>Filesystems are clean, continuing...
<118>Mounting filesystems...
<118>
<118>        __
<118> _ __  / _|___  ___ _ __  ___  ___
<118>| '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \
<118>| |_) |  _\__ \  __/ | | \__ \  __/
<118>| .__/|_| |___/\___|_| |_|___/\___|
<118>|_|
<118>
<118>
<118>Welcome to pfSense 2.5.2-RELEASE...
<118>
<118>No core dumps found.
<118>...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/freeradius-3.0.22 /usr/local/lib/ipsec /usr/local/lib/mysql /usr/local/lib/perl5/5.32/mach/CORE
<118>32-bit compatibility ldconfig path:
<118>done.
<118>>>> Removing vital flag from php74... done.
<118>External config loader 1.0 is now starting... ada0p1 ada0p2 ada0p4
<118>Launching the init system...Updating CPU Microcode...
CPU: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz (3292.45-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c000800<SYSCALL,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
  Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
<118>Done.
<118>.... done.
<118>Initializing.................. done.
<118>Starting device manager (devd)...done.
<118>Loading configuration......done.
<118>Updating configuration...done.
<118>Checking config backups consistency.................................done.
<118>Setting up extended sysctls...done.
padlock0: No ACE support.
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1efb00002100
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1efb00002100
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1efb00002100
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 1efb00002100
device_attach: est3 attach returned 6
<118>Setting timezone...done.
<118>Configuring loopback interface...
<6>lo0: link state changed to UP
<118>done.
<118>Starting syslog...done.
<118>Starting Secure Shell Services...done.
<118>Setting up interfaces microcode...done.
<118>Starting PC/SC Smart Card Services...done.
<118>Configuring loopback interface...done.
<118>Creating wireless clone interfaces...done.
<118>Configuring LAGG interfaces...done.
<118>Configuring VLAN interfaces...
<6>vlan0: changing name to 'igb0.2'
<6>vlan1: changing name to 'igb0.5'
<6>vlan2: changing name to 'igb0.3'
<6>vlan3: changing name to 'igb1.2'
<118>done.
<118>Configuring QinQ interfaces...done.
<118>Configuring WAN interface...
<6>em0: link state changed to UP
<6>em0: link state changed to DOWN
<6>igb0: link state changed to UP
<6>igb0.2: link state changed to UP
<6>igb0.3: link state changed to UP
<6>igb0.5: link state changed to UP
<6>igb1: link state changed to UP
<6>igb1.2: link state changed to UP
<6>em0: link state changed to UP
<118>done.
<118>Configuring LAN interface...done.
<118>Configuring PUBLIC interface...done.
<118>Configuring SPAN interface...done.
<118>Configuring LAN2 interface...done.
<118>Configuring SECURITY interface...done.
<6>bridge0: Ethernet address: 02:a3:98:b8:b5:00
<6>bridge0: can't disable some capabilities on igb0.2: 0x400
<6>bridge0: link state changed to UP
<6>igb0: promiscuous mode enabled
<6>igb0.2: promiscuous mode enabled
<6>bridge0: can't disable some capabilities on igb1.2: 0x400
<6>bridge0: can't disable some capabilities on igb0.2: 0x400
<6>igb1: promiscuous mode enabled
<6>igb1.2: promiscuous mode enabled
<118>Configuring IPsec VTI interfaces...done.
<118>Configuring CARP settings...done.
<118>Syncing OpenVPN settings...
<6>tun2: changing name to 'ovpns2'
<6>tun4: changing name to 'ovpns4'
<6>ovpns2: link state changed to UP
<118>done.
<6>ovpns4: link state changed to UP
<6>pflog0: promiscuous mode enabled
<118>Configuring firewall......done.
<118>Starting PFLOG...done.
<118>Setting up gateway monitors...done.
<118>Setting up static routes...done.
<118>Setting up DNSs...
<118>Starting DNS Resolver...done.
<118>Synchronizing user settings...done.
<118>Starting webConfigurator...done.
<118>Configuring CRON...done.
<118>Starting NTP Server...done.
<118>Starting DHCP service...done.
<118>Configuring firewall......done.
<118>Starting captive portal(SWTribePublic)... 
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched FQ_CODEL loaded
load_dn_sched dn_sched FQ_PIE loaded
load_dn_aqm dn_aqm CODEL loaded
load_dn_aqm dn_aqm PIE loaded
IPFW: starting up interface tracker
<118>done
<118>Generating RRD graphs...done.
<118>Starting syslog...done.
<118>Starting CRON... done.
<118> Starting package arping...done.
<118> Starting package nmap...done.
<118> Starting package squid3...done.
<118> Starting package pfBlockerNG...done.
<118> Starting package Service Watchdog...done.
<118> Starting package OpenVPN Client Export Utility...done.
<118> Starting package Lightsquid...done.
<118> Starting package Cron...done.
<118> Starting package mailreport...done.
<118> Starting package RRD Summary...done.
<118> Starting package nut...done.
<118> Starting package iperf...done.
<118> Starting package Traffic Totals...done.
<118> Starting package arpwatch...done.
<118> Starting package acme...done.
<6>igb0.3: promiscuous mode enabled
<6>igb0.5: promiscuous mode enabled
<118> Starting package squidGuard...done.
<118> Starting package freeradius3...done.
<118> Starting /usr/local/etc/rc.d/c-icap.sh...done.
<118> Starting /usr/local/etc/rc.d/clamd.sh...done.
<118> Starting /usr/local/etc/rc.d/dnsbl.sh...done.
<118> Starting /usr/local/etc/rc.d/lighttpd_ls.sh...done.
<118> Starting /usr/local/etc/rc.d/shutdown.nut.sh...done.
<118> Starting /usr/local/etc/rc.d/sqp_monitor.sh...done.
<118> Starting /usr/local/etc/rc.d/vnstatd.sh...done.
<118>pfSense 2.5.2-RELEASE amd64 Fri Jul 02 15:33:00 EDT 2021
<118>Bootup complete
<6>igb1: link state changed to DOWN
<6>igb1.2: link state changed to DOWN
<6>bridge0: can't disable some capabilities on igb0.2: 0x400
<6>igb1: link state changed to UP
<6>igb1.2: link state changed to UP
<6>bridge0: can't disable some capabilities on igb0.2: 0x400
<6>igb1: link state changed to DOWN
<6>igb1.2: link state changed to DOWN
<6>bridge0: can't disable some capabilities on igb0.2: 0x400
<6>igb1: promiscuous mode disabled
<6>igb1.2: promiscuous mode disabled
<6>bridge0: link state changed to DOWN
<6>bridge0: Ethernet address: 02:a3:98:b8:b5:00
<6>bridge0: can't disable some capabilities on igb0.2: 0x400
<6>bridge0: link state changed to UP
<6>bridge0: can't disable some capabilities on igb0.2: 0x400
<6>igb1: promiscuous mode enabled
<6>igb1: link state changed to UP
<6>igb1.2: link state changed to UP
<6>igb2: link state changed to UP
<6>igb0.3: promiscuous mode disabled
<6>igb0.5: promiscuous mode disabled
<6>igb0.3: promiscuous mode enabled
<6>igb0.5: promiscuous mode enabled
<6>igb1: link state changed to DOWN
<6>igb1.2: link state changed to DOWN
<6>igb1: link state changed to UP
<6>igb1.2: link state changed to UP
<6>igb1: link state changed to DOWN
<6>igb1.2: link state changed to DOWN
<6>igb1: link state changed to UP
<6>igb1.2: link state changed to UP
<6>igb1: link state changed to DOWN
<6>igb1.2: link state changed to DOWN
<6>igb2: link state changed to DOWN
<6>igb1: link state changed to UP
<6>igb1.2: link state changed to UP
<6>igb2: link state changed to UP
<6>igb1: link state changed to DOWN
<6>igb1.2: link state changed to DOWN
<6>igb1: link state changed to UP
<6>igb1.2: link state changed to UP
<6>igb0.3: promiscuous mode disabled
<6>igb0.5: promiscuous mode disabled
<6>igb0.3: promiscuous mode enabled
<6>igb0.5: promiscuous mode enabled


Fatal trap 12: page fault while in kernel mode
cpuid = 2; apic id = 04
fault virtual address	= 0x28
fault code		= supervisor read data, page not present
instruction pointer	= 0x20:0xffffffff80ec01fe
stack pointer	        = 0x28:0xfffffe00747f2950
frame pointer	        = 0x28:0xfffffe00747f2980
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 12 (swi4: clock (0))
trap number		= 12
panic: page fault
cpuid = 2
time = 1629420461
KDB: enter: panic