er_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80739000, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff807390b0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80739160, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff807609f0, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80760aa0, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80760b50, 0) error 1
wlan: mac acl policy registered
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0.
module_register_init: MOD_LOAD (vesa, 0xffffffff8140a210, 0) error 19
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd0 at kbdmux0
[ath_hal] loaded
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
000.000056 [4344] netmap_init               netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <COREv4 COREBOOT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: could not evaluate _ADR - AE_NOT_FOUND
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0x90000000-0x90ffffff,0x80000000-0x8fffffff at device 2.0 on pci0
vgapci0: Boot video device
ahci0: <AHCI SATA controller> port 0x5040-0x505f mem 0x91414000-0x914147ff irq 19 at device 19.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
xhci0: <Intel Braswell USB 3.0 controller> mem 0x91400000-0x9140ffff irq 20 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
hdac0: <Intel Braswell HDA Controller> mem 0x91410000-0x91413fff irq 22 at device 27.0 on pci0
pcib1: <PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <PCI bus> on pcib1
igb0: <Intel(R) I211 (Copper)> port 0x1000-0x101f mem 0x91000000-0x9101ffff,0x91020000-0x91023fff irq 16 at device 0.0 on pci1
igb0: NVM V0.6 imgtype1
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 2 RX queues 2 TX queues
igb0: Using MSI-X interrupts with 3 vectors
<6>igb0: Ethernet address: 00:e0:97:1b:ac:ac
<6>igb0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib2: <PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <PCI bus> on pcib2
igb1: <Intel(R) I211 (Copper)> port 0x2000-0x201f mem 0x91100000-0x9111ffff,0x91120000-0x91123fff irq 16 at device 0.0 on pci2
igb1: NVM V0.6 imgtype1
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 2 RX queues 2 TX queues
igb1: Using MSI-X interrupts with 3 vectors
<6>igb1: Ethernet address: 00:e0:97:1b:ac:ad
<6>igb1: netmap queues/slots: TX 2/1024, RX 2/1024
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
igb2: <Intel(R) I211 (Copper)> port 0x3000-0x301f mem 0x91200000-0x9121ffff,0x91220000-0x91223fff irq 16 at device 0.0 on pci3
igb2: NVM V0.6 imgtype1
igb2: Using 1024 TX descriptors and 1024 RX descriptors
igb2: Using 2 RX queues 2 TX queues
igb2: Using MSI-X interrupts with 3 vectors
<6>igb2: Ethernet address: 00:e0:97:1b:ac:ae
<6>igb2: netmap queues/slots: TX 2/1024, RX 2/1024
pcib4: <PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci4: <PCI bus> on pcib4
igb3: <Intel(R) I211 (Copper)> port 0x4000-0x401f mem 0x91300000-0x9131ffff,0x91320000-0x91323fff irq 16 at device 0.0 on pci4
igb3: NVM V0.6 imgtype1
igb3: Using 1024 TX descriptors and 1024 RX descriptors
igb3: Using 2 RX queues 2 TX queues
igb3: Using MSI-X interrupts with 3 vectors
<6>igb3: Ethernet address: 00:e0:97:1b:ac:af
<6>igb3: netmap queues/slots: TX 2/1024, RX 2/1024
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
orm0: <ISA Option ROM> at iomem 0xee800-0xeffff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC897 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC897 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0
pcm1: <Realtek ALC897 (Front Analog)> at nid 27 and 25 on hdaa0
pcm2: <Realtek ALC897 (Rear Digital)> at nid 30 on hdaa0
hdacc1: <Intel Braswell HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Braswell Audio Function Group> at nid 1 on hdacc1
hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (6) in association 1! Disabling association.
hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (7) in association 1! Disabling association.
Trying to mount root from zfs:pfSense/ROOT/default []...
ugen0.1: <0x8086 XHCI root HUB> at usbus0
Root mount waiting for: CAM usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: 13 ports with 13 removable, self powered
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Protectli 120GB mSATA SBFM61.5> ACS-4 ATA SATA 3.x device
ada0: Serial Number 833407270F0800061518
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
<118>Configuring crash dumps...
<118>Using /dev/ada0p2 for dump device.
<118>Filesystems are clean, continuing...
<118>Mounting filesystems...
<118>
<118>        __
<118> _ __  / _|___  ___ _ __  ___  ___
<118>| '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \
<118>| |_) |  _\__ \  __/ | | \__ \  __/
<118>| .__/|_| |___/\___|_| |_|___/\___|
<118>|_|
<118>
<118>
<118>Welcome to pfSense 2.6.0-RELEASE...
<118>
<118>savecore 103 - - reboot after panic: page fault
<118>savecore 103 - - writing core to /var/crash/textdump.tar.0
<118>...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/ipsec /usr/local/lib/perl5/5.32/mach/CORE
<118>32-bit compatibility ldconfig path:
<118>done.
<118>>>> Removing vital flag from php74... done.
<118>External config loader 1.0 is now starting... ada0p1 ada0p3
<118>Launching the init system...Updating CPU Microcode...
CPU: Intel(R) Celeron(R) CPU  J3160  @ 1.60GHz (1600.04-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x406c4  Family=0x6  Model=0x4c  Stepping=4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
  Structured Extended Features3=0xc000400<MD_CLEAR,IBPB,STIBP>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
<118>Done.
<118>.... done.
<118>Initializing.................. done.
<118>Starting device manager (devd)...done.
<118>Loading configuration......done.
<118>Updating configuration...done.
<118>Checking config backups consistency.................................done.
<118>Setting up extended sysctls...done.
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard
WARNING: Device "crypto" is Giant locked and may be deleted before FreeBSD 14.0.
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
<118>Setting timezone...done.
<118>Configuring loopback interface...
<6>lo0: link state changed to UP
<118>done.
<118>Starting syslog...done.
<118>Setting up interfaces microcode...done.
<118>Removed leftover dhcp6c lock file: /tmp/dhcp6c_igb0_lock
<118>Configuring loopback interface...done.
<118>Configuring VLAN interfaces...
<6>vlan0: changing name to 'igb1.10'
<6>vlan1: changing name to 'igb1.107'
<6>vlan2: changing name to 'igb1.20'
<6>vlan3: changing name to 'igb1.30'
<6>vlan4: changing name to 'igb1.40'
<118>done.
<118>Configuring SECURE_LAN interface...done.
<118>Configuring IOT_LAN interface...done.
<118>Configuring RENTAL_LAN interface...done.
<118>Configuring GUEST_LAN interface...done.
<118>Configuring VM_LAN interface...done.
<118>Configuring LAN interface...done.
<118>Configuring WAN interface...
<6>igb0: link state changed to UP
<6>igb1: link state changed to UP
<6>igb1.20: link state changed to UP
<6>igb1.40: link state changed to UP
<6>igb1.10: link state changed to UP
<6>igb1.107: link state changed to UP
<6>igb1.30: link state changed to UP
<118>done.
<118>Configuring CARP settings...done.
<118>Syncing OpenVPN settings...done.
<6>pflog0: promiscuous mode enabled
<118>Configuring firewall.....0 addresses deleted.
<118>.done.
<118>Starting PFLOG...done.
<118>Setting up gateway monitors...done.
<118>Setting up static routes...done.
<118>Setting up DNSs...
<118>Starting DNS Resolver...done.
<118>Synchronizing user settings...done.
<118>Configuring CRON...done.
<118>Bootstrapping clock...done.
<118>Starting NTP Server...done.
<118>Starting webConfigurator...done.
<118>Starting DHCP service...done.
<118>Starting DHCPv6 service...done.
<118>Configuring firewall.....0 addresses deleted.
<118>0 addresses deleted.
<118>.done.
<118>Generating RRD graphs...done.
<118>Starting syslog...done.
<118>Starting CRON... done.
<118> Starting package Avahi...done.
<118> Starting package pfBlockerNG-devel...done.
<118> Starting /usr/local/etc/rc.d/pfb_dnsbl.sh...done.
<118> Starting /usr/local/etc/rc.d/pfb_filter.sh...done.
<118>pfSense 2.6.0-RELEASE amd64 Mon Jan 31 19:57:53 UTC 2022
<118>Bootup complete


Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address	= 0xc1850f60f9
fault code		= supervisor read data, page not present
instruction pointer	= 0x20:0xffffffff8103a208
stack pointer	        = 0x28:0xfffffe00004c28e0
frame pointer	        = 0x28:0xfffffe00004c29b0
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 0 (if_io_tqg_0)
trap number		= 12
panic: page fault
cpuid = 0
time = 1676515236
KDB: enter: panic
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.3-STABLE RELENG_2_6_0-n226742-1285d6d205f pfSense amd64
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): resolution 640x480
CPU: Intel(R) Celeron(R) CPU  J3160  @ 1.60GHz (1600.04-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x406c4  Family=0x6  Model=0x4c  Stepping=4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
  Structured Extended Features3=0xc000400<MD_CLEAR,IBPB,STIBP>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8166375424 (7788 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <COREv4 COREBOOT>
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0: MADT APIC ID 2 != hw id 1
ioapic0 <Version 2.0> irqs 0-114 on motherboard
Launching APs: 3 2 1
Timecounter "TSC" frequency 1600039940 Hz quality 1000
random: entropy device external interface
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80739000, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff807390b0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80739160, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff807609f0, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80760aa0, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80760b50, 0) error 1
wlan: mac acl policy registered
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0.
module_register_init: MOD_LOAD (vesa, 0xffffffff8140a210, 0) error 19
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd0 at kbdmux0
[ath_hal] loaded
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
000.000056 [4344] netmap_init               netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <COREv4 COREBOOT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: could not evaluate _ADR - AE_NOT_FOUND
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0x90000000-0x90ffffff,0x80000000-0x8fffffff at device 2.0 on pci0
vgapci0: Boot video device
ahci0: <AHCI SATA controller> port 0x5040-0x505f mem 0x91414000-0x914147ff irq 19 at device 19.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
xhci0: <Intel Braswell USB 3.0 controller> mem 0x91400000-0x9140ffff irq 20 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
hdac0: <Intel Braswell HDA Controller> mem 0x91410000-0x91413fff irq 22 at device 27.0 on pci0
pcib1: <PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <PCI bus> on pcib1
igb0: <Intel(R) I211 (Copper)> port 0x1000-0x101f mem 0x91000000-0x9101ffff,0x91020000-0x91023fff irq 16 at device 0.0 on pci1
igb0: NVM V0.6 imgtype1
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 2 RX queues 2 TX queues
igb0: Using MSI-X interrupts with 3 vectors
<6>igb0: Ethernet address: 00:e0:97:1b:ac:ac
<6>igb0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib2: <PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <PCI bus> on pcib2
igb1: <Intel(R) I211 (Copper)> port 0x2000-0x201f mem 0x91100000-0x9111ffff,0x91120000-0x91123fff irq 16 at device 0.0 on pci2
igb1: NVM V0.6 imgtype1
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 2 RX queues 2 TX queues
igb1: Using MSI-X interrupts with 3 vectors
<6>igb1: Ethernet address: 00:e0:97:1b:ac:ad
<6>igb1: netmap queues/slots: TX 2/1024, RX 2/1024
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
igb2: <Intel(R) I211 (Copper)> port 0x3000-0x301f mem 0x91200000-0x9121ffff,0x91220000-0x91223fff irq 16 at device 0.0 on pci3
igb2: NVM V0.6 imgtype1
igb2: Using 1024 TX descriptors and 1024 RX descriptors
igb2: Using 2 RX queues 2 TX queues
igb2: Using MSI-X interrupts with 3 vectors
<6>igb2: Ethernet address: 00:e0:97:1b:ac:ae
<6>igb2: netmap queues/slots: TX 2/1024, RX 2/1024
pcib4: <PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci4: <PCI bus> on pcib4
igb3: <Intel(R) I211 (Copper)> port 0x4000-0x401f mem 0x91300000-0x9131ffff,0x91320000-0x91323fff irq 16 at device 0.0 on pci4
igb3: NVM V0.6 imgtype1
igb3: Using 1024 TX descriptors and 1024 RX descriptors
igb3: Using 2 RX queues 2 TX queues
igb3: Using MSI-X interrupts with 3 vectors
<6>igb3: Ethernet address: 00:e0:97:1b:ac:af
<6>igb3: netmap queues/slots: TX 2/1024, RX 2/1024
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
orm0: <ISA Option ROM> at iomem 0xee800-0xeffff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC897 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC897 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0
pcm1: <Realtek ALC897 (Front Analog)> at nid 27 and 25 on hdaa0
pcm2: <Realtek ALC897 (Rear Digital)> at nid 30 on hdaa0
hdacc1: <Intel Braswell HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Braswell Audio Function Group> at nid 1 on hdacc1
hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (6) in association 1! Disabling association.
hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (7) in association 1! Disabling association.
Trying to mount root from zfs:pfSense/ROOT/default []...
ugen0.1: <0x8086 XHCI root HUB> at usbus0
Root mount waiting for: CAM usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: 13 ports with 13 removable, self powered
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Protectli 120GB mSATA SBFM61.5> ACS-4 ATA SATA 3.x device
ada0: Serial Number 833407270F0800061518
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
<118>Configuring crash dumps...
<118>Using /dev/ada0p2 for dump device.
<118>Filesystems are clean, continuing...
<118>Mounting filesystems...
<118>
<118>        __
<118> _ __  / _|___  ___ _ __  ___  ___
<118>| '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \
<118>| |_) |  _\__ \  __/ | | \__ \  __/
<118>| .__/|_| |___/\___|_| |_|___/\___|
<118>|_|
<118>
<118>
<118>Welcome to pfSense 2.6.0-RELEASE...
<118>
<118>savecore 103 - - reboot after panic: page fault
<118>savecore 103 - - writing core to /var/crash/textdump.tar.1
<118>...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/ipsec /usr/local/lib/perl5/5.32/mach/CORE
<118>32-bit compatibility ldconfig path:
<118>done.
<118>>>> Removing vital flag from php74... done.
<118>External config loader 1.0 is now starting... ada0p1 ada0p3
<118>Launching the init system...Updating CPU Microcode...
CPU: Intel(R) Celeron(R) CPU  J3160  @ 1.60GHz (1600.04-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x406c4  Family=0x6  Model=0x4c  Stepping=4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
  Structured Extended Features3=0xc000400<MD_CLEAR,IBPB,STIBP>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
<118>Done.
<118>.... done.
<118>Initializing.................. done.
<118>Starting device manager (devd)...done.
<118>Loading configuration......done.
<118>Updating configuration...done.
<118>Checking config backups consistency.................................done.
<118>Setting up extended sysctls...done.
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard
WARNING: Device "crypto" is Giant locked and may be deleted before FreeBSD 14.0.
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
<118>Setting timezone...done.
<118>Configuring loopback interface...
<6>lo0: link state changed to UP
<118>done.
<118>Starting syslog...done.
<118>Setting up interfaces microcode...done.
<118>Removed leftover dhcp6c lock file: /tmp/dhcp6c_igb0_lock
<118>Configuring loopback interface...done.
<118>Configuring VLAN interfaces...
<6>vlan0: changing name to 'igb1.10'
<6>vlan1: changing name to 'igb1.107'
<6>vlan2: changing name to 'igb1.20'
<6>vlan3: changing name to 'igb1.30'
<6>vlan4: changing name to 'igb1.40'
<118>done.
<118>Configuring SECURE_LAN interface...done.
<118>Configuring IOT_LAN interface...done.
<118>Configuring RENTAL_LAN interface...done.
<118>Configuring GUEST_LAN interface...done.
<118>Configuring VM_LAN interface...done.
<118>Configuring LAN interface...done.
<118>Configuring WAN interface...
<6>igb0: link state changed to UP
<6>igb1: link state changed to UP
<6>igb1.20: link state changed to UP
<6>igb1.40: link state changed to UP
<6>igb1.10: link state changed to UP
<6>igb1.107: link state changed to UP
<6>igb1.30: link state changed to UP
<118>done.
<118>Configuring CARP settings...done.
<118>Syncing OpenVPN settings...done.
<6>pflog0: promiscuous mode enabled
<118>Configuring firewall.....0 addresses deleted.
<118>.done.
<118>Starting PFLOG...done.
<118>Setting up gateway monitors...done.
<118>Setting up static routes...done.
<118>Setting up DNSs...
<118>Starting DNS Resolver...done.
<118>Synchronizing user settings...done.
<118>Configuring CRON...done.
<118>Bootstrapping clock...done.
<118>Starting NTP Server...done.
<118>Starting webConfigurator...done.
<118>Starting DHCP service...done.
<118>Starting DHCPv6 service...done.
<118>Configuring firewall.....0 addresses deleted.
<118>0 addresses deleted.
<118>.done.
<118>Generating RRD graphs...done.
<118>Starting syslog...done.
<118>Starting CRON... done.
<118> Starting package Avahi...done.
<118> Starting package pfBlockerNG-devel...done.
<118> Starting /usr/local/etc/rc.d/pfb_dnsbl.sh...done.
<118> Starting /usr/local/etc/rc.d/pfb_filter.sh...done.
<118>pfSense 2.6.0-RELEASE amd64 Mon Jan 31 19:57:53 UTC 2022
<118>Bootup complete
<6>pid 98028 (rrdtool), jid 0, uid 0: exited on signal 11 (core dumped)
<6>pid 98982 (rrdtool), jid 0, uid 0: exited on signal 11 (core dumped)
<6>pid 369 (php-fpm), jid 0, uid 0: exited on signal 11 (core dumped)
<6>pid 95736 (php-cgi), jid 0, uid 0: exited on signal 11 (core dumped)
<6>pid 6997 (cron), jid 0, uid 0: exited on signal 11 (core dumped)
panic: vm_fault: fault on nofault entry, addr: 0xfffffe002feb5000
cpuid = 3
time = 1676819403
KDB: enter: panic
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.3-STABLE RELENG_2_6_0-n226742-1285d6d205f pfSense amd64
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): resolution 640x480
CPU: Intel(R) Celeron(R) CPU  J3160  @ 1.60GHz (1600.04-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x406c4  Family=0x6  Model=0x4c  Stepping=4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
  Structured Extended Features3=0xc000400<MD_CLEAR,IBPB,STIBP>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8166375424 (7788 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <COREv4 COREBOOT>
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0: MADT APIC ID 2 != hw id 1
ioapic0 <Version 2.0> irqs 0-114 on motherboard
Launching APs: 2 3 1
Timecounter "TSC" frequency 1600040020 Hz quality 1000
random: entropy device external interface
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80739000, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff807390b0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80739160, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff807609f0, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80760aa0, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80760b50, 0) error 1
wlan: mac acl policy registered
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0.
module_register_init: MOD_LOAD (vesa, 0xffffffff8140a210, 0) error 19
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd0 at kbdmux0
[ath_hal] loaded
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
000.000056 [4344] netmap_init               netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <COREv4 COREBOOT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: could not evaluate _ADR - AE_NOT_FOUND
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0x90000000-0x90ffffff,0x80000000-0x8fffffff at device 2.0 on pci0
vgapci0: Boot video device
ahci0: <AHCI SATA controller> port 0x5040-0x505f mem 0x91414000-0x914147ff irq 19 at device 19.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
xhci0: <Intel Braswell USB 3.0 controller> mem 0x91400000-0x9140ffff irq 20 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
hdac0: <Intel Braswell HDA Controller> mem 0x91410000-0x91413fff irq 22 at device 27.0 on pci0
pcib1: <PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <PCI bus> on pcib1
igb0: <Intel(R) I211 (Copper)> port 0x1000-0x101f mem 0x91000000-0x9101ffff,0x91020000-0x91023fff irq 16 at device 0.0 on pci1
igb0: NVM V0.6 imgtype1
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 2 RX queues 2 TX queues
igb0: Using MSI-X interrupts with 3 vectors
<6>igb0: Ethernet address: 00:e0:97:1b:ac:ac
<6>igb0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib2: <PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <PCI bus> on pcib2
igb1: <Intel(R) I211 (Copper)> port 0x2000-0x201f mem 0x91100000-0x9111ffff,0x91120000-0x91123fff irq 16 at device 0.0 on pci2
igb1: NVM V0.6 imgtype1
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 2 RX queues 2 TX queues
igb1: Using MSI-X interrupts with 3 vectors
<6>igb1: Ethernet address: 00:e0:97:1b:ac:ad
<6>igb1: netmap queues/slots: TX 2/1024, RX 2/1024
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
igb2: <Intel(R) I211 (Copper)> port 0x3000-0x301f mem 0x91200000-0x9121ffff,0x91220000-0x91223fff irq 16 at device 0.0 on pci3
igb2: NVM V0.6 imgtype1
igb2: Using 1024 TX descriptors and 1024 RX descriptors
igb2: Using 2 RX queues 2 TX queues
igb2: Using MSI-X interrupts with 3 vectors
<6>igb2: Ethernet address: 00:e0:97:1b:ac:ae
<6>igb2: netmap queues/slots: TX 2/1024, RX 2/1024
pcib4: <PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci4: <PCI bus> on pcib4
igb3: <Intel(R) I211 (Copper)> port 0x4000-0x401f mem 0x91300000-0x9131ffff,0x91320000-0x91323fff irq 16 at device 0.0 on pci4
igb3: NVM V0.6 imgtype1
igb3: Using 1024 TX descriptors and 1024 RX descriptors
igb3: Using 2 RX queues 2 TX queues
igb3: Using MSI-X interrupts with 3 vectors
<6>igb3: Ethernet address: 00:e0:97:1b:ac:af
<6>igb3: netmap queues/slots: TX 2/1024, RX 2/1024
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
orm0: <ISA Option ROM> at iomem 0xee800-0xeffff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC897 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC897 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0
pcm1: <Realtek ALC897 (Front Analog)> at nid 27 and 25 on hdaa0
pcm2: <Realtek ALC897 (Rear Digital)> at nid 30 on hdaa0
hdacc1: <Intel Braswell HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Braswell Audio Function Group> at nid 1 on hdacc1
hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (6) in association 1! Disabling association.
hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (7) in association 1! Disabling association.
Trying to mount root from zfs:pfSense/ROOT/default []...
ugen0.1: <0x8086 XHCI root HUB> at usbus0
Root mount waiting for: CAM usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: 13 ports with 13 removable, self powered
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Protectli 120GB mSATA SBFM61.5> ACS-4 ATA SATA 3.x device
ada0: Serial Number 833407270F0800061518
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
<118>Configuring crash dumps...
<118>Using /dev/ada0p2 for dump device.
<118>Filesystems are clean, continuing...
<118>Mounting filesystems...
<118>
<118>        __
<118> _ __  / _|___  ___ _ __  ___  ___
<118>| '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \
<118>| |_) |  _\__ \  __/ | | \__ \  __/
<118>| .__/|_| |___/\___|_| |_|___/\___|
<118>|_|
<118>
<118>
<118>Welcome to pfSense 2.6.0-RELEASE...
<118>
<118>savecore 103 - - reboot after panic: vm_fault: fault on nofault entry, addr: 0xfffffe002feb5000
<118>savecore 103 - - writing core to /var/crash/textdump.tar.0
<118>...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/ipsec /usr/local/lib/perl5/5.32/mach/CORE
<118>32-bit compatibility ldconfig path:
<118>done.
<118>>>> Removing vital flag from php74... done.
<118>External config loader 1.0 is now starting... ada0p1 ada0p3
<118>Launching the init system...Updating CPU Microcode...
CPU: Intel(R) Celeron(R) CPU  J3160  @ 1.60GHz (1600.04-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x406c4  Family=0x6  Model=0x4c  Stepping=4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
  Structured Extended Features3=0xc000400<MD_CLEAR,IBPB,STIBP>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
<118>Done.
<118>.... done.
<118>Initializing.................. done.
<118>Starting device manager (devd)...done.
<118>Loading configuration......done.
<118>Updating configuration...done.
<118>Checking config backups consistency.................................done.
<118>Setting up extended sysctls...done.
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard
WARNING: Device "crypto" is Giant locked and may be deleted before FreeBSD 14.0.
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
<118>Setting timezone...done.
<118>Configuring loopback interface...
<6>lo0: link state changed to UP
<118>done.
<118>Starting syslog...done.
<118>Setting up interfaces microcode...done.
<118>Removed leftover dhcp6c lock file: /tmp/dhcp6c_igb0_lock
<118>Configuring loopback interface...done.
<118>Configuring VLAN interfaces...
<6>vlan0: changing name to 'igb1.10'
<6>vlan1: changing name to 'igb1.107'
<6>vlan2: changing name to 'igb1.20'
<6>vlan3: changing name to 'igb1.30'
<6>vlan4: changing name to 'igb1.40'
<118>done.
<118>Configuring SECURE_LAN interface...done.
<118>Configuring IOT_LAN interface...done.
<118>Configuring RENTAL_LAN interface...done.
<118>Configuring GUEST_LAN interface...done.
<118>Configuring VM_LAN interface...done.
<118>Configuring LAN interface...done.
<118>Configuring WAN interface...
<6>igb1: link state changed to UP
<6>igb1.20: link state changed to UP
<6>igb1.40: link state changed to UP
<6>igb1.10: link state changed to UP
<6>igb1.107: link state changed to UP
<6>igb1.30: link state changed to UP
<6>igb0: link state changed to UP
<118>done.
<118>Configuring CARP settings...done.
<118>Syncing OpenVPN settings...done.
<6>pflog0: promiscuous mode enabled
<118>Configuring firewall.....0 addresses deleted.
<118>.done.
<118>Starting PFLOG...done.
<118>Setting up gateway monitors...done.
<118>Setting up static routes...done.
<118>Setting up DNSs...
<118>Starting DNS Resolver...done.
<118>Synchronizing user settings...done.
<118>Configuring CRON...done.
<118>Bootstrapping clock...done.
<118>Starting NTP Server...done.
<118>Starting webConfigurator...done.
<118>Starting DHCP service...done.
<118>Starting DHCPv6 service...done.
<118>Configuring firewall.....0 addresses deleted.
<118>0 addresses deleted.
<118>.done.
<118>Generating RRD graphs...done.
<118>Starting syslog...done.
<118>Starting CRON... done.
<118> Starting package Avahi...done.
<118> Starting package pfBlockerNG-devel...done.
<118> Starting /usr/local/etc/rc.d/pfb_dnsbl.sh...done.
<118> Starting /usr/local/etc/rc.d/pfb_filter.sh...done.
<118>pfSense 2.6.0-RELEASE amd64 Mon Jan 31 19:57:53 UTC 2022
<118>Bootup complete
<6>pid 136 (unbound), jid 0, uid 59: exited on signal 10
<6>igb0: link state changed to DOWN
<7>cannot forward src fe80:2::72a7:41ff:fe72:2e67, dst 2600:4040:2183:dc00:2e0:97ff:fe1b:acad, nxt 58, rcvif igb1, outif igb0
<6>igb0: link state changed to UP
<6>igb0: link state changed to DOWN
<6>igb0: link state changed to UP
<6>igb0: link state changed to DOWN
<6>igb0: link state changed to UP
<6>igb0: link state changed to DOWN
<6>igb0: link state changed to UP
<6>igb0: link state changed to DOWN
<6>igb0: link state changed to UP
<6>igb0: link state changed to DOWN
<6>igb0: link state changed to UP
<6>pid 13876 (unbound), jid 0, uid 59: exited on signal 10
<6>igb0: link state changed to DOWN
<6>igb0: link state changed to UP
<6>igb0: link state changed to DOWN
<7>cannot forward src fe80:2::72a7:41ff:fe72:2e67, dst 2600:4040:2184:b00:2e0:97ff:fe1b:acad, nxt 58, rcvif igb1, outif igb0
<6>igb0: link state changed to UP
<6>igb0: link state changed to DOWN
<6>igb0: link state changed to UP
<6>igb0: link state changed to DOWN
<6>igb0: link state changed to UP
<6>pid 66562 (unbound), jid 0, uid 59: exited on signal 10
<6>igb0: link state changed to DOWN
<6>igb0: link state changed to UP
<7>cannot forward src fe80:2::72a7:41ff:fe72:2e67, dst 2600:4040:2185:bc00:2e0:97ff:fe1b:acad, nxt 58, rcvif igb1, outif igb0
<6>igb0: link state changed to DOWN
<6>igb0: link state changed to UP
<6>igb0: link state changed to DOWN
<6>igb0: link state changed to UP
<6>igb0: link state changed to DOWN
<6>igb0: link state changed to UP
<6>igb0: link state changed to DOWN
<6>igb0: link state changed to UP
<6>igb0: link state changed to DOWN
<6>igb0: link state changed to UP
<6>pid 182 (unbound), jid 0, uid 59: exited on signal 10
<6>igb0: link state changed to DOWN
<6>igb0: link state changed to UP
<7>cannot forward src fe80:2::72a7:41ff:fe72:2e67, dst 2600:4040:2185:bc00:2e0:97ff:fe1b:acad, nxt 58, rcvif igb1, outif igb0
<6>igb0: link state changed to DOWN
<6>igb0: link state changed to UP
<6>igb0: link state changed to DOWN
<6>igb0: link state changed to UP
<6>igb0: link state changed to DOWN
<6>igb0: link state changed to UP
<6>igb0: link state changed to DOWN
<6>igb0: link state changed to UP
<6>igb0: link state changed to DOWN
<6>igb0: link state changed to UP
<6>igb0: link state changed to DOWN
<6>igb0: link state changed to UP
<6>igb0: link state changed to DOWN
<6>igb0: link state changed to UP


Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 02
fault virtual address	= 0x8043c1010
fault code		= supervisor write data, page not present
instruction pointer	= 0x20:0xffffffff81375e86
stack pointer	        = 0x28:0xfffffe004bace850
frame pointer	        = 0x28:0xfffffe004bace8f0
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 23 (dom0)
trap number		= 12
panic: page fault
cpuid = 1
time = 1677168347
KDB: enter: panic
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.3-STABLE RELENG_2_6_0-n226742-1285d6d205f pfSense amd64
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): resolution 640x480
CPU: Intel(R) Celeron(R) CPU  J3160  @ 1.60GHz (1600.04-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x406c4  Family=0x6  Model=0x4c  Stepping=4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
  Structured Extended Features3=0xc000400<MD_CLEAR,IBPB,STIBP>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8166375424 (7788 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <COREv4 COREBOOT>
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0: MADT APIC ID 2 != hw id 1
ioapic0 <Version 2.0> irqs 0-114 on motherboard
Launching APs: 2 3 1
Timecounter "TSC" frequency 1600039880 Hz quality 1000
random: entropy device external interface
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80739000, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff807390b0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80739160, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff807609f0, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80760aa0, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80760b50, 0) error 1
wlan: mac acl policy registered
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0.
module_register_init: MOD_LOAD (vesa, 0xffffffff8140a210, 0) error 19
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd0 at kbdmux0
[ath_hal] loaded
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
000.000056 [4344] netmap_init               netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <COREv4 COREBOOT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: could not evaluate _ADR - AE_NOT_FOUND
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0x90000000-0x90ffffff,0x80000000-0x8fffffff at device 2.0 on pci0
vgapci0: Boot video device
ahci0: <AHCI SATA controller> port 0x5040-0x505f mem 0x91414000-0x914147ff irq 19 at device 19.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
xhci0: <Intel Braswell USB 3.0 controller> mem 0x91400000-0x9140ffff irq 20 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
hdac0: <Intel Braswell HDA Controller> mem 0x91410000-0x91413fff irq 22 at device 27.0 on pci0
pcib1: <PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <PCI bus> on pcib1
igb0: <Intel(R) I211 (Copper)> port 0x1000-0x101f mem 0x91000000-0x9101ffff,0x91020000-0x91023fff irq 16 at device 0.0 on pci1
igb0: NVM V0.6 imgtype1
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 2 RX queues 2 TX queues
igb0: Using MSI-X interrupts with 3 vectors
<6>igb0: Ethernet address: 00:e0:97:1b:ac:ac
<6>igb0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib2: <PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <PCI bus> on pcib2
igb1: <Intel(R) I211 (Copper)> port 0x2000-0x201f mem 0x91100000-0x9111ffff,0x91120000-0x91123fff irq 16 at device 0.0 on pci2
igb1: NVM V0.6 imgtype1
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 2 RX queues 2 TX queues
igb1: Using MSI-X interrupts with 3 vectors
<6>igb1: Ethernet address: 00:e0:97:1b:ac:ad
<6>igb1: netmap queues/slots: TX 2/1024, RX 2/1024
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
igb2: <Intel(R) I211 (Copper)> port 0x3000-0x301f mem 0x91200000-0x9121ffff,0x91220000-0x91223fff irq 16 at device 0.0 on pci3
igb2: NVM V0.6 imgtype1
igb2: Using 1024 TX descriptors and 1024 RX descriptors
igb2: Using 2 RX queues 2 TX queues
igb2: Using MSI-X interrupts with 3 vectors
<6>igb2: Ethernet address: 00:e0:97:1b:ac:ae
<6>igb2: netmap queues/slots: TX 2/1024, RX 2/1024
pcib4: <PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci4: <PCI bus> on pcib4
igb3: <Intel(R) I211 (Copper)> port 0x4000-0x401f mem 0x91300000-0x9131ffff,0x91320000-0x91323fff irq 16 at device 0.0 on pci4
igb3: NVM V0.6 imgtype1
igb3: Using 1024 TX descriptors and 1024 RX descriptors
igb3: Using 2 RX queues 2 TX queues
igb3: Using MSI-X interrupts with 3 vectors
<6>igb3: Ethernet address: 00:e0:97:1b:ac:af
<6>igb3: netmap queues/slots: TX 2/1024, RX 2/1024
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
orm0: <ISA Option ROM> at iomem 0xee800-0xeffff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC897 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC897 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0
pcm1: <Realtek ALC897 (Front Analog)> at nid 27 and 25 on hdaa0
pcm2: <Realtek ALC897 (Rear Digital)> at nid 30 on hdaa0
hdacc1: <Intel Braswell HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Braswell Audio Function Group> at nid 1 on hdacc1
hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (6) in association 1! Disabling association.
hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (7) in association 1! Disabling association.
Trying to mount root from zfs:pfSense/ROOT/default []...
ugen0.1: <0x8086 XHCI root HUB> at usbus0
Root mount waiting for:uhub0:  CAM usbus0
<0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: 13 ports with 13 removable, self powered
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Protectli 120GB mSATA SBFM61.5> ACS-4 ATA SATA 3.x device
ada0: Serial Number 833407270F0800061518
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
<118>Configuring crash dumps...
<118>Using /dev/ada0p2 for dump device.
<118>Filesystems are clean, continuing...
<118>Mounting filesystems...
<118>
<118>        __
<118> _ __  / _|___  ___ _ __  ___  ___
<118>| '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \
<118>| |_) |  _\__ \  __/ | | \__ \  __/
<118>| .__/|_| |___/\___|_| |_|___/\___|
<118>|_|
<118>
<118>
<118>Welcome to pfSense 2.6.0-RELEASE...
<118>
<118>savecore 103 - - reboot after panic: page fault
<118>savecore 103 - - writing core to /var/crash/textdump.tar.0
<118>...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/ipsec /usr/local/lib/perl5/5.32/mach/CORE
<118>32-bit compatibility ldconfig path:
<118>done.
<118>>>> Removing vital flag from php74... done.
<118>External config loader 1.0 is now starting... ada0p1 ada0p3
<118>Launching the init system...Updating CPU Microcode...
CPU: Intel(R) Celeron(R) CPU  J3160  @ 1.60GHz (1600.04-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x406c4  Family=0x6  Model=0x4c  Stepping=4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
  Structured Extended Features3=0xc000400<MD_CLEAR,IBPB,STIBP>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
<118>Done.
<118>.... done.
<118>Initializing.................. done.
<118>Starting device manager (devd)...done.
<118>Loading configuration......done.
<118>Updating configuration...done.
<118>Checking config backups consistency.................................done.
<118>Setting up extended sysctls...done.
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard
WARNING: Device "crypto" is Giant locked and may be deleted before FreeBSD 14.0.
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
<118>Setting timezone...done.
<118>Configuring loopback interface...
<6>lo0: link state changed to UP
<118>done.
<118>Starting syslog...done.
<118>Setting up interfaces microcode...done.
<118>Removed leftover dhcp6c lock file: /tmp/dhcp6c_igb0_lock
<118>Configuring loopback interface...done.
<118>Configuring VLAN interfaces...
<6>vlan0: changing name to 'igb1.10'
<6>vlan1: changing name to 'igb1.107'
<6>vlan2: changing name to 'igb1.20'
<6>vlan3: changing name to 'igb1.30'
<6>vlan4: changing name to 'igb1.40'
<118>done.
<118>Configuring SECURE_LAN interface...done.
<118>Configuring IOT_LAN interface...done.
<118>Configuring RENTAL_LAN interface...done.
<118>Configuring GUEST_LAN interface...done.
<118>Configuring VM_LAN interface...done.
<118>Configuring LAN interface...done.
<118>Configuring WAN interface...
<6>igb1: link state changed to UP
<6>igb1.20: link state changed to UP
<6>igb1.40: link state changed to UP
<6>igb1.10: link state changed to UP
<6>igb1.107: link state changed to UP
<6>igb1.30: link state changed to UP
<6>igb0: link state changed to UP
<118>done.
<118>Configuring CARP settings...done.
<118>Syncing OpenVPN settings...done.
<6>pflog0: promiscuous mode enabled
<118>Configuring firewall.....0 addresses deleted.
<118>.done.
<118>Starting PFLOG...done.
<118>Setting up gateway monitors...done.
<118>Setting up static routes...done.
<118>Setting up DNSs...
<118>Starting DNS Resolver...done.
<118>Synchronizing user settings...done.
<118>Configuring CRON...done.
<118>Bootstrapping clock...done.
<118>Starting NTP Server...done.
<118>Starting webConfigurator...done.
<118>Starting DHCP service...done.
<118>Starting DHCPv6 service...done.
<118>Configuring firewall.....0 addresses deleted.
<118>0 addresses deleted.
<118>.done.
<118>Generating RRD graphs...done.
<118>Starting syslog...done.
<118>Starting CRON... done.
<118> Starting package Avahi...done.
<118> Starting package pfBlockerNG-devel...done.
<118> Starting /usr/local/etc/rc.d/pfb_dnsbl.sh...done.
<118> Starting /usr/local/etc/rc.d/pfb_filter.sh...done.
<118>pfSense 2.6.0-RELEASE amd64 Mon Jan 31 19:57:53 UTC 2022
<118>Bootup complete


Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address	= 0xc1850f60f9
fault code		= supervisor read data, page not present
instruction pointer	= 0x20:0xffffffff8103a208
stack pointer	        = 0x28:0xfffffe00004c28e0
frame pointer	        = 0x28:0xfffffe00004c29b0
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 0 (if_io_tqg_0)
trap number		= 12
panic: page fault
cpuid = 0
time = 1677283859
KDB: enter: panic
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.3-STABLE RELENG_2_6_0-n226742-1285d6d205f pfSense amd64
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): resolution 640x480
CPU: Intel(R) Celeron(R) CPU  J3160  @ 1.60GHz (1600.04-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x406c4  Family=0x6  Model=0x4c  Stepping=4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
  Structured Extended Features3=0xc000400<MD_CLEAR,IBPB,STIBP>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8166375424 (7788 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <COREv4 COREBOOT>
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0: MADT APIC ID 2 != hw id 1
ioapic0 <Version 2.0> irqs 0-114 on motherboard
Launching APs: 2 3 1
Timecounter "TSC" frequency 1600039820 Hz quality 1000
random: entropy device external interface
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80739000, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff807390b0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80739160, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff807609f0, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80760aa0, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80760b50, 0) error 1
wlan: mac acl policy registered
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0.
module_register_init: MOD_LOAD (vesa, 0xffffffff8140a210, 0) error 19
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd0 at kbdmux0
[ath_hal] loaded
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
000.000056 [4344] netmap_init               netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <COREv4 COREBOOT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: could not evaluate _ADR - AE_NOT_FOUND
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0x90000000-0x90ffffff,0x80000000-0x8fffffff at device 2.0 on pci0
vgapci0: Boot video device
ahci0: <AHCI SATA controller> port 0x5040-0x505f mem 0x91414000-0x914147ff irq 19 at device 19.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
xhci0: <Intel Braswell USB 3.0 controller> mem 0x91400000-0x9140ffff irq 20 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
hdac0: <Intel Braswell HDA Controller> mem 0x91410000-0x91413fff irq 22 at device 27.0 on pci0
pcib1: <PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <PCI bus> on pcib1
igb0: <Intel(R) I211 (Copper)> port 0x1000-0x101f mem 0x91000000-0x9101ffff,0x91020000-0x91023fff irq 16 at device 0.0 on pci1
igb0: NVM V0.6 imgtype1
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 2 RX queues 2 TX queues
igb0: Using MSI-X interrupts with 3 vectors
<6>igb0: Ethernet address: 00:e0:97:1b:ac:ac
<6>igb0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib2: <PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <PCI bus> on pcib2
igb1: <Intel(R) I211 (Copper)> port 0x2000-0x201f mem 0x91100000-0x9111ffff,0x91120000-0x91123fff irq 16 at device 0.0 on pci2
igb1: NVM V0.6 imgtype1
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 2 RX queues 2 TX queues
igb1: Using MSI-X interrupts with 3 vectors
<6>igb1: Ethernet address: 00:e0:97:1b:ac:ad
<6>igb1: netmap queues/slots: TX 2/1024, RX 2/1024
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
igb2: <Intel(R) I211 (Copper)> port 0x3000-0x301f mem 0x91200000-0x9121ffff,0x91220000-0x91223fff irq 16 at device 0.0 on pci3
igb2: NVM V0.6 imgtype1
igb2: Using 1024 TX descriptors and 1024 RX descriptors
igb2: Using 2 RX queues 2 TX queues
igb2: Using MSI-X interrupts with 3 vectors
<6>igb2: Ethernet address: 00:e0:97:1b:ac:ae
<6>igb2: netmap queues/slots: TX 2/1024, RX 2/1024
pcib4: <PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci4: <PCI bus> on pcib4
igb3: <Intel(R) I211 (Copper)> port 0x4000-0x401f mem 0x91300000-0x9131ffff,0x91320000-0x91323fff irq 16 at device 0.0 on pci4
igb3: NVM V0.6 imgtype1
igb3: Using 1024 TX descriptors and 1024 RX descriptors
igb3: Using 2 RX queues 2 TX queues
igb3: Using MSI-X interrupts with 3 vectors
<6>igb3: Ethernet address: 00:e0:97:1b:ac:af
<6>igb3: netmap queues/slots: TX 2/1024, RX 2/1024
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
orm0: <ISA Option ROM> at iomem 0xee800-0xeffff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC897 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC897 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0
pcm1: <Realtek ALC897 (Front Analog)> at nid 27 and 25 on hdaa0
pcm2: <Realtek ALC897 (Rear Digital)> at nid 30 on hdaa0
hdacc1: <Intel Braswell HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Braswell Audio Function Group> at nid 1 on hdacc1
hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (6) in association 1! Disabling association.
hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (7) in association 1! Disabling association.
Trying to mount root from zfs:pfSense/ROOT/default []...
ugen0.1: <0x8086 XHCI root HUB> at usbus0
Root mount waiting for:uhub0:  CAM usbus0
<0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: 13 ports with 13 removable, self powered
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Protectli 120GB mSATA SBFM61.5> ACS-4 ATA SATA 3.x device
ada0: Serial Number 833407270F0800061518
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
<118>Configuring crash dumps...
<118>Using /dev/ada0p2 for dump device.
<118>Filesystems are clean, continuing...
<118>Mounting filesystems...
<118>
<118>        __
<118> _ __  / _|___  ___ _ __  ___  ___
<118>| '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \
<118>| |_) |  _\__ \  __/ | | \__ \  __/
<118>| .__/|_| |___/\___|_| |_|___/\___|
<118>|_|
<118>
<118>
<118>Welcome to pfSense 2.6.0-RELEASE...
<118>
<118>savecore 103 - - reboot after panic: page fault
<118>savecore 103 - - writing core to /var/crash/textdump.tar.0
<118>...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/ipsec /usr/local/lib/perl5/5.32/mach/CORE
<118>32-bit compatibility ldconfig path:
<118>done.
<118>>>> Removing vital flag from php74... done.
<118>External config loader 1.0 is now starting... ada0p1 ada0p3
<118>Launching the init system...Updating CPU Microcode...
CPU: Intel(R) Celeron(R) CPU  J3160  @ 1.60GHz (1600.04-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x406c4  Family=0x6  Model=0x4c  Stepping=4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
  Structured Extended Features3=0xc000400<MD_CLEAR,IBPB,STIBP>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
<118>Done.
<118>.... done.
<118>Initializing.................. done.
<118>Starting device manager (devd)...done.
<118>Loading configuration......done.
<118>Updating configuration...done.
<118>Checking config backups consistency.................................done.
<118>Setting up extended sysctls...done.
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard
WARNING: Device "crypto" is Giant locked and may be deleted before FreeBSD 14.0.
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
<118>Setting timezone...done.
<118>Configuring loopback interface...
<6>lo0: link state changed to UP
<118>done.
<118>Starting syslog...done.
<118>Setting up interfaces microcode...done.
<118>Removed leftover dhcp6c lock file: /tmp/dhcp6c_igb0_lock
<118>Configuring loopback interface...done.
<118>Configuring VLAN interfaces...
<6>vlan0: changing name to 'igb1.10'
<6>vlan1: changing name to 'igb1.107'
<6>vlan2: changing name to 'igb1.20'
<6>vlan3: changing name to 'igb1.30'
<6>vlan4: changing name to 'igb1.40'
<118>done.
<118>Configuring SECURE_LAN interface...done.
<118>Configuring IOT_LAN interface...done.
<118>Configuring RENTAL_LAN interface...done.
<118>Configuring GUEST_LAN interface...done.
<118>Configuring VM_LAN interface...done.
<118>Configuring LAN interface...done.
<118>Configuring WAN interface...
<6>igb0: link state changed to UP
<6>igb1: link state changed to UP
<6>igb1.20: link state changed to UP
<6>igb1.40: link state changed to UP
<6>igb1.10: link state changed to UP
<6>igb1.107: link state changed to UP
<6>igb1.30: link state changed to UP
<118>done.
<118>Configuring CARP settings...done.
<118>Syncing OpenVPN settings...done.
<6>pflog0: promiscuous mode enabled
<118>Configuring firewall.....0 addresses deleted.
<118>.done.
<118>Starting PFLOG...done.
<118>Setting up gateway monitors...done.
<118>Setting up static routes...done.
<118>Setting up DNSs...
<118>Starting DNS Resolver...done.
<118>Synchronizing user settings...done.
<118>Configuring CRON...done.
<118>Bootstrapping clock...done.
<118>Starting NTP Server...done.
<118>Starting webConfigurator...done.
<118>Starting DHCP service...done.
<118>Starting DHCPv6 service...done.
<118>Configuring firewall.....0 addresses deleted.
<118>0 addresses deleted.
<118>.done.
<118>Generating RRD graphs...done.
<118>Starting syslog...done.
<118>Starting CRON... done.
<118> Starting package Avahi...done.
<118> Starting package pfBlockerNG-devel...done.
<118> Starting /usr/local/etc/rc.d/pfb_dnsbl.sh...done.
<118> Starting /usr/local/etc/rc.d/pfb_filter.sh...done.
<118>pfSense 2.6.0-RELEASE amd64 Mon Jan 31 19:57:53 UTC 2022
<118>Bootup complete


Fatal trap 1: privileged instruction fault while in kernel mode
cpuid = 3; apic id = 06
instruction pointer	= 0x20:0xffffffff80d296c8
stack pointer	        = 0x28:0xfffffe004e73fca0
frame pointer	        = 0x28:0xfffffe004e73fcb0
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 19 (trim pfSense)
trap number		= 1
panic: privileged instruction fault
cpuid = 3
time = 1677337437
KDB: enter: panic
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.3-STABLE RELENG_2_6_0-n226742-1285d6d205f pfSense amd64
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): resolution 640x480
CPU: Intel(R) Celeron(R) CPU  J3160  @ 1.60GHz (1600.04-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x406c4  Family=0x6  Model=0x4c  Stepping=4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
  Structured Extended Features3=0xc000400<MD_CLEAR,IBPB,STIBP>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8166375424 (7788 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <COREv4 COREBOOT>
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0: MADT APIC ID 2 != hw id 1
ioapic0 <Version 2.0> irqs 0-114 on motherboard
Launching APs: 2 3 1
Timecounter "TSC" frequency 1600039900 Hz quality 1000
random: entropy device external interface
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80739000, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff807390b0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80739160, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff807609f0, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80760aa0, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80760b50, 0) error 1
wlan: mac acl policy registered
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0.
module_register_init: MOD_LOAD (vesa, 0xffffffff8140a210, 0) error 19
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd0 at kbdmux0
[ath_hal] loaded
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
000.000056 [4344] netmap_init               netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <COREv4 COREBOOT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: could not evaluate _ADR - AE_NOT_FOUND
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0x90000000-0x90ffffff,0x80000000-0x8fffffff at device 2.0 on pci0
vgapci0: Boot video device
ahci0: <AHCI SATA controller> port 0x5040-0x505f mem 0x91414000-0x914147ff irq 19 at device 19.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
xhci0: <Intel Braswell USB 3.0 controller> mem 0x91400000-0x9140ffff irq 20 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
hdac0: <Intel Braswell HDA Controller> mem 0x91410000-0x91413fff irq 22 at device 27.0 on pci0
pcib1: <PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <PCI bus> on pcib1
igb0: <Intel(R) I211 (Copper)> port 0x1000-0x101f mem 0x91000000-0x9101ffff,0x91020000-0x91023fff irq 16 at device 0.0 on pci1
igb0: NVM V0.6 imgtype1
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 2 RX queues 2 TX queues
igb0: Using MSI-X interrupts with 3 vectors
<6>igb0: Ethernet address: 00:e0:97:1b:ac:ac
<6>igb0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib2: <PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <PCI bus> on pcib2
igb1: <Intel(R) I211 (Copper)> port 0x2000-0x201f mem 0x91100000-0x9111ffff,0x91120000-0x91123fff irq 16 at device 0.0 on pci2
igb1: NVM V0.6 imgtype1
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 2 RX queues 2 TX queues
igb1: Using MSI-X interrupts with 3 vectors
<6>igb1: Ethernet address: 00:e0:97:1b:ac:ad
<6>igb1: netmap queues/slots: TX 2/1024, RX 2/1024
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
igb2: <Intel(R) I211 (Copper)> port 0x3000-0x301f mem 0x91200000-0x9121ffff,0x91220000-0x91223fff irq 16 at device 0.0 on pci3
igb2: NVM V0.6 imgtype1
igb2: Using 1024 TX descriptors and 1024 RX descriptors
igb2: Using 2 RX queues 2 TX queues
igb2: Using MSI-X interrupts with 3 vectors
<6>igb2: Ethernet address: 00:e0:97:1b:ac:ae
<6>igb2: netmap queues/slots: TX 2/1024, RX 2/1024
pcib4: <PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci4: <PCI bus> on pcib4
igb3: <Intel(R) I211 (Copper)> port 0x4000-0x401f mem 0x91300000-0x9131ffff,0x91320000-0x91323fff irq 16 at device 0.0 on pci4
igb3: NVM V0.6 imgtype1
igb3: Using 1024 TX descriptors and 1024 RX descriptors
igb3: Using 2 RX queues 2 TX queues
igb3: Using MSI-X interrupts with 3 vectors
<6>igb3: Ethernet address: 00:e0:97:1b:ac:af
<6>igb3: netmap queues/slots: TX 2/1024, RX 2/1024
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
orm0: <ISA Option ROM> at iomem 0xee800-0xeffff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC897 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC897 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0
pcm1: <Realtek ALC897 (Front Analog)> at nid 27 and 25 on hdaa0
pcm2: <Realtek ALC897 (Rear Digital)> at nid 30 on hdaa0
hdacc1: <Intel Braswell HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Braswell Audio Function Group> at nid 1 on hdacc1
hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (6) in association 1! Disabling association.
hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (7) in association 1! Disabling association.
Trying to mount root from zfs:pfSense/ROOT/default []...
ugen0.1: <0x8086 XHCI root HUB> at usbus0
Root mount waiting for: CAM usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: 13 ports with 13 removable, self powered
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Protectli 120GB mSATA SBFM61.5> ACS-4 ATA SATA 3.x device
ada0: Serial Number 833407270F0800061518
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
<118>Configuring crash dumps...
<118>Using /dev/ada0p2 for dump device.
<118>Filesystems are clean, continuing...
<118>Mounting filesystems...
<118>
<118>        __
<118> _ __  / _|___  ___ _ __  ___  ___
<118>| '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \
<118>| |_) |  _\__ \  __/ | | \__ \  __/
<118>| .__/|_| |___/\___|_| |_|___/\___|
<118>|_|
<118>
<118>
<118>Welcome to pfSense 2.6.0-RELEASE...
<118>
<118>savecore 103 - - reboot after panic: privileged instruction fault
<118>savecore 103 - - writing core to /var/crash/textdump.tar.1
<118>...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/ipsec /usr/local/lib/perl5/5.32/mach/CORE
<118>32-bit compatibility ldconfig path:
<118>done.
<118>>>> Removing vital flag from php74... done.
<118>External config loader 1.0 is now starting... ada0p1 ada0p3
<118>Launching the init system...Updating CPU Microcode...
CPU: Intel(R) Celeron(R) CPU  J3160  @ 1.60GHz (1600.04-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x406c4  Family=0x6  Model=0x4c  Stepping=4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
  Structured Extended Features3=0xc000400<MD_CLEAR,IBPB,STIBP>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
<118>Done.
<118>.... done.
<118>Initializing.................. done.
<118>Starting device manager (devd)...done.
<118>Loading configuration......done.
<118>Updating configuration...done.
<118>Checking config backups consistency.................................done.
<118>Setting up extended sysctls...done.
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard
WARNING: Device "crypto" is Giant locked and may be deleted before FreeBSD 14.0.
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
<118>Setting timezone...done.
<118>Configuring loopback interface...
<6>lo0: link state changed to UP
<118>done.
<118>Starting syslog...done.
<118>Setting up interfaces microcode...done.
<118>Removed leftover dhcp6c lock file: /tmp/dhcp6c_igb0_lock
<118>Configuring loopback interface...done.
<118>Configuring VLAN interfaces...
<6>vlan0: changing name to 'igb1.10'
<6>vlan1: changing name to 'igb1.107'
<6>vlan2: changing name to 'igb1.20'
<6>vlan3: changing name to 'igb1.30'
<6>vlan4: changing name to 'igb1.40'
<118>done.
<118>Configuring SECURE_LAN interface...done.
<118>Configuring IOT_LAN interface...done.
<118>Configuring RENTAL_LAN interface...done.
<118>Configuring GUEST_LAN interface...done.
<118>Configuring VM_LAN interface...done.
<118>Configuring LAN interface...done.
<118>Configuring WAN interface...
<6>igb1: link state changed to UP
<6>igb1.20: link state changed to UP
<6>igb1.40: link state changed to UP
<6>igb1.10: link state changed to UP
<6>igb1.107: link state changed to UP
<6>igb1.30: link state changed to UP
<6>igb0: link state changed to UP
<118>done.
<118>Configuring CARP settings...done.
<118>Syncing OpenVPN settings...done.
<6>pflog0: promiscuous mode enabled
<118>Configuring firewall.....0 addresses deleted.
<118>.done.
<118>Starting PFLOG...done.
<118>Setting up gateway monitors...done.
<118>Setting up static routes...done.
<118>Setting up DNSs...
<118>Starting DNS Resolver...done.
<118>Synchronizing user settings...done.
<118>Configuring CRON...done.
<118>Bootstrapping clock...done.
<118>Starting NTP Server...done.
<118>Starting webConfigurator...done.
<118>Starting DHCP service...done.
<118>Starting DHCPv6 service...done.
<118>Configuring firewall.....0 addresses deleted.
<118>0 addresses deleted.
<118>.done.
<118>Generating RRD graphs...done.
<118>Starting syslog...done.
<118>Starting CRON... done.
<118> Starting package Avahi...done.
<118> Starting package pfBlockerNG-devel...done.
<118> Starting /usr/local/etc/rc.d/pfb_dnsbl.sh...done.
<118> Starting /usr/local/etc/rc.d/pfb_filter.sh...done.
<118>pfSense 2.6.0-RELEASE amd64 Mon Jan 31 19:57:53 UTC 2022
<118>Bootup complete


Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 02
fault virtual address	= 0xc1850f60f9
fault code		= supervisor read data, page not present
instruction pointer	= 0x20:0xffffffff8103a208
stack pointer	        = 0x28:0xfffffe00004c78e0
frame pointer	        = 0x28:0xfffffe00004c79b0
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 0 (if_io_tqg_1)
trap number		= 12
panic: page fault
cpuid = 1
time = 1677354068
KDB: enter: panic
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.3-STABLE RELENG_2_6_0-n226742-1285d6d205f pfSense amd64
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): resolution 640x480
CPU: Intel(R) Celeron(R) CPU  J3160  @ 1.60GHz (1600.04-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x406c4  Family=0x6  Model=0x4c  Stepping=4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
  Structured Extended Features3=0xc000400<MD_CLEAR,IBPB,STIBP>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8166375424 (7788 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <COREv4 COREBOOT>
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0: MADT APIC ID 2 != hw id 1
ioapic0 <Version 2.0> irqs 0-114 on motherboard
Launching APs: 3 2 1
Timecounter "TSC" frequency 1600039940 Hz quality 1000
random: entropy device external interface
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80739000, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff807390b0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80739160, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff807609f0, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80760aa0, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80760b50, 0) error 1
wlan: mac acl policy registered
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0.
module_register_init: MOD_LOAD (vesa, 0xffffffff8140a210, 0) error 19
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd0 at kbdmux0
[ath_hal] loaded
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
000.000056 [4344] netmap_init               netmap: loaded module
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <COREv4 COREBOOT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: could not evaluate _ADR - AE_NOT_FOUND
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0x90000000-0x90ffffff,0x80000000-0x8fffffff at device 2.0 on pci0
vgapci0: Boot video device
ahci0: <AHCI SATA controller> port 0x5040-0x505f mem 0x91414000-0x914147ff irq 19 at device 19.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
xhci0: <Intel Braswell USB 3.0 controller> mem 0x91400000-0x9140ffff irq 20 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
hdac0: <Intel Braswell HDA Controller> mem 0x91410000-0x91413fff irq 22 at device 27.0 on pci0
pcib1: <PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <PCI bus> on pcib1
igb0: <Intel(R) I211 (Copper)> port 0x1000-0x101f mem 0x91000000-0x9101ffff,0x91020000-0x91023fff irq 16 at device 0.0 on pci1
igb0: NVM V0.6 imgtype1
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 2 RX queues 2 TX queues
igb0: Using MSI-X interrupts with 3 vectors
<6>igb0: Ethernet address: 00:e0:97:1b:ac:ac
<6>igb0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib2: <PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <PCI bus> on pcib2
igb1: <Intel(R) I211 (Copper)> port 0x2000-0x201f mem 0x91100000-0x9111ffff,0x91120000-0x91123fff irq 16 at device 0.0 on pci2
igb1: NVM V0.6 imgtype1
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 2 RX queues 2 TX queues
igb1: Using MSI-X interrupts with 3 vectors
<6>igb1: Ethernet address: 00:e0:97:1b:ac:ad
<6>igb1: netmap queues/slots: TX 2/1024, RX 2/1024
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
igb2: <Intel(R) I211 (Copper)> port 0x3000-0x301f mem 0x91200000-0x9121ffff,0x91220000-0x91223fff irq 16 at device 0.0 on pci3
igb2: NVM V0.6 imgtype1
igb2: Using 1024 TX descriptors and 1024 RX descriptors
igb2: Using 2 RX queues 2 TX queues
igb2: Using MSI-X interrupts with 3 vectors
<6>igb2: Ethernet address: 00:e0:97:1b:ac:ae
<6>igb2: netmap queues/slots: TX 2/1024, RX 2/1024
pcib4: <PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci4: <PCI bus> on pcib4
igb3: <Intel(R) I211 (Copper)> port 0x4000-0x401f mem 0x91300000-0x9131ffff,0x91320000-0x91323fff irq 16 at device 0.0 on pci4
igb3: NVM V0.6 imgtype1
igb3: Using 1024 TX descriptors and 1024 RX descriptors
igb3: Using 2 RX queues 2 TX queues
igb3: Using MSI-X interrupts with 3 vectors
<6>igb3: Ethernet address: 00:e0:97:1b:ac:af
<6>igb3: netmap queues/slots: TX 2/1024, RX 2/1024
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
orm0: <ISA Option ROM> at iomem 0xee800-0xeffff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC897 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC897 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0
pcm1: <Realtek ALC897 (Front Analog)> at nid 27 and 25 on hdaa0
pcm2: <Realtek ALC897 (Rear Digital)> at nid 30 on hdaa0
hdacc1: <Intel Braswell HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Braswell Audio Function Group> at nid 1 on hdacc1
hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (6) in association 1! Disabling association.
hdaa1: hdaa_audio_as_parse: Duplicate pin 0 (7) in association 1! Disabling association.
Trying to mount root from zfs:pfSense/ROOT/default []...
ugen0.1: <0x8086 XHCI root HUB> at usbus0
Root mount waiting for: CAM usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: 13 ports with 13 removable, self powered
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for:ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Protectli 120GB mSATA SBFM61.5> ACS-4 ATA SATA 3.x device
ada0: Serial Number 833407270F0800061518
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
 CAM
<118>Configuring crash dumps...
<118>Using /dev/ada0p2 for dump device.
<118>Filesystems are clean, continuing...
<118>Mounting filesystems...
<118>
<118>        __
<118> _ __  / _|___  ___ _ __  ___  ___
<118>| '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \
<118>| |_) |  _\__ \  __/ | | \__ \  __/
<118>| .__/|_| |___/\___|_| |_|___/\___|
<118>|_|
<118>
<118>
<118>Welcome to pfSense 2.6.0-RELEASE...
<118>
<118>savecore 103 - - reboot after panic: page fault
<118>savecore 103 - - writing core to /var/crash/textdump.tar.2
<118>...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/ipsec /usr/local/lib/perl5/5.32/mach/CORE
<118>32-bit compatibility ldconfig path:
<118>done.
<118>>>> Removing vital flag from php74... done.
<118>External config loader 1.0 is now starting... ada0p1 ada0p3
<118>Launching the init system...Updating CPU Microcode...
CPU: Intel(R) Celeron(R) CPU  J3160  @ 1.60GHz (1600.04-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x406c4  Family=0x6  Model=0x4c  Stepping=4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
  Structured Extended Features3=0xc000400<MD_CLEAR,IBPB,STIBP>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
<118>Done.
<118>.... done.
<118>Initializing.................. done.
<118>Starting device manager (devd)...done.
<118>Loading configuration......done.
<118>Updating configuration...done.
<118>Checking config backups consistency.................................done.
<118>Setting up extended sysctls...done.
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> on motherboard
WARNING: Device "crypto" is Giant locked and may be deleted before FreeBSD 14.0.
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
<118>Setting timezone...done.
<118>Configuring loopback interface...
<6>lo0: link state changed to UP
<118>done.
<118>Starting syslog...done.
<118>Setting up interfaces microcode...done.
<118>Removed leftover dhcp6c lock file: /tmp/dhcp6c_igb0_lock
<118>Configuring loopback interface...done.
<118>Configuring VLAN interfaces...
<6>vlan0: changing name to 'igb1.10'
<6>vlan1: changing name to 'igb1.107'
<6>vlan2: changing name to 'igb1.20'
<6>vlan3: changing name to 'igb1.30'
<6>vlan4: changing name to 'igb1.40'
<118>done.
<118>Configuring SECURE_LAN interface...done.
<118>Configuring IOT_LAN interface...done.
<118>Configuring RENTAL_LAN interface...done.
<118>Configuring GUEST_LAN interface...done.
<118>Configuring VM_LAN interface...done.
<118>Configuring LAN interface...done.
<118>Configuring WAN interface...
<6>igb1: link state changed to UP
<6>igb1.20: link state changed to UP
<6>igb1.40: link state changed to UP
<6>igb1.10: link state changed to UP
<6>igb1.107: link state changed to UP
<6>igb1.30: link state changed to UP
<6>igb0: link state changed to UP
<118>done.
<118>Configuring CARP settings...done.
<118>Syncing OpenVPN settings...done.
<6>pflog0: promiscuous mode enabled
<118>Configuring firewall.....0 addresses deleted.
<118>.done.
<118>Starting PFLOG...done.
<118>Setting up gateway monitors...done.
<118>Setting up static routes...done.
<118>Setting up DNSs...
<118>Starting DNS Resolver...done.
<118>Synchronizing user settings...done.
<118>Configuring CRON...done.
<118>Bootstrapping clock...done.
<118>Starting NTP Server...done.
<118>Starting webConfigurator...done.
<118>Starting DHCP service...done.
<118>Starting DHCPv6 service...done.
<118>Configuring firewall.....0 addresses deleted.
<118>0 addresses deleted.
<118>.done.
<118>Generating RRD graphs...done.
<118>Starting syslog...done.
<118>Starting CRON... done.
<118> Starting package Avahi...done.
<118> Starting package pfBlockerNG-devel...done.
<118> Starting /usr/local/etc/rc.d/pfb_dnsbl.sh...done.
<118> Starting /usr/local/etc/rc.d/pfb_filter.sh...done.
<118>pfSense 2.6.0-RELEASE amd64 Mon Jan 31 19:57:53 UTC 2022
<118>Bootup complete


Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 02
fault virtual address	= 0x8
fault code		= supervisor read data, page not present
instruction pointer	= 0x20:0xffffffff80daa74a
stack pointer	        = 0x28:0xfffffe00004eabc0
frame pointer	        = 0x28:0xfffffe00004eac10
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 0 (if_config_tqg_0)
trap number		= 12
panic: page fault
cpuid = 1
time = 1677458356
KDB: enter: panic