AMIBIOS(C)2006 American Megatrends, Inc. MB-7580 Ver.WD0 04/26/2010 CPU : Pentium(R) Dual-Core CPU E5300 @ 2.60GHz Speed : 2.60 GHz Press DEL to run Setup (F4 on Remote Keyboard) Press n if you want to boot from the network Press F11 for BBS POPUP (F3 on Remote Keyboard) The MCH is operating with DDR2 800 DRAM Timing: Tcl:6/Tras:18/Trp:6/Trcd:6/Twr:6/Trfc:52/Twtr:3/Trrd:3/Trtp:3 Initializing USB Controllers .. Done. 4062MB OK Auto-Detecting 3rd Slave...IDE Hard Disk Auto-detecting USB Mass Storage Devices .. /boot/config: -S115200 -D Consoles: internal video/keyboard serial port BIOS drive C: is disk0 BIOS 639kB/3109504kB available memory FreeBSD/x86 bootstrap loader, Revision 1.1 (Wed Nov 15 17:39:21 UTC 2023 root@freebsd) Loading /boot/defaults/loader.conf Loading /boot/defaults/loader.conf Loading /boot/device.hints Loading /boot/loader.conf Loading /boot/loader.conf.local \ / __ _ __ / _|___ ___ _ __ ___ ___ | '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \ | |_) | _\__ \ __/ | | \__ \ __/ | .__/|_| |___/\___|_| |_|___/\___| |_| +---------- Welcome to pfSense -----------+ __________________________ | | / ___\ | 1. Boot Multi user [Enter] | | /` | 2. Boot Single user | | / :-| | 3. Escape to loader prompt | | _________ ___/ /_ | | 4. Reboot | | /` ____ / /__ ___/ | | 5. Cons: Dual (Serial primary) | | / / / / / / | | | | / /___/ / / / | | Options: | | / ______/ / / | | 6. Kernel: default/kernel (1 of 2) | |/ / / / | | 7. Boot Options | / /___/ | | | / | | | /_________________________/ +-----------------------------------------+ - Autoboot in 0 seconds. [Space] to pause Loading kernel... /boot/kernel/kernel text=0x19ba18 text=0xfdab90 text=0x17dcbb0 data=0x180 data=0x222690+0x3dc970 0x8+0x1c7460+0x8+0x1d5994/ Loading configured modules... /boot/entropy size=0x1000 can't find '/etc/hostid' GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb ---<>--- Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.0-CURRENT amd64 1400094 #1 RELENG_2_7_1-n255918-774957be06d: Wed Nov 15 17:41:06 UTC 2023 root@freebsd:/var/jenkins/workspace/pfSense-CE-snapshots-2_7_1-main/obj/amd64/GScwGwyy/var/jenkins/workspace/pfSense-CE-snapshots-2_7_1-main/souc-RELENG_2_7_1/amd64.amd64/sys/pfSense amd64 FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152) VT(vga): resolution 640x480 CPU: Pentium(R) Dual-Core CPU E5300 @ 2.60GHz (2593.63-MHz K8-class CPU) Origin="GenuineIntel" Id=0x1067a Family=0x6 Model=0x17 Stepping=10 Features=0xbfebfbff Features2=0xc00e3bd AMD Features=0x20100800 AMD Features2=0x1 VT-x: HLT,PAUSE TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 4046221312 (3858 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <042610 APIC1157> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) random: unblocking device. ioapic0 irqs 0-23 Launching APs: 1 TCP_ratelimit: Is now initialized iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff807652e0, 0) error 1 random: entropy device external interface wlan: mac acl policy registered ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff807475a0, 0) error 1 ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80747650, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80747700, 0) error 1 iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff80765180, 0) error 1 iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80765230, 0) error 1 kbd1 at kbdmux0 WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0. vtvga0: netgate0: smbios0: at iomem 0xf97e0-0xf97fe smbios0: Version: 2.5 acpi0: <042610 RSDT1157> acpi0: Power Button (fixed) cpu0: on acpi0 attimer0: port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: irq 16 at device 1.0 on pci0 pci1: on pcib1 pci1: at device 0.0 (no driver attached) vgapci0: port 0x6800-0x6807 mem 0xfe000000-0xfe3fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 agp0: on vgapci0 WARNING: Device "agp" is Giant locked and may be deleted before FreeBSD 14.0. agp0: aperture size is 256M, detected 32764k stolen memory vgapci0: Boot video device pcib2: irq 16 at device 28.0 on pci0 pci2: on pcib2 em0: port 0x9c00-0x9c1f mem 0xfe6e0000-0xfe6fffff,0xfe6dc000-0xfe6dffff irq 16 at device 0.0 on pci2 em0: EEPROM V1.9-0 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using 2 RX queues 2 TX queues em0: Using MSI-X interrupts with 3 vectors em0: Ethernet address: 00:90:7f:a8:62:ef em0: netmap queues/slots: TX 2/1024, RX 2/1024 pcib3: irq 17 at device 28.1 on pci0 pci3: on pcib3 em1: port 0xac00-0xac1f mem 0xfe7e0000-0xfe7fffff,0xfe7dc000-0xfe7dffff irq 17 at device 0.0 on pci3 em1: EEPROM V1.9-0 em1: Using 1024 TX descriptors and 1024 RX descriptors em1: Using 2 RX queues 2 TX queues em1: Using MSI-X interrupts with 3 vectors em1: Ethernet address: 00:90:7f:a8:62:f0 em1: netmap queues/slots: TX 2/1024, RX 2/1024 pcib4: irq 18 at device 28.2 on pci0 pci4: on pcib4 em2: port 0xbc00-0xbc1f mem 0xfe8e0000-0xfe8fffff,0xfe8dc000-0xfe8dffff irq 18 at device 0.0 on pci4 em2: EEPROM V1.9-0 em2: Using 1024 TX descriptors and 1024 RX descriptors em2: Using 2 RX queues 2 TX queues em2: Using MSI-X interrupts with 3 vectors em2: Ethernet address: 00:90:7f:a8:62:f1 em2: netmap queues/slots: TX 2/1024, RX 2/1024 pcib5: irq 19 at device 28.3 on pci0 pci5: on pcib5 em3: port 0xcc00-0xcc1f mem 0xfe9e0000-0xfe9fffff,0xfe9dc000-0xfe9dffff irq 19 at device 0.0 on pci5 em3: EEPROM V1.9-0 em3: Using 1024 TX descriptors and 1024 RX descriptors em3: Using 2 RX queues 2 TX queues em3: Using MSI-X interrupts with 3 vectors em3: Ethernet address: 00:90:7f:a8:62:f2 em3: netmap queues/slots: TX 2/1024, RX 2/1024 pcib6: irq 16 at device 28.4 on pci0 pci6: on pcib6 em4: port 0xdc00-0xdc1f mem 0xfeae0000-0xfeafffff,0xfeadc000-0xfeadffff irq 16 at device 0.0 on pci6 em4: EEPROM V1.9-0 em4: Using 1024 TX descriptors and 1024 RX descriptors em4: Using 2 RX queues 2 TX queues em4: Using MSI-X interrupts with 3 vectors em4: Ethernet address: 00:90:7f:a8:62:f3 em4: netmap queues/slots: TX 2/1024, RX 2/1024 pcib7: irq 17 at device 28.5 on pci0 pci7: on pcib7 em5: port 0xec00-0xec1f mem 0xfebe0000-0xfebfffff,0xfebdc000-0xfebdffff irq 17 at device 0.0 on pci7 em5: EEPROM V1.9-0 em5: Using 1024 TX descriptors and 1024 RX descriptors em5: Using 2 RX queues 2 TX queues em5: Using MSI-X interrupts with 3 vectors em5: Ethernet address: 00:90:7f:a8:62:f4 em5: netmap queues/slots: TX 2/1024, RX 2/1024 uhci0: port 0x7080-0x709f irq 23 at device 29.0 on pci0 usbus0 on uhci0 usbus0: 12Mbps Full Speed USB v1.0 uhci1: port 0x7000-0x701f irq 19 at device 29.1 on pci0 usbus1 on uhci1 usbus1: 12Mbps Full Speed USB v1.0 uhci2: port 0x6c00-0x6c1f irq 18 at device 29.2 on pci0 usbus2 on uhci2 usbus2: 12Mbps Full Speed USB v1.0 uhci3: port 0x6880-0x689f irq 16 at device 29.3 on pci0 usbus3 on uhci3 usbus3: 12Mbps Full Speed USB v1.0 ehci0: mem 0xfe4ff800-0xfe4ffbff irq 23 at device 29.7 on pci0 usbus4: EHCI version 1.0 usbus4 on ehci0 usbus4: 480Mbps High Speed USB v2.0 pcib8: at device 30.0 on pci0 pci8: on pcib8 fxp0: port 0x8c00-0x8c3f mem 0xfe5ff000-0xfe5fffff irq 20 at device 8.0 on pci8 miibus0: on fxp0 inphy0: PHY 1 on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow fxp0: Ethernet address: 00:90:7f:a8:62:ee isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 ata0: at channel 0 on atapci0 atapci1: port 0x7c00-0x7c07,0x7880-0x7883,0x7800-0x7807,0x7480-0x7483,0x7400-0x740f mem 0xfe4ffc00-0xfe4fffff irq 19 on pci0 ata2: at channel 0 on atapci1 ata3: at channel 1 on atapci1 acpi_button0: on acpi0 ns8250: UART FCR is broken ns8250: UART FCR is broken uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (115200,n,8,1) ns8250: UART FCR is broken ns8250: UART FCR is broken uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 ppc0: port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: on ppc0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] est0: on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 6160d2406000d24 device_attach: est0 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 6160d2406000d24 device_attach: est1 attach returned 6 Timecounter "TSC-low" frequency 1296749658 Hz quality 1000 Timecounters tick every 1.000 msec ugen0.1: at usbus0 ugen4.1: at usbus4 uhub0 on usbus0 uhub1 on usbus4 uhub1: on usbus4 uhub0: on usbus0 ugen1.1: at usbus1 ugen3.1: at usbus3 uhub2 on usbus1 uhub2: on usbus1 uhub3 on usbus3 uhub3: on usbus3 ugen2.1: at usbus2 uhub4 on usbus2 uhub4: on usbus2 Trying to mount root from ufs:/dev/ufsid/4bd4d819f75951f7 [rw,noatime]... uhub0: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered Root mount waiting for: usbus4 CAM ada0 at ata2 bus 0 scbus1 target 1 lun 0 ada0: ACS-2 ATA SATA 3.x device ada0: Serial Number 1309092C8983 ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada0: 114473MB (234441648 512 byte sectors) ada0: quirks=0x2 Root mount waiting for: usbus4 uhub1: 8 ports with 8 removable, self powered WARNING: / was not properly dismounted WARNING: /: mount pending error: blocks 832 files 2172 Dual Console: Serial Primary, Video Secondary Sat Nov 25 15:08:14 CET 2023 2023-11-25T15:08:14.633744+01:00 - init 68 - - getty repeating too quickly on port /dev/ttyv4, sleeping 30 secs 2023-11-25T15:08:14.635432+01:00 - init 74 - - getty repeating too quickly on port /dev/ttyv1, sleeping 30 secs 2023-11-25T15:08:14.634569+01:00 - init 69 - - getty repeating too quickly on port /dev/ttyv7, sleeping 30 secs 2023-11-25T15:08:14.635483+01:00 - init 71 - - getty repeating too quickly on port /dev/ttyu0, sleeping 30 secs 2023-11-25T15:08:14.636176+01:00 - init 75 - - getty repeating too quickly on port /dev/ttyv3, sleeping 30 secs 2023-11-25T15:08:14.635808+01:00 - init 73 - - getty repeating too quickly on port /dev/ttyv5, sleeping 30 secs 2023-11-25T15:08:14.636592+01:00 - init 76 - - getty repeating too quickly on port /dev/ttyv0, sleeping 30 secs 2023-11-25T15:08:14.636340+01:00 - init 70 - - getty repeating too quickly on port /dev/ttyv2, sleeping 30 secs 2023-11-25T15:08:14.635120+01:00 - init 72 - - getty repeating too quickly on port /dev/ttyv6, sleeping 30 secs 2023-11-25T15:08:44.714358+01:00 - init 104 - - getty repeating too quickly on port /dev/ttyv7, sleeping 30 secs 2023-11-25T15:08:44.726422+01:00 - init 113 - - getty repeating too quickly on port /dev/ttyu0, sleeping 30 secs 2023-11-25T15:08:44.726261+01:00 - init 115 - - getty repeating too quickly on port /dev/ttyv3, sleeping 30 secs 2023-11-25T15:08:44.726959+01:00 - init 114 - - getty repeating too quickly on port /dev/ttyv4, sleeping 30 secs 2023-11-25T15:08:44.729840+01:00 - init 121 - - getty repeating too quickly on port /dev/ttyv6, sleeping 30 secs 2023-11-25T15:08:44.726554+01:00 - init 116 - - getty repeating too quickly on port /dev/ttyv0, sleeping 30 secs 2023-11-25T15:09:14.792448+01:00 - init 140 - - getty repeating too quickly on port /dev/ttyv7, sleeping 30 secs 2023-11-25T15:09:14.793669+01:00 - init 143 - - getty repeating too quickly on port /dev/ttyv1, sleeping 30 secs 2023-11-25T15:09:14.793246+01:00 - init 144 - - getty repeating too quickly on port /dev/ttyv4, sleeping 30 secs 2023-11-25T15:09:14.803374+01:00 - init 145 - - getty repeating too quickly on port /dev/ttyu0, sleeping 30 secs 2023-11-25T15:09:14.803768+01:00 - init 146 - - getty repeating too quickly on port /dev/ttyv0, sleeping 30 secs 2023-11-25T15:09:14.810733+01:00 - init 166 - - getty repeating too quickly on port /dev/ttyv5, sleeping 30 secs 2023-11-25T15:09:14.808667+01:00 - init 160 - - getty repeating too quickly on port /dev/ttyv3, sleeping 30 secs 2023-11-25T15:09:14.810290+01:00 - init 164 - - getty repeating too quickly on port /dev/ttyv6, sleeping 30 secs 2023-11-25T15:09:14.810443+01:00 - init 165 - - getty repeating too quickly on port /dev/ttyv2, sleeping 30 secs 2023-11-25T15:09:44.894584+01:00 - init 199 - - getty repeating too quickly on port /dev/ttyv3, sleeping 30 secs 2023-11-25T15:09:44.894693+01:00 - init 200 - - getty repeating too quickly on port /dev/ttyv6, sleeping 30 secs 2023-11-25T15:09:44.895731+01:00 - init 201 - - getty repeating too quickly on port /dev/ttyv0, sleeping 30 secs 2023-11-25T15:09:44.895707+01:00 - init 202 - - getty repeating too quickly on port /dev/ttyu0, sleeping 30 secs 2023-11-25T15:09:44.896203+01:00 - init 203 - - getty repeating too quickly on port /dev/ttyv4, sleeping 30 secs 2023-11-25T15:09:44.896573+01:00 - init 204 - - getty repeating too quickly on port /dev/ttyv1, sleeping 30 secs 2023-11-25T15:09:44.897093+01:00 - init 207 - - getty repeating too quickly on port /dev/ttyv5, sleeping 30 secs 2023-11-25T15:09:44.899120+01:00 - init 211 - - getty repeating too quickly on port /dev/ttyv2, sleeping 30 secs 2023-11-25T15:09:44.897826+01:00 - init 209 - - getty repeating too quickly on port /dev/ttyv7, sleeping 30 secs 2023-11-25T15:10:14.971759+01:00 - init 232 - - getty repeating too quickly on port /dev/ttyv1, sleeping 30 secs 2023-11-25T15:10:14.974987+01:00 - init 243 - - getty repeating too quickly on port /dev/ttyv5, sleeping 30 secs 2023-11-25T15:10:14.974680+01:00 - init 241 - - getty repeating too quickly on port /dev/ttyv2, sleeping 30 secs 2023-11-25T15:10:15.004480+01:00 - init 247 - - getty repeating too quickly on port /dev/ttyv6, sleeping 30 secs 2023-11-25T15:10:15.005037+01:00 - init 248 - - getty repeating too quickly on port /dev/ttyv3, sleeping 30 secs 2023-11-25T15:10:15.004749+01:00 - init 246 - - getty repeating too quickly on port /dev/ttyv0, sleeping 30 secs 2023-11-25T15:10:15.026111+01:00 - init 253 - - getty repeating too quickly on port /dev/ttyv4, sleeping 30 secs 2023-11-25T15:10:15.025819+01:00 - init 251 - - getty repeating too quickly on port /dev/ttyu0, sleeping 30 secs 2023-11-25T15:10:15.028091+01:00 - init 256 - - getty repeating too quickly on port /dev/ttyv7, sleeping 30 secs 2023-11-25T15:10:45.077533+01:00 - init 284 - - getty repeating too quickly on port /dev/ttyv4, sleeping 30 secs 2023-11-25T15:10:45.077057+01:00 - init 285 - - getty repeating too quickly on port /dev/ttyv3, sleeping 30 secs 2023-11-25T15:10:45.078635+01:00 - init 289 - - getty repeating too quickly on port /dev/ttyv2, sleeping 30 secs 2023-11-25T15:10:45.079139+01:00 - init 290 - - getty repeating too quickly on port /dev/ttyv1, sleeping 30 secs 2023-11-25T15:10:45.078826+01:00 - init 288 - - getty repeating too quickly on port /dev/ttyv5, sleeping 30 secs 2023-11-25T15:10:45.078344+01:00 - init 287 - - getty repeating too quickly on port /dev/ttyv6, sleeping 30 secs 2023-11-25T15:10:45.079335+01:00 - init 291 - - getty repeating too quickly on port /dev/ttyv0, sleeping 30 secs 2023-11-25T15:10:45.149818+01:00 - init 300 - - getty repeating too quickly on port /dev/ttyv7, sleeping 30 secs 2023-11-25T15:10:45.160435+01:00 - init 301 - - getty repeating too quickly on port /dev/ttyu0, sleeping 30 secs 2023-11-25T15:11:15.174740+01:00 - init 330 - - getty repeating too quickly on port /dev/ttyv5, sleeping 30 secs 2023-11-25T15:11:15.175445+01:00 - init 329 - - getty repeating too quickly on port /dev/ttyv1, sleeping 30 secs 2023-11-25T15:11:15.176008+01:00 - init 334 - - getty repeating too quickly on port /dev/ttyv0, sleeping 30 secs 2023-11-25T15:11:15.177654+01:00 - init 336 - - getty repeating too quickly on port /dev/ttyv3, sleeping 30 secs 2023-11-25T15:11:15.177954+01:00 - init 339 - - getty repeating too quickly on port /dev/ttyv2, sleeping 30 secs 2023-11-25T15:11:15.177141+01:00 - init 337 - - getty repeating too quickly on port /dev/ttyv4, sleeping 30 secs 2023-11-25T15:11:15.177432+01:00 - init 338 - - getty repeating too quickly on port /dev/ttyv6, sleeping 30 secs 2023-11-25T15:11:15.178949+01:00 - init 341 - - getty repeating too quickly on port /dev/ttyv7, sleeping 30 secs 2023-11-25T15:11:15.257413+01:00 - init 346 - - getty repeating too quickly on port /dev/ttyu0, sleeping 30 secs 2023-11-25T15:11:45.263974+01:00 - init 374 - - getty repeating too quickly on port /dev/ttyv6, sleeping 30 secs 2023-11-25T15:11:45.265423+01:00 - init 378 - - getty repeating too quickly on port /dev/ttyv0, sleeping 30 secs 2023-11-25T15:11:45.264267+01:00 - init 375 - - getty repeating too quickly on port /dev/ttyv3, sleeping 30 secs 2023-11-25T15:11:45.265528+01:00 - init 380 - - getty repeating too quickly on port /dev/ttyv5, sleeping 30 secs 2023-11-25T15:11:45.265992+01:00 - init 381 - - getty repeating too quickly on port /dev/ttyv4, sleeping 30 secs 2023-11-25T15:11:45.264939+01:00 - init 377 - - getty repeating too quickly on port /dev/ttyv2, sleeping 30 secs 2023-11-25T15:11:45.265227+01:00 - init 379 - - getty repeating too quickly on port /dev/ttyv1, sleeping 30 secs 2023-11-25T15:11:45.275127+01:00 - init 387 - - getty repeating too quickly on port /dev/ttyv7, sleeping 30 secs 2023-11-25T15:11:45.346180+01:00 - init 391 - - getty repeating too quickly on port /dev/ttyu0, sleeping 30 secs 2023-11-25T15:12:15.363479+01:00 - init 418 - - getty repeating too quickly on port /dev/ttyv4, sleeping 30 secs 2023-11-25T15:12:15.365935+01:00 - init 427 - - getty repeating too quickly on port /dev/ttyv5, sleeping 30 secs 2023-11-25T15:12:15.365584+01:00 - init 426 - - getty repeating too quickly on port /dev/ttyv6, sleeping 30 secs 2023-11-25T15:12:15.366010+01:00 - init 428 - - getty repeating too quickly on port /dev/ttyv3, sleeping 30 secs 2023-11-25T15:12:15.374576+01:00 - init 430 - - getty repeating too quickly on port /dev/ttyv1, sleeping 30 secs 2023-11-25T15:12:15.375309+01:00 - init 433 - - getty repeating too quickly on port /dev/ttyv0, sleeping 30 secs 2023-11-25T15:12:15.374867+01:00 - init 432 - - getty repeating too quickly on port /dev/ttyv7, sleeping 30 secs 2023-11-25T15:12:15.374380+01:00 - init 431 - - getty repeating too quickly on port /dev/ttyv2, sleeping 30 secs 2023-11-25T15:12:15.444662+01:00 - init 436 - - getty repeating too quickly on port /dev/ttyu0, sleeping 30 secs