---<<BOOT>>---\
Copyright (c) 1992-2021 The FreeBSD Project.\
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994\
	The Regents of the University of California. All rights reserved.\
FreeBSD is a registered trademark of The FreeBSD Foundation.\
FreeBSD 12.3-STABLE RELENG_2_6_0-n226742-1285d6d205f pfSense amd64\
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)\
VT(vga): resolution 640x480\
CPU: Intel(R) Xeon(R) E-2224 CPU @ 3.40GHz (3408.25-MHz K8-class CPU)\
  Origin="GenuineIntel"  Id=0x906ea  Family=0x6  Model=0x9e  Stepping=10\
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>\
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>\
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>\
  AMD Features2=0x121<LAHF,ABM,Prefetch>\
  Structured Extended Features=0x29c6fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>\
  Structured Extended Features3=0x9c002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD>\
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>\
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID\
  TSC: P-state invariant, performance statistics\
real memory  = 17179869184 (16384 MB)\
avail memory = 16403628032 (15643 MB)\
Event timer "LAPIC" quality 600\
ACPI APIC Table: <DELL   PE_SC3  >\
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs\
FreeBSD/SMP: 1 package(s) x 4 core(s)\
random: unblocking device.\
ioapic0 <Version 2.0> irqs 0-119 on motherboard\
Launching APs: 1 2 3\
Timecounter "TSC-low" frequency 1704122882 Hz quality 1000\
random: entropy device external interface\
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.\
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.\
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80739000, 0) error 1\
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.\
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.\
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff807390b0, 0) error 1\
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.\
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.\
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80739160, 0) error 1\
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.\
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.\
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff807609f0, 0) error 1\
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.\
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.\
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80760aa0, 0) error 1\
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.\
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.\
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80760b50, 0) error 1\
wlan: mac acl policy registered\
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.\
WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0.\
module_register_init: MOD_LOAD (vesa, 0xffffffff8140a210, 0) error 19\
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.\
kbd1 at kbdmux0\
[ath_hal] loaded\
random: registering fast source Intel Secure Key RNG\
random: fast provider: "Intel Secure Key RNG"\
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.\
000.000056 [4344] netmap_init               netmap: loaded module\
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)\
nexus0\
vtvga0: <VT VGA driver> on motherboard\
cryptosoft0: <software crypto> on motherboard\
acpi0: <DELL PE_SC3> on motherboard\
acpi0: Power Button (fixed)\
cpu0: <ACPI CPU> on acpi0\
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0\
Timecounter "HPET" frequency 24000000 Hz quality 950\
Event timer "HPET" frequency 24000000 Hz quality 550\
Event timer "HPET1" frequency 24000000 Hz quality 440\
Event timer "HPET2" frequency 24000000 Hz quality 440\
Event timer "HPET3" frequency 24000000 Hz quality 440\
Event timer "HPET4" frequency 24000000 Hz quality 440\
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0\
Timecounter "i8254" frequency 1193182 Hz quality 0\
Event timer "i8254" frequency 1193182 Hz quality 100\
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900\
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0\
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0\
pci0: <ACPI PCI bus> on pcib0\
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0\
pci1: <ACPI PCI bus> on pcib1\
ix0: <Intel(R) X520 82599ES (SFI/SFP+)> port 0x3020-0x303f mem 0x91980000-0x919fffff,0x91a04000-0x91a07fff irq 16 at device 0.0 on pci1\
ix0: Using 2048 TX descriptors and 2048 RX descriptors\
ix0: Using 4 RX queues 4 TX queues\
ix0: Using MSI-X interrupts with 5 vectors\
ix0: allocated for 4 queues\
ix0: allocated for 4 rx queues\
ix0: Ethernet address: e8:ea:6a:06:55:ea\
ix0: PCI Express Bus: Speed 5.0GT/s Width x8\
ix0: eTrack 0x800006d1 PHY FW V65535\
ix0: netmap queues/slots: TX 4/2048, RX 4/2048\
ix1: <Intel(R) X520 82599ES (SFI/SFP+)> port 0x3000-0x301f mem 0x91900000-0x9197ffff,0x91a00000-0x91a03fff irq 17 at device 0.1 on pci1\
ix1: Using 2048 TX descriptors and 2048 RX descriptors\
ix1: Using 4 RX queues 4 TX queues\
ix1: Using MSI-X interrupts with 5 vectors\
ix1: allocated for 4 queues\
ix1: allocated for 4 rx queues\
ix1: Ethernet address: e8:ea:6a:06:55:eb\
ix1: PCI Express Bus: Speed 5.0GT/s Width x8\
ix1: eTrack 0x800006d1 PHY FW V65535\
ix1: netmap queues/slots: TX 4/2048, RX 4/2048\
xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0x91e00000-0x91e0ffff irq 16 at device 20.0 on pci0\
xhci0: 32 bytes context size, 64-bit DMA\
usbus0: waiting for BIOS to give up control\
xhci_interrupt: host controller halted\
xhci_interrupt: host controller halted\
xhci_interrupt: host controller halted\
usbus0 on xhci0\
usbus0: 5.0Gbps Super Speed USB v3.0\
pci0: <memory, RAM> at device 20.2 (no driver attached)\
pci0: <simple comms> at device 22.0 (no driver attached)\
pci0: <simple comms> at device 22.4 (no driver attached)\
ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x4040-0x4047,0x4048-0x404b,0x4020-0x403f mem 0x91e12000-0x91e13fff,0x91e1d000-0x91e1d0ff,0x91e1c000-0x91e1c7ff irq 16 at device 23.0 on pci0\
ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported\
ahcich0: <AHCI channel> at channel 0 on ahci0\
ahcich1: <AHCI channel> at channel 1 on ahci0\
ahcich2: <AHCI channel> at channel 2 on ahci0\
ahcich3: <AHCI channel> at channel 3 on ahci0\
ahcich4: <AHCI channel> at channel 4 on ahci0\
ahcich5: <AHCI channel> at channel 5 on ahci0\
ahciem0: <AHCI enclosure management bridge> on ahci0\
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 27.0 on pci0\
pci2: <ACPI PCI bus> on pcib2\
ix2: <Intel(R) X520 82599ES (SFI/SFP+)> port 0x2020-0x203f mem 0x91b80000-0x91bfffff,0x91c04000-0x91c07fff irq 16 at device 0.0 on pci2\
ix2: Using 2048 TX descriptors and 2048 RX descriptors\
ix2: Using 4 RX queues 4 TX queues\
ix2: Using MSI-X interrupts with 5 vectors\
ix2: allocated for 4 queues\
ix2: allocated for 4 rx queues\
ix2: Ethernet address: e8:ea:6a:06:51:34\
ix2: PCI Express Bus: Speed 5.0GT/s Width x4\
ix2: eTrack 0x800006d1 PHY FW V65535\
ix2: netmap queues/slots: TX 4/2048, RX 4/2048\
ix3: <Intel(R) X520 82599ES (SFI/SFP+)> port 0x2000-0x201f mem 0x91b00000-0x91b7ffff,0x91c00000-0x91c03fff irq 17 at device 0.1 on pci2\
ix3: Using 2048 TX descriptors and 2048 RX descriptors\
ix3: Using 4 RX queues 4 TX queues\
ix3: Using MSI-X interrupts with 5 vectors\
ix3: allocated for 4 queues\
ix3: allocated for 4 rx queues\
ix3: Ethernet address: e8:ea:6a:06:51:35\
ix3: PCI Express Bus: Speed 5.0GT/s Width x4\
ix3: eTrack 0x800006d1 PHY FW V65535\
ix3: netmap queues/slots: TX 4/2048, RX 4/2048\
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0\
pci3: <ACPI PCI bus> on pcib3\
pcib4: <PCI-PCI bridge> irq 16 at device 0.0 on pci3\
pci4: <PCI bus> on pcib4\
vgapci0: <VGA-compatible display> mem 0x90000000-0x90ffffff,0x91808000-0x9180bfff,0x91000000-0x917fffff irq 16 at device 0.0 on pci4\
vgapci0: Boot video device\
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0\
pci5: <ACPI PCI bus> on pcib5\
bge0: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91d30000-0x91d3ffff,0x91d40000-0x91d4ffff,0x91d50000-0x91d5ffff irq 17 at device 0.0 on pci5\
bge0: APE FW version: NCSI v1.5.28.0\
bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E\
miibus0: <MII bus> on bge0\
brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0\
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow\
bge0: Using defaults for TSO: 65518/35/2048\
bge0: Ethernet address: cc:48:3a:0b:a0:0d\
bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91d00000-0x91d0ffff,0x91d10000-0x91d1ffff,0x91d20000-0x91d2ffff irq 18 at device 0.1 on pci5\
bge1: APE FW version: NCSI v1.5.28.0\
bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E\
miibus1: <MII bus> on bge1\
brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1\
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow\
bge1: Using defaults for TSO: 65518/35/2048\
bge1: Ethernet address: cc:48:3a:0b:a0:0e\
pci0: <simple comms> at device 30.0 (no driver attached)\
isab0: <PCI-ISA bridge> at device 31.0 on pci0\
isa0: <ISA bus> on isab0\
pci0: <serial bus> at device 31.5 (no driver attached)\
acpi_button0: <Sleep Button> on acpi0\
acpi_acad0: <AC Adapter> on acpi0\
acpi_button1: <Power Button> on acpi0\
apei0: <ACPI Platform Error Interface> on acpi0\
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0\
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0\
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xed800-0xf17ff pnpid ORM0000 on isa0\
atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0\
atrtc0: Warning: Couldn't map I/O.\
atrtc0: registered as a time-of-day clock, resolution 1.000000s\
Event timer "RTC" frequency 32768 Hz quality 0\
est0: <Enhanced SpeedStep Frequency Control> on cpu0\
est: CPU supports Enhanced Speedstep, but is not recognized.\
est: cpu_vendor GenuineIntel, msr 29c200002a00\
device_attach: est0 attach returned 6\
est: CPU supports Enhanced Speedstep, but is not recognized.\
est: cpu_vendor GenuineIntel, msr 29c200002a00\
device_attach: est1 attach returned 6\
est: CPU supports Enhanced Speedstep, but is not recognized.\
est: cpu_vendor GenuineIntel, msr 29c200002a00\
device_attach: est2 attach returned 6\
est: CPU supports Enhanced Speedstep, but is not recognized.\
est: cpu_vendor GenuineIntel, msr 29c200002a00\
device_attach: est3 attach returned 6\
ZFS filesystem version: 5\
ZFS storage pool version: features support (5000)\
Timecounters tick every 1.000 msec\
ugen0.1: <0x8086 XHCI root HUB> at usbus0\
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0\
Trying to mount root from zfs:pfSense/ROOT/default []...\
Root mount waiting for: usbus0 CAM\
Root mount waiting for: usbus0 CAM\
uhub0: 26 ports with 26 removable, self powered\
ugen0.2: <vendor 0x1604 product 0x10c0> at usbus0\
uhub1 on uhub0\
uhub1: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 1> on usbus0\
Root mount waiting for: usbus0 CAM\
Root mount waiting for: usbus0 CAM\
Root mount waiting for: usbus0 CAM\
uhub1: 4 ports with 4 removable, self powered\
ugen0.3: <vendor 0x1604 product 0x10c0> at usbus0\
uhub2 on uhub1\
uhub2: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 2> on usbus0\
Root mount waiting for: usbus0 CAM\
Root mount waiting for: usbus0 CAM\
Root mount waiting for: usbus0 CAM\
uhub2: 4 ports with 4 removable, self powered\
ugen0.4: <vendor 0x1604 product 0x10c0> at usbus0\
uhub3 on uhub1\
uhub3: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 3> on usbus0\
Root mount waiting for: usbus0 CAM\
Root mount waiting for: usbus0 CAM\
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0\
ada0: <MZ7KH480HAHQ0D3 HF58> ACS-4 ATA SATA 3.x device\
ada0: Serial Number S5CNNA0RA25873\
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)\
ada0: Command Queueing enabled\
ada0: 457862MB (937703088 512 byte sectors)\
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>\
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0\
ada1: <MZ7KH480HAHQ0D3 HF58> ACS-4 ATA SATA 3.x device\
ada1: Serial Number S5CNNA0RA25897\
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)\
ada1: Command Queueing enabled\
ada1: 457862MB (937703088 512 byte sectors)\
ada1: quirks=0x3<4K,NCQ_TRIM_BROKEN>\
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0\
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device\
ses0: SEMB SES Device\
ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0\
ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0\
uhub3: 4 ports with 4 removable, self powered\
CPU: Intel(R) Xeon(R) E-2224 CPU @ 3.40GHz (3408.25-MHz K8-class CPU)\
  Origin="GenuineIntel"  Id=0x906ea  Family=0x6  Model=0x9e  Stepping=10\
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>\
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>\
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>\
  AMD Features2=0x121<LAHF,ABM,Prefetch>\
  Structured Extended Features=0x29c6fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>\
  Structured Extended Features3=0x9c002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD>\
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>\
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID\
  TSC: P-state invariant, performance statistics\
coretemp0: <CPU On-Die Thermal Sensors> on cpu0\
est0: <Enhanced SpeedStep Frequency Control> on cpu0\
est: CPU supports Enhanced Speedstep, but is not recognized.\
est: cpu_vendor GenuineIntel, msr 29c200002a00\
device_attach: est0 attach returned 6\
est: CPU supports Enhanced Speedstep, but is not recognized.\
est: cpu_vendor GenuineIntel, msr 29c200002a00\
device_attach: est1 attach returned 6\
est: CPU supports Enhanced Speedstep, but is not recognized.\
est: cpu_vendor GenuineIntel, msr 29c200002a00\
device_attach: est2 attach returned 6\
est: CPU supports Enhanced Speedstep, but is not recognized.\
est: cpu_vendor GenuineIntel, msr 29c300002a00\
device_attach: est3 attach returned 6\
lo0: link state changed to UP\

pflog0: promiscuous mode enabled\
ix0: link state changed to UP\

load_dn_sched dn_sched FIFO loaded\
load_dn_sched dn_sched QFQ loaded\
load_dn_sched dn_sched RR loaded\
load_dn_sched dn_sched WF2Q+ loaded\
load_dn_sched dn_sched PRIO loaded\
load_dn_sched dn_sched FQ_CODEL loaded\
load_dn_sched dn_sched FQ_PIE loaded\
load_dn_aqm dn_aqm CODEL loaded\
load_dn_aqm dn_aqm PIE loaded\
ix1: link state changed to UP\
ix1: promiscuous mode enabled\
ix2: link state changed to UP\
ix2: link state changed to DOWN\
ix2: link state changed to UP\
ix2: link state changed to DOWN\
ix2: link state changed to UP\
ix3: link state changed to UP\

ix1: promiscuous mode disabled\
ix1: promiscuous mode enabled\
pid 21471 (ntopng), jid 0, uid 0: exited on signal 6 (core dumped)\
ix1: promiscuous mode disabled\
ix1: promiscuous mode enabled\
[zone: pf states] PF states limit reached\
[zone: pf states] PF states limit reached\
[zone: pf states] PF states limit reached\
[zone: pf states] PF states limit reached\
[zone: pf states] PF states limit reached\
[zone: pf states] PF states limit reached\
ix1: promiscuous mode disabled\
ix1: promiscuous mode enabled\
ix1: link state changed to DOWN\
ix1: link state changed to UP\
[zone: pf states] PF states limit reached\
[zone: pf states] PF states limit reached\
[zone: pf states] PF states limit reached\
ix1: link state changed to DOWN\
ix1: link state changed to UP\
ix1: link state changed to DOWN\
ix1: link state changed to UP\
ix1: link state changed to DOWN\
ix1: link state changed to UP\
[zone: pf states] PF states limit reached\
[zone: pf states] PF states limit reached\
[zone: pf states] PF states limit reached\
[zone: pf states] PF states limit reached\
[zone: pf states] PF states limit reached\
[zone: pf states] PF states limit reached\
[zone: pf states] PF states limit reached\
[zone: pf states] PF states limit reached\
ix1: promiscuous mode disabled\
ix1: promiscuous mode enabled\
ix1: promiscuous mode disabled\
ix1: promiscuous mode enabled}