FreeBSD/arm64 (Amnesiac) (ttyu0) -sh: /etc/rc.initial: not found FreeBSD/arm64 (Amnesiac) (ttyu0) -sh: /etc/rc.initial: not found FreeBSD/arm64 (Amnesiac) (ttyu0) -sh: /etc/rc.initial: not found FreeBSD/arm64 (Amnesiac) (ttyu0) -sh: /etc/rc.initial: not found FreeBSD/arm64 (Amnesiac) (ttyu0) -sh: /etc/rc.initial: not found TIM-1.0 WTMI-devel-18.12.1-1a13f2f WTMI: system early-init SVC REV: 5, CPU VDD voltage: 1.248V NOTICE: Booting Trusted Firmware NOTICE: BL1: v1.5(release):1f8ca7e-dirty (Marvell-devel-18.12.2) NOTICE: BL1: Built : 10:16:46, Oct 13 2021 NOTICE: BL1: Booting BL2 NOTICE: BL2: v1.5(release):1f8ca7e-dirty (Marvell-devel-18.12.2) NOTICE: BL2: Built : 10:16:50, Oct 13 2021 NOTICE: BL1: Booting BL31 NOTICE: BL31: v1.5(release):1f8ca7e-dirty (Marvell-devel-18.12.2) NOTICE: BL31: Built : 10 U-Boot 2018.03-devel-18.12.3-gc9aa92c-dirty (Oct 13 2021 - 10:14:54 -0300) Model: Netgate 1100 CPU 1200 [MHz] L2 800 [MHz] TClock 200 [MHz] DDR 750 [MHz] DRAM: 1 GiB Comphy chip #0: Comphy-0: USB3 5 Gbps Comphy-1: PEX0 2.5 Gbps Comphy-2: SATA0 6 Gbps SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode flags: ncq led only pmp fbss pio slum part sxs PCIE-0: Link down console comconsole failed to initialize Consoles: EFI console serial port . SF: Detected mx25u3235f with page size 256 Reading loader env vars from /efi/freebsd/loader.env Setting currdev to disk0p2: FreeBSD/arm64 EFI loader, Revision 1.1 -Wed Dec 6 20:57:46 UTC 2023 root@freebsd) Hit any key to stop autoboot: 0 Command line arguments: loader.efit! Image base: 0x7000000netgate-1100.dtb EFI version: 2.70720-sg1100.dtb EFI Firmware: Das U-Boot (rev 0.00)tb Console: efi,comconsole (0).dtb Load Path: /\armada-3720-sg1100.dtb Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(1)/eMMC(0)/HD(2,0x01,0,0x82001,0x20000) Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(1)/eMMC(0)/HD(2,0x01,0,0x82001,0x20000)4 ms (1.2 MiB/s) Setting currdev to disk0p2: at 07000000 ... Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(1)/eMMC(0)/HD(1,0x01,0,0x1,0x82000) sdhci@d0000.blk... Setting currdev to disk0p1:ady Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(1)/eMMC(0)/HD(3,0x01,0,0xa2001,0xdeee7f) Loading /boot/defaults/loader.confT/default: Loading /boot/defaults/loader.conf Loading /boot/device.hints Loading /boot/loader.conf Loading /boot/loader.conf.local | _ __ / _|___ ___ _ __ ___ ___ _ | '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \ _| |_ | |_) | _\__ \ __/ | | \__ \ __/ |_ _| | .__/|_| |___/\___|_| |_|___/\___| |_| |_| +---- Welcome to Netgate pfSense Plus ----+ __________________________ | | / ___\ | 1. Boot Multi user [Enter] | | /` | 2. Boot Single user | | / :-| | 3. Escape to loader prompt | | _________ ___/ /_ | | 4. Reboot | | /` ____ / /__ ___/ | | 5. Cons: Serial | | / / / / / / | | | | / /___/ / / / | | Options: | | / ______/ / / _ | | 6. Kernel: default/kernel (1 of 2) | |/ / / / _| |_ | | 7. Boot Options | / /___/ |_ _| | | 8. Boot Environments | / |_| | | | /_________________________/ +-----------------------------------------+ \ Autoboot in 0 seconds. [Space] to pause Loading kernel... /boot/kernel/kernel text=0x2a8 text=0xc22ff0 text=0x145777c data=0x171e58 data=0x0+0x2d2000 0x8+0x18c4c8+0x8+0x1a06b0- Loading configured modules... /boot/kernel/zfs.ko text=0xaf0b0 text=0x211d80 data=0x2c8f0+0xaabdc 0x8+0x34c80+0x8+0x2e07c /boot/kernel/opensolaris.ko text=0x18d3 text=0x9fc data=0x4a0+0x1a030 0x8+0xfc0+0x8+0x88b /boot/entropy size=0x1000 /etc/hostid size=0x25 Using DTB provided by EFI at 0x8000000. GDB: current port: uart KDB: debugger backends: ddb gdb KDB: current backend: ddb Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.0-CURRENT aarch64 1400094 #1 plus-RELENG_23_09_1-n256200-3de1e293f3a: Wed Dec 6 20:59:18 UTC 2023 root@freebsd:/var/jenkins/workspace/pfSense-Plus-snapshots-23_09_1-main/obj/aarch64/8ra4gn87/var/jenkins/workspace/pfSense-Plus-snapshots-23_09_1-main/sources/FreeBSD-src-plus-RELENG_23_09_1/arm64.aarch64/sys/pfSense arm64 FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152) VT: init without driver. module scmi already present! real memory = 1073680384 (1023 MB) avail memory = 977846272 (932 MB) Starting CPU 1 (1) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs random: unblocking device. random: entropy device external interface ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xffff000000251810, 0) error 1 ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffff0000002518bc, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffff000000251968, 0) error 1 iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_bss_fw, 0xffff000000251a14, 0) error 1 iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffff000000251ac0, 0) error 1 wlan: mac acl policy registered iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffff000000251b6c, 0) error 1 kbd0 at kbdmux0 ofwbus0: simplebus0: on ofwbus0 simplebus1: on simplebus0 ofw_firmware0: on ofwbus0 simple_mfd0: mem 0x13800-0x138ff,0x13c00-0x13c1f on simplebus1 simple_mfd1: mem 0x18800-0x188ff,0x18c00-0x18c1f on simplebus1 psci0: on ofwbus0 netgate0: gic0: mem 0x1d00000-0x1d0ffff,0x1d40000-0x1d7ffff,0x1d80000-0x1d81fff,0x1d90000-0x1d91fff,0x1da0000-0x1dbffff irq 28 on simplebus1 gpio0: mem 0x13800-0x138ff,0x13c00-0x13c1f irq 29,30,31,32,33,34,35,36,37,38,39,40 on simple_mfd0 gpiobus0: on gpio0 gpio1: mem 0x18800-0x188ff,0x18c00-0x18c1f irq 41,42,43,44,45 on simple_mfd1 gpiobus1: on gpio1 gpioregulator0: on ofwbus0 a37x0-xtal0: mem 0x13800-0x138ff,0x13c00-0x13c1f on simple_mfd0 generic_timer0: irq 0,1,2,3 on ofwbus0 Timecounter "ARM MPCore Timecounter" frequency 12500000 Hz quality 1000 Event timer "ARM MPCore Eventtimer" frequency 12500000 Hz quality 1000 a37x0_tbg0: mem 0x13200-0x132ff on simplebus1 a37x0_nb_periph_driver0: mem 0x13000-0x130ff on simplebus1 a37x0_sb_periph_driver0: mem 0x18000-0x180ff on simplebus1 cpulist0: on ofwbus0 cpu0: on cpulist0 pmu0: irq 4 on ofwbus0 spi0: mem 0x10600-0x10fff irq 6 on simplebus1 iichb0: mem 0x11000-0x11023 irq 7 on simplebus1 iicbus0: on iichb0 iic0: on iicbus0 uart0: mem 0x12000-0x12017 irq 9,10,11 on simplebus1 uart0: console (115200,n,8,1) gpioc0: on gpio0 gpioc1: on gpio1 mvneta0: mem 0x30000-0x33fff irq 14 on simplebus1 mvneta0: version is 10 mdio0: on mvneta0 mdioproxy0: on mdio0 e6000sw0: on mdio0 e6000sw0: multi-chip addressing mode (0x1) e6000sw0: CPU port at 0 e6000sw0: fixed port at 0 e6000sw0: PHY at port 1 miibus0: on e6000sw0 e1000phy0: PHY 17 on miibus0 e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto e6000sw0: PHY at port 2 miibus1: on e6000sw0 e1000phy1: PHY 18 on miibus1 e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto e6000sw0: PHY at port 3 miibus2: on e6000sw0 e1000phy2: PHY 19 on miibus2 e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto e6000sw0: switch is ready. etherswitch0: on e6000sw0 mvneta0: Ethernet address: f0:ad:4e:2c:74:e7 xhci0: mem 0x58000-0x5bfff irq 16 on simplebus1 xhci0: 32 bytes context size, 32-bit DMA usbus0 on xhci0 ehci0: mem 0x5e000-0x5efff irq 17 on simplebus1 usbus1: EHCI version 1.0 usbus1 on ehci0 sdhci_xenon0: mem 0xd0000-0xd02ff,0x1e808-0x1e80b irq 25 on simplebus1 sdhci_xenon1: mem 0xd8000-0xd82ff,0x17808-0x1780b irq 26 on simplebus1 mmc0: on sdhci_xenon1 ahci0: mem 0xe0000-0xe0177 irq 27 on simplebus1 ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with FBS ahcich0: at channel 0 on ahci0 device_attach: ahcich0 attach returned 6 pcib0: mem 0xd0070000-0xd008ffff irq 5 on simplebus0 pcib0: link never came up pci0: on pcib0 gpioled0: on ofwbus0 armv8crypto0: Timecounters tick every 1.000 msec mvneta0: link state changed to UP ZFS filesystem version: 5 ZFS storage pool version: features support (5000) usbus0: 5.0Gbps Super Speed USB v3.0 usbus1: 480Mbps High Speed USB v2.0 ugen1.1: at usbus1 uhub0 on usbus1 uhub0: on usbus1 ugen0.1: at usbus0 uhub1 on usbus0 uhub1: on usbus0 spibus0: on spi0 mx25l0: at cs 0 mode 0 on spibus0 mx25l0: device type mx25u3235f, size 4096K in 64 sectors of 64K, erase size 4K mmc0: Failed to set VCCQ for card at relative address 2 mmcsd0: 8GB at mmc0 50.0MHz/8bit/65535-block mmcsd0boot0: 4MB partition 1 at mmcsd0 mmcsd0boot1: 4MB partition 2 at mmcsd0 mmcsd0rpmb: 4MB partition 3 at mmcsd0 CPU 0: ARM Cortex-A53 r0p4 affinity: 0 Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> Instruction Set Attributes 0 = Instruction Set Attributes 1 = <> Instruction Set Attributes 2 = <> Processor Features 0 = Processor Features 1 = <> Memory Model Features 0 = Memory Model Features 1 = <8bit VMID> Memory Model Features 2 = <32bit CCIDX,48bit VA> Debug Features 0 = Debug Features 1 = <> Auxiliary Features 0 = <> Auxiliary Features 1 = <> AArch32 Instruction Set Attributes 5 = AArch32 Media and VFP Features 0 = AArch32 Media and VFP Features 1 = CPU 1: ARM Cortex-A53 r0p4 affinity: 1 Release APs...Trying to mount root from zfs:pfSense/ROOT/default []... done TCP_ratelimit: Is now initialized e6000sw0port1: link state changed to DOWN e6000sw0port2: link state changed to UP e6000sw0port3: link state changed to DOWN uhub1: 2 ports with 2 removable, self powered uhub0: 1 port with 1 removable, self powered Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Warning: no time-of-day clock registered, system time will not be set accurately No suitable dump device was found. Setting hostuuid: e3720e12-2500-4645-b7ce-88e194c5dc59. Setting hostid: 0x52c97c81. Starting file system checks: Mounting local filesystems:. Generating MFS /etc partition /etc/rc.d/etcmfs: bsdlabel: not found Generating MFS /var partition /etc/rc.d/varmfs: bsdlabel: not found Setting up harvesting: [CALLOUT],[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED Feeding entropy: . /etc/rc: WARNING: $hostname is not set -- see rc.conf(5). ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/lib/engines /usr/local/lib/compat/pkg /usr/local/lib/ipsec /usr/local/lib/perl5/5.34/mach/CORE 32-bit compatibility ldconfig path: lo0: link state changed to UP Starting Network: lo0 mvneta0 enc0. lo0: flags=1008049 metric 0 mtu 16384 options=680003 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7 groups: lo nd6 options=21 mvneta0: flags=1008a02 metric 0 mtu 1500 options=bb ether f0:ad:4e:2c:74:e7 media: Ethernet 1000baseT status: active nd6 options=21 enc0: flags=0 metric 0 mtu 1536 options=0 groups: enc nd6 options=21 Starting devd. Starting Network: mvneta0. mvneta0: flags=1008a02 metric 0 mtu 1500 options=bb ether f0:ad:4e:2c:74:e7 media: Ethernet 1000baseT status: active nd6 options=21 Starting Network: enc0. enc0: flags=0 metric 0 mtu 1536 options=0 groups: enc nd6 options=21 add host 127.0.0.1: gateway lo0 fib 0: route already in table add host ::1: gateway lo0 fib 0: route already in table add net fe80::: gateway ::1 add net ff02::: gateway ::1 add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 Creating and/or trimming log files. Clearing /tmp (X related). Updating /var/run/os-release done. Updating motd:. Starting syslogd. Mounting late filesystems:. /etc/rc: WARNING: $sshguard_enable is not set properly - see rc.conf(5). Starting cron. /etc/rc: WARNING: $scponlyc_enable is not set properly - see rc.conf(5). Starting background file system checks in 60 seconds. Thu Jan 1 01:00:26 CET 1970 FreeBSD/arm64 (Amnesiac) (ttyu0) -sh: /etc/rc.initial: not found FreeBSD/arm64 (Amnesiac) (ttyu0) -sh: /etc/rc.initial: not found FreeBSD/arm64 (Amnesiac) (ttyu0) -sh: /etc/rc.initial: not found FreeBSD/arm64 (Amnesiac) (ttyu0) -sh: /etc/rc.initial: not found FreeBSD/arm64 (Amnesiac) (ttyu0) -sh: /etc/rc.initial: not found FreeBSD/arm64 (Amnesiac) (ttyu0) -sh: /etc/rc.initial: not found FreeBSD/arm64 (Amnesiac) (ttyu0) -sh: /etc/rc.initial: not found FreeBSD/arm64 (Amnesiac) (ttyu0) -sh: /etc/rc.initial: not found FreeBSD/arm64 (Amnesiac) (ttyu0) -sh: /etc/rc.initial: not found TIM-1.0 WTMI-devel-18.12.1-1a13f2f WTMI: system early-init SVC REV: 5, CPU VDD voltage: 1.248V NOTICE: Booting Trusted Firmware NOTICE: BL1: v1.5(release):1f8ca7e-dirty (Marvell-devel-18.12.2) NOTICE: BL1: Built : 10:16:46, Oct 13 2021 NOTICE: BL1: Booting BL2 NOTICE: BL2: v1.5(release):1f8ca7e-dirty (Marvell-devel-18.12.2) NOTICE: BL2: Built : 10:16:50, Oct 13 2021 NOTICE: BL1: Booting BL31 NOTICE: BL31: v1.5(release):1f8ca7e-dirty (Marvell-devel-18.12.2) NOTICE: BL31: Built : 10 U-Boot 2018.03-devel-18.12.3-gc9aa92c-dirty (Oct 13 2021 - 10:14:54 -0300) Model: Netgate 1100 CPU 1200 [MHz] L2 800 [MHz] TClock 200 [MHz] DDR 750 [MHz] DRAM: 1 GiB Comphy chip #0: Comphy-0: USB3 5 Gbps Comphy-1: PEX0 2.5 Gbps Comphy-2: SATA0 6 Gbps SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode flags: ncq led only pmp fbss pio slum part sxs PCIE-0: Link down console comconsole failed to initialize Consoles: EFI console serial port . SF: Detected mx25u3235f with page size 256 Reading loader env vars from /efi/freebsd/loader.env Setting currdev to disk0p2: FreeBSD/arm64 EFI loader, Revision 1.1 -Wed Dec 6 20:57:46 UTC 2023 root@freebsd) Hit any key to stop autoboot: 0 Command line arguments: loader.efit! Image base: 0x7000000netgate-1100.dtb EFI version: 2.70720-sg1100.dtb EFI Firmware: Das U-Boot (rev 0.00)tb Console: efi,comconsole (0).dtb Load Path: /\armada-3720-sg1100.dtb Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(1)/eMMC(0)/HD(2,0x01,0,0x82001,0x20000) Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(1)/eMMC(0)/HD(2,0x01,0,0x82001,0x20000)0 ms (879.9 KiB/s) Setting currdev to disk0p2: at 07000000 ... Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(1)/eMMC(0)/HD(1,0x01,0,0x1,0x82000) sdhci@d0000.blk... Setting currdev to disk0p1:ady Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(1)/eMMC(0)/HD(3,0x01,0,0xa2001,0xdeee7f) Loading /boot/defaults/loader.confT/default: Loading /boot/defaults/loader.conf Loading /boot/device.hints Loading /boot/loader.conf Loading /boot/loader.conf.local | _ __ / _|___ ___ _ __ ___ ___ _ | '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \ _| |_ | |_) | _\__ \ __/ | | \__ \ __/ |_ _| | .__/|_| |___/\___|_| |_|___/\___| |_| |_| +---- Welcome to Netgate pfSense Plus ----+ __________________________ | | / ___\ | 1. Boot Multi user [Enter] | | /` | 2. Boot Single user | | / :-| | 3. Escape to loader prompt | | _________ ___/ /_ | | 4. Reboot | | /` ____ / /__ ___/ | | 5. Cons: Serial | | / / / / / / | | | | / /___/ / / / | | Options: | | / ______/ / / _ | | 6. Kernel: default/kernel (1 of 2) | |/ / / / _| |_ | | 7. Boot Options | / /___/ |_ _| | | 8. Boot Environments | / |_| | | | /_________________________/ +-----------------------------------------+ \ Autoboot in 0 seconds. [Space] to pause Loading kernel... /boot/kernel/kernel text=0x2a8 text=0xc22ff0 text=0x145777c data=0x171e58 data=0x0+0x2d2000 0x8+0x18c4c8+0x8+0x1a06b0- Loading configured modules... /boot/kernel/zfs.ko text=0xaf0b0 text=0x211d80 data=0x2c8f0+0xaabdc 0x8+0x34c80+0x8+0x2e07c /boot/entropy size=0x1000 /boot/kernel/opensolaris.ko text=0x18d3 text=0x9fc data=0x4a0+0x1a030 0x8+0xfc0+0x8+0x88b /etc/hostid size=0x25 Using DTB provided by EFI at 0x8000000. GDB: current port: uart KDB: debugger backends: ddb gdb KDB: current backend: ddb Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.0-CURRENT aarch64 1400094 #1 plus-RELENG_23_09_1-n256200-3de1e293f3a: Wed Dec 6 20:59:18 UTC 2023 root@freebsd:/var/jenkins/workspace/pfSense-Plus-snapshots-23_09_1-main/obj/aarch64/8ra4gn87/var/jenkins/workspace/pfSense-Plus-snapshots-23_09_1-main/sources/FreeBSD-src-plus-RELENG_23_09_1/arm64.aarch64/sys/pfSense arm64 FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152) VT: init without driver. module scmi already present! real memory = 1073680384 (1023 MB) avail memory = 977846272 (932 MB) Starting CPU 1 (1) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs random: unblocking device. random: entropy device external interface ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xffff000000251810, 0) error 1 ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffff0000002518bc, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffff000000251968, 0) error 1 iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_bss_fw, 0xffff000000251a14, 0) error 1 iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffff000000251ac0, 0) error 1 wlan: mac acl policy registered iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffff000000251b6c, 0) error 1 kbd0 at kbdmux0 ofwbus0: simplebus0: on ofwbus0 simplebus1: on simplebus0 ofw_firmware0: on ofwbus0 simple_mfd0: mem 0x13800-0x138ff,0x13c00-0x13c1f on simplebus1 simple_mfd1: mem 0x18800-0x188ff,0x18c00-0x18c1f on simplebus1 psci0: on ofwbus0 netgate0: gic0: mem 0x1d00000-0x1d0ffff,0x1d40000-0x1d7ffff,0x1d80000-0x1d81fff,0x1d90000-0x1d91fff,0x1da0000-0x1dbffff irq 28 on simplebus1 gpio0: mem 0x13800-0x138ff,0x13c00-0x13c1f irq 29,30,31,32,33,34,35,36,37,38,39,40 on simple_mfd0 gpiobus0: on gpio0 gpio1: mem 0x18800-0x188ff,0x18c00-0x18c1f irq 41,42,43,44,45 on simple_mfd1 gpiobus1: on gpio1 gpioregulator0: on ofwbus0 a37x0-xtal0: mem 0x13800-0x138ff,0x13c00-0x13c1f on simple_mfd0 generic_timer0: irq 0,1,2,3 on ofwbus0 Timecounter "ARM MPCore Timecounter" frequency 12500000 Hz quality 1000 Event timer "ARM MPCore Eventtimer" frequency 12500000 Hz quality 1000 a37x0_tbg0: mem 0x13200-0x132ff on simplebus1 a37x0_nb_periph_driver0: mem 0x13000-0x130ff on simplebus1 a37x0_sb_periph_driver0: mem 0x18000-0x180ff on simplebus1 cpulist0: on ofwbus0 cpu0: on cpulist0 pmu0: irq 4 on ofwbus0 spi0: mem 0x10600-0x10fff irq 6 on simplebus1 iichb0: mem 0x11000-0x11023 irq 7 on simplebus1 iicbus0: on iichb0 iic0: on iicbus0 uart0: mem 0x12000-0x12017 irq 9,10,11 on simplebus1 uart0: console (115200,n,8,1) gpioc0: on gpio0 gpioc1: on gpio1 mvneta0: mem 0x30000-0x33fff irq 14 on simplebus1 mvneta0: version is 10 mdio0: on mvneta0 mdioproxy0: on mdio0 e6000sw0: on mdio0 e6000sw0: multi-chip addressing mode (0x1) e6000sw0: CPU port at 0 e6000sw0: fixed port at 0 e6000sw0: PHY at port 1 miibus0: on e6000sw0 e1000phy0: PHY 17 on miibus0 e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto e6000sw0: PHY at port 2 miibus1: on e6000sw0 e1000phy1: PHY 18 on miibus1 e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto e6000sw0: PHY at port 3 miibus2: on e6000sw0 e1000phy2: PHY 19 on miibus2 e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto e6000sw0: switch is ready. etherswitch0: on e6000sw0 mvneta0: Ethernet address: f0:ad:4e:2c:74:e7 xhci0: mem 0x58000-0x5bfff irq 16 on simplebus1 xhci0: 32 bytes context size, 32-bit DMA usbus0 on xhci0 ehci0: mem 0x5e000-0x5efff irq 17 on simplebus1 usbus1: EHCI version 1.0 usbus1 on ehci0 sdhci_xenon0: mem 0xd0000-0xd02ff,0x1e808-0x1e80b irq 25 on simplebus1 sdhci_xenon1: mem 0xd8000-0xd82ff,0x17808-0x1780b irq 26 on simplebus1 mmc0: on sdhci_xenon1 ahci0: mem 0xe0000-0xe0177 irq 27 on simplebus1 ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with FBS ahcich0: at channel 0 on ahci0 device_attach: ahcich0 attach returned 6 pcib0: mem 0xd0070000-0xd008ffff irq 5 on simplebus0 pcib0: link never came up pci0: on pcib0 gpioled0: on ofwbus0 armv8crypto0: Timecounters tick every 1.000 msec mvneta0: link state changed to UP ZFS filesystem version: 5 ZFS storage pool version: features support (5000) usbus0: 5.0Gbps Super Speed USB v3.0 usbus1: 480Mbps High Speed USB v2.0 ugen1.1: at usbus1 uhub0 on usbus1 uhub0: on usbus1 ugen0.1: at usbus0 uhub1 on usbus0 uhub1: on usbus0 spibus0: on spi0 mx25l0: at cs 0 mode 0 on spibus0 mx25l0: device type mx25u3235f, size 4096K in 64 sectors of 64K, erase size 4K mmc0: Failed to set VCCQ for card at relative address 2 mmcsd0: 8GB at mmc0 50.0MHz/8bit/65535-block mmcsd0boot0: 4MB partition 1 at mmcsd0 mmcsd0boot1: 4MB partition 2 at mmcsd0 mmcsd0rpmb: 4MB partition 3 at mmcsd0 CPU 0: ARM Cortex-A53 r0p4 affinity: 0 Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> Instruction Set Attributes 0 = Instruction Set Attributes 1 = <> Instruction Set Attributes 2 = <> Processor Features 0 = Processor Features 1 = <> Memory Model Features 0 = Memory Model Features 1 = <8bit VMID> Memory Model Features 2 = <32bit CCIDX,48bit VA> Debug Features 0 = Debug Features 1 = <> Auxiliary Features 0 = <> Auxiliary Features 1 = <> AArch32 Instruction Set Attributes 5 = AArch32 Media and VFP Features 0 = AArch32 Media and VFP Features 1 = CPU 1: ARM Cortex-A53 r0p4 affinity: 1 Release APs...Trying to mount root from zfs:pfSense/ROOT/default []... done TCP_ratelimit: Is now initialized e6000sw0port1: link state changed to DOWN e6000sw0port2: link state changed to UP e6000sw0port3: link state changed to DOWN uhub1: 2 ports with 2 removable, self powered uhub0: 1 port with 1 removable, self powered Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Warning: no time-of-day clock registered, system time will not be set accurately No suitable dump device was found. Setting hostuuid: e3720e12-2500-4645-b7ce-88e194c5dc59. Setting hostid: 0x52c97c81. Starting file system checks: Mounting local filesystems:. Generating MFS /etc partition /etc/rc.d/etcmfs: bsdlabel: not found Generating MFS /var partition /etc/rc.d/varmfs: bsdlabel: not found Setting up harvesting: [CALLOUT],[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED Feeding entropy: . /etc/rc: WARNING: $hostname is not set -- see rc.conf(5). ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/lib/engines /usr/local/lib/compat/pkg /usr/local/lib/ipsec /usr/local/lib/perl5/5.34/mach/CORE 32-bit compatibility ldconfig path: lo0: link state changed to UP Starting Network: lo0 mvneta0 enc0. lo0: flags=1008049 metric 0 mtu 16384 options=680003 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7 groups: lo nd6 options=21 mvneta0: flags=1008a02 metric 0 mtu 1500 options=bb ether f0:ad:4e:2c:74:e7 media: Ethernet 1000baseT status: active nd6 options=21 enc0: flags=0 metric 0 mtu 1536 options=0 groups: enc nd6 options=21 Starting devd. Starting Network: mvneta0. mvneta0: flags=1008a02 metric 0 mtu 1500 options=bb ether f0:ad:4e:2c:74:e7 media: Ethernet 1000baseT status: active nd6 options=21 Starting Network: enc0. enc0: flags=0 metric 0 mtu 1536 options=0 groups: enc nd6 options=21 add host 127.0.0.1: gateway lo0 fib 0: route already in table add host ::1: gateway lo0 fib 0: route already in table add net fe80::: gateway ::1 add net ff02::: gateway ::1 add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 Creating and/or trimming log files. Clearing /tmp (X related). Updating /var/run/os-release done. Updating motd:. Starting syslogd. Mounting late filesystems:. /etc/rc: WARNING: $sshguard_enable is not set properly - see rc.conf(5). Starting cron. /etc/rc: WARNING: $scponlyc_enable is not set properly - see rc.conf(5). Starting background file system checks in 60 seconds. Thu Jan 1 01:00:25 CET 1970 FreeBSD/arm64 (Amnesiac) (ttyu0) -sh: /etc/rc.initial: not found FreeBSD/arm64 (Amnesiac) (ttyu0) -sh: /etc/rc.initial: not found FreeBSD/arm64 (Amnesiac) (ttyu0) -sh: /etc/rc.initial: not found FreeBSD/arm64 (Amnesiac) (ttyu0) -sh: /etc/rc.initial: not found