Version 2.22.1285. Copyright (C) 2024 AMI BIOS Date: 02/01/2024 15:18:05 Ver: 2AZRT81 Press or to enter setup. Consoles: EFI console Reading loader env vars from /efi/freebsd/loader.env Setting currdev to disk1p1: FreeBSD/amd64 EFI loader, Revision 1.1 (Fri Nov 22 05:06:57 UTC 2024 root@freebsd) Command line arguments: loader.efi Image base: 0x539f9000 EFI version: 2.80 EFI Firmware: American Megatrends (rev 5.26) Console: efi (0x1000) Load Path: \efi\freebsd\loader.efi Load Device: PciRoot(0x0)/Pci(0x6,0x0)/Pci(0x0,0x0)/NVMe(0x1,86-36-23-00-00-3 E-69-24)/HD(1,GPT,53CBCD85-D2C0-11EF-9F64-90EC778FA2D9,0x28,0x82000) BootCurrent: 0002 BootOrder: 0002[*] 0012 000c 000e 0010 000d 0000 000f 0001 0011 0009 0013 001 4 000a BootInfo Path: HD(1,GPT,53CBCD85-D2C0-11EF-9F64-90EC778FA2D9,0x28,0x82000)/\e fi\freebsd\loader.efi Ignoring Boot0002: Only one DP found Trying ESP: PciRoot(0x0)/Pci(0x6,0x0)/Pci(0x0,0x0)/NVMe(0x1,86-36-23-00-00-3E-69 -24)/HD(1,GPT,53CBCD85-D2C0-11EF-9F64-90EC778FA2D9,0x28,0x82000) Setting currdev to disk1p1: Trying: PciRoot(0x0)/Pci(0x6,0x0)/Pci(0x0,0x0)/NVMe(0x1,86-36-23-00-00-3E-69-24) /HD(2,GPT,53CED4B0-D2C0-11EF-9F64-90EC778FA2D9,0x82028,0x400) Setting currdev to disk1p2: Trying: PciRoot(0x0)/Pci(0x6,0x0)/Pci(0x0,0x0)/NVMe(0x1,86-36-23-00-00-3E-69-24) /HD(3,GPT,53D30A2E-D2C0-11EF-9F64-90EC778FA2D9,0x82800,0x200000) Setting currdev to disk1p3: Trying: PciRoot(0x0)/Pci(0x6,0x0)/Pci(0x0,0x0)/NVMe(0x1,86-36-23-00-00-3E-69-24) /HD(4,GPT,53D7C0A3-D2C0-11EF-9F64-90EC778FA2D9,0x282800,0xDD12000) Setting currdev to zfs:pfSense/ROOT/default: Loading /boot/defaults/loader.conf Loading /boot/defaults/loader.conf Loading /boot/device.hints Loading /boot/loader.conf Loading /boot/loader.conf.lua Netgate 4200 detected. Loading /boot/loader.conf.local - | / __ _ __ / _|___ ___ _ __ ___ ___ _ | '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \ _| |_ | |_) | _\__ \ __/ | | \__ \ __/ |_ _| | .__/|_| |___/\___|_| |_|___/\___| |_| |_| ╔════ Welcome to Netgate pfSense Plus ════╗ __________________________ ║ ║ / ___\ ║ 1. Boot Multi user [Enter] ║ | /` ║ 2. Boot Single user ║ | / :-| ║ 3. Escape to loader prompt ║ | _________ ___/ /_ | ║ 4. Reboot ║ | /` ____ / /__ ___/ | ║ 5. Cons: Serial ║ | / / / / / / | ║ ║ | / /___/ / / / | ║ Options: ║ | / ______/ / / _ | ║ 6. Kernel: default/kernel (1 of 1) ║ |/ / / / _| |_ | ║ 7. Boot Options ║ / /___/ |_ _| | ║ 8. Boot Environments ║ / |_| | ║ ║ /_________________________/ ╚═════════════════════════════════════════╝ - Autoboot in 0 seconds. [Space] to pause Loading kernel... /boot/kernel/kernel text=0x1a4c98 text=0xff3048 text=0x17ed568 data=0x180+0xe80 data=0x24c808+0x3b37f8 0x8+0x1d4108+0x8+0x1e9a19 Loading configured modules... /boot/kernel/opensolaris.ko size 0x1e2a8 at 0x37be000 /boot/kernel/zfs.ko size 0x619a40 at 0x37dd000 /boot/entropy size=0x1000 can't find '/etc/hostid' staging 0x3fa00000-0x43f40000 (not copying) tramp 0x43f40000 PT4 0x43f41000 Start @ 0xffffffff803a5000 ... | Version 2.22.1285. Copyright (C) 2024 AMI BIOS Date: 02/01/2024 15:18:05 Ver: 2AZRT81 Press or to enter setup. Consoles: EFI console Reading loader env vars from /efi/freebsd/loader.env Setting currdev to disk1p1: FreeBSD/amd64 EFI loader, Revision 1.1 (Fri Nov 22 05:06:57 UTC 2024 root@freebsd) Command line arguments: loader.efi Image base: 0x539f9000 EFI version: 2.80 EFI Firmware: American Megatrends (rev 5.26) Console: efi (0x1000) Load Path: \efi\freebsd\loader.efi Load Device: PciRoot(0x0)/Pci(0x6,0x0)/Pci(0x0,0x0)/NVMe(0x1,86-36-23-00-00-3E-69-24)/HD(1,GPT,53CBCD85-D2C0-11EF-9F64-90EC778FA2D9,0x28,0x82000) BootCurrent: 0002 BootOrder: 0002[*] 0012 000c 000e 0010 000d 0000 000f 0001 0011 0009 0013 0014 000a BootInfo Path: HD(1,GPT,53CBCD85-D2C0-11EF-9F64-90EC778FA2D9,0x28,0x82000)/\efi\freebsd\loader.efi Ignoring Boot0002: Only one DP found Trying ESP: PciRoot(0x0)/Pci(0x6,0x0)/Pci(0x0,0x0)/NVMe(0x1,86-36-23-00-00-3E-69-24)/HD(1,GPT,53CBCD85-D2C0-11EF-9F64-90EC778FA2D9,0x28,0x82000) Setting currdev to disk1p1: Trying: PciRoot(0x0)/Pci(0x6,0x0)/Pci(0x0,0x0)/NVMe(0x1,86-36-23-00-00-3E-69-24)/HD(2,GPT,53CED4B0-D2C0-11EF-9F64-90EC778FA2D9,0x82028,0x400) Setting currdev to disk1p2: Trying: PciRoot(0x0)/Pci(0x6,0x0)/Pci(0x0,0x0)/NVMe(0x1,86-36-23-00-00-3E-69-24)/HD(3,GPT,53D30A2E-D2C0-11EF-9F64-90EC778FA2D9,0x82800,0x200000) Setting currdev to disk1p3: Trying: PciRoot(0x0)/Pci(0x6,0x0)/Pci(0x0,0x0)/NVMe(0x1,86-36-23-00-00-3E-69-24)/HD(4,GPT,53D7C0A3-D2C0-11EF-9F64-90EC778FA2D9,0x282800,0xDD12000) Loading /boot/defaults/loader.confT/default: Loading /boot/defaults/loader.conf Loading /boot/device.hints Loading /boot/loader.conf Loading /boot/loader.conf.lua Netgate 4200 detected. Loading /boot/loader.conf.local - | / __ _ __ / _|___ ___ _ __ ___ ___ _ | '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \ _| |_ | |_) | _\__ \ __/ | | \__ \ __/ |_ _| | .__/|_| |___/\___|_| |_|___/\___| |_| |_| ╔════ Welcome to Netgate pfSense Plus ════╗ __________________________ ║ ║ / ___\ ║ 1. Boot Multi user [Enter] ║ | /` ║ 2. Boot Single user ║ | / :-| ║ 3. Escape to loader prompt ║ | _________ ___/ /_ | ║ 4. Reboot ║ | /` ____ / /__ ___/ | ║ 5. Cons: Serial ║ | / / / / / / | ║ ║ | / /___/ / / / | ║ Options: ║ | / ______/ / / _ | ║ 6. Kernel: default/kernel (1 of 1) ║ |/ / / / _| |_ | ║ 7. Boot Options ║ / /___/ |_ _| | ║ 8. Boot Environments ║ / |_| | ║ ║ /_________________________/ ╚═════════════════════════════════════════╝ - Autoboot in 0 seconds. [Space] to pause Loading kernel... /boot/kernel/kernel text=0x1a4c98 text=0xff3048 text=0x17ed568 data=0x180+0xe80 data=0x24c808+0x3b37f8 0x8+0x1d4108+0x8+0x1e9a19 Loading configured modules... /boot/kernel/opensolaris.ko size 0x1e2a8 at 0x37be000 /boot/kernel/zfs.ko size 0x619a40 at 0x37dd000 can't find '/etc/hostid' /boot/entropy size=0x1000 staging 0x3fa00000-0x43f40000 (not copying) tramp 0x43f40000 PT4 0x43f41000 Start @ 0xffffffff803a5000 ... Version 2.22.1285. Copyright (C) 2024 AMI BIOS Date: 02/01/2024 15:18:05 Ver: 2AZRT81 Press or to enter setup. Entering Setup... A9 Aptio Setup - AMI Main Advanced Chipset Security Boot Save & Exit Firmware Update ┌────────────────────────────────────────────────────┬─────────────────────────┐ │ Save Options ▲│Exit system setup │ │ Save Changes and Exit █│without saving any │ │ Discard Changes and Exit █│changes. │ │ █│ │ │ Save Changes and Reset █│ │ │ Discard Changes and Reset █│ │ │ █│ │ │ Save Changes █│ │ │ Discard Changes █│ │ │ ░│─────────────────────────│ │ Default Options ░│→←: Select Screen │ │ Restore Defaults ░│↑↓: Select Item │ │ Save as User Defaults ░│Enter: Select │ │ Restore User Defaults ░│+/-: Change Opt. │ │ ░│F1: General Help │ │ Boot Override ░│F2: Previous Values │ │ UEFI: Built-in EFI Shell ░│F3: Optimized Defaults │ │ Fedora ▼│F4: Save & Exit │ │ │ESC: Exit │ └────────────────────────────────────────────────────┴─────────────────────────┘ Version 2.22.1285 Copyright (C) 2024 AMI AB Consoles: EFI console Reading loader env vars from /efi/freebsd/loader.env Setting currdev to disk1p1: FreeBSD/amd64 EFI loader, Revision 1.1 (Fri Nov 22 05:06:57 UTC 2024 root@freebsd) Command line arguments: loader.efi Image base: 0x53796000 EFI version: 2.80 EFI Firmware: American Megatrends (rev 5.26) Console: efi (0x1000) Load Path: \efi\freebsd\loader.efi Load Device: PciRoot(0x0)/Pci(0x6,0x0)/Pci(0x0,0x0)/NVMe(0x1,86-36-23-00-00-3E-69-24)/HD(1,GPT,53CBCD85-D2C0-11EF-9F64-90EC778FA2D9,0x28,0x82000) BootCurrent: 0002 BootOrder: 0002[*] 0012 000c 000e 0010 000d 0000 000f 0001 0011 0009 0013 0014 000a BootInfo Path: HD(1,GPT,53CBCD85-D2C0-11EF-9F64-90EC778FA2D9,0x28,0x82000)/\efi\freebsd\loader.efi Ignoring Boot0002: Only one DP found Trying ESP: PciRoot(0x0)/Pci(0x6,0x0)/Pci(0x0,0x0)/NVMe(0x1,86-36-23-00-00-3E-69-24)/HD(1,GPT,53CBCD85-D2C0-11EF-9F64-90EC778FA2D9,0x28,0x82000) Setting currdev to disk1p1: Trying: PciRoot(0x0)/Pci(0x6,0x0)/Pci(0x0,0x0)/NVMe(0x1,86-36-23-00-00-3E-69-24)/HD(2,GPT,53CED4B0-D2C0-11EF-9F64-90EC778FA2D9,0x82028,0x400) Setting currdev to disk1p2: Trying: PciRoot(0x0)/Pci(0x6,0x0)/Pci(0x0,0x0)/NVMe(0x1,86-36-23-00-00-3E-69-24)/HD(3,GPT,53D30A2E-D2C0-11EF-9F64-90EC778FA2D9,0x82800,0x200000) Setting currdev to disk1p3: Trying: PciRoot(0x0)/Pci(0x6,0x0)/Pci(0x0,0x0)/NVMe(0x1,86-36-23-00-00-3E-69-24)/HD(4,GPT,53D7C0A3-D2C0-11EF-9F64-90EC778FA2D9,0x282800,0xDD12000) Loading /boot/defaults/loader.confT/default: Loading /boot/defaults/loader.conf Loading /boot/device.hints Loading /boot/loader.conf Loading /boot/loader.conf.lua Netgate 4200 detected. Loading /boot/loader.conf.local - | / __ _ __ / _|___ ___ _ __ ___ ___ _ | '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \ _| |_ | |_) | _\__ \ __/ | | \__ \ __/ |_ _| | .__/|_| |___/\___|_| |_|___/\___| |_| |_| ╔════ Welcome to Netgate pfSense Plus ════╗ __________________________ ║ ║ / ___\ ║ 1. Boot Multi user [Enter] ║ | /` ║ 2. Boot Single user ║ | / :-| ║ 3. Escape to loader prompt ║ | _________ ___/ /_ | ║ 4. Reboot ║ | /` ____ / /__ ___/ | ║ 5. Cons: Serial ║ | / / / / / / | ║ ║ | / /___/ / / / | ║ Options: ║ | / ______/ / / _ | ║ 6. Kernel: default/kernel (1 of 1) ║ |/ / / / _| |_ | ║ 7. Boot Options ║ / /___/ |_ _| | ║ 8. Boot Environments ║ / |_| | ║ ║ /_________________________/ ╚═════════════════════════════════════════╝ - Autoboot in 0 seconds. [Space] to pause Loading kernel... /boot/kernel/kernel text=0x1a4c98 text=0xff3048 text=0x17ed568 data=0x180+0xe80 data=0x24c808+0x3b37f8 0x8+0x1d4108+0x8+0x1e9a19 Loading configured modules... /boot/kernel/zfs.ko size 0x619a40 at 0x37be000 /boot/kernel/opensolaris.ko size 0x1e2a8 at 0x3dd8000 can't find '/etc/hostid' /boot/entropy size=0x1000 staging 0x3f800000-0x43f40000 (not copying) tramp 0x43f40000 PT4 0x43f41000 Start @ 0xffffffff803a5000 ... GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb ---<>--- Copyright (c) 1992-2024 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 15.0-CURRENT #0 plus-RELENG_24_11-n256407-1bbb3194162: Fri Nov 22 05:08:46 UTC 2024 root@freebsd:/var/jenkins/workspace/pfSense-Plus-snapshots-24_11-main/obj/amd64/AKWlAIiM/var/jenkins/workspace/pfSense-Plus-snapshots-24_11-main/sources FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) VT(vga): resolution 640x480 CPU: Genuine Intel(R) Atom C1110 processor (2112.00-MHz K8-class CPU) Origin="GenuineIntel" Id=0x906a4 Family=0x6 Model=0x9a Stepping=4 Features=0xbfebfbff Features2=0x7ffafbbf AMD Features2=0x121 Structured Extended Features=0x239ca7eb Structured Extended Features2=0x984007bc Structured Extended Features3=0xfc184410 XSAVE Features=0xf IA32_ARCH_CAPS=0x188fd6b VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 3885486080 (3705 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: WARNING: L3 data cache covers more APIC IDs than a package (7 > 3) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. ioapic0 irqs 0-119 Launching APs: 2 3 1 TCP_ratelimit: Is now initialized ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff807543a0, 0) error 1 ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80754450, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80754500, 0) error 1 iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff80773fb0, 0) error 1 iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80774060, 0) error 1 iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80774110, 0) error 1 random: entropy device external interface wlan: mac acl policy registered kbd0 at kbdmux0 WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. efirtc0: efirtc0: registered as a time-of-day clock, resolution 1.000000s netgate0: netgate0: version: 0.1 vtvga0: smbios0: at iomem 0x61c66000-0x61c66017 smbios0: Version: 3.5 acpi0: acpi_ec1: port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) hpet0: iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 19200000 Hz quality 950 Event timer "HPET" frequency 19200000 Hz quality 550 Event timer "HPET1" frequency 19200000 Hz quality 440 Event timer "HPET2" frequency 19200000 Hz quality 440 Event timer "HPET3" frequency 19200000 Hz quality 440 Event timer "HPET4" frequency 19200000 Hz quality 440 atrtc1: on acpi0 atrtc1: Warning: Couldn't map I/O. atrtc1: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: at device 6.0 on pci0 pci1: on pcib1 nvme0: mem 0x67c00000-0x67c03fff at device 0.0 on pci1 xhci0: mem 0x4000040000-0x400004ffff at device 13.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: at device 18.0 (no driver attached) pci0: at device 18.7 (no driver attached) xhci1: mem 0x4000020000-0x400002ffff at device 20.0 on pci0 xhci1: 32 bytes context size, 64-bit DMA usbus1 on xhci1 usbus1: 5.0Gbps Super Speed USB v3.0 pci0: at device 20.2 (no driver attached) pci0: at device 21.0 (no driver attached) pci0: at device 21.1 (no driver attached) pci0: at device 22.0 (no driver attached) pci0: at device 25.0 (no driver attached) pci0: at device 25.1 (no driver attached) pcib2: at device 28.0 on pci0 pci2: on pcib2 pcib3: at device 28.4 on pci0 pci3: on pcib3 igc0: mem 0x67a00000-0x67afffff,0x67b00000-0x67b03fff at device 0.0 on pci3 igc0: Using 1024 TX descriptors and 1024 RX descriptors igc0: Using 1 RX queues 1 TX queues igc0: Using MSI-X interrupts with 2 vectors igc0: Ethernet address: 90:ec:77:8f:a2:d9 igc0: netmap queues/slots: TX 1/1024, RX 1/1024 pcib4: at device 28.5 on pci0 pci4: on pcib4 igc1: mem 0x67700000-0x677fffff,0x67800000-0x67803fff at device 0.0 on pci4 igc1: Using 1024 TX descriptors and 1024 RX descriptors igc1: Using 1 RX queues 1 TX queues igc1: Using MSI-X interrupts with 2 vectors igc1: Ethernet address: 90:ec:77:8f:a2:d8 igc1: netmap queues/slots: TX 1/1024, RX 1/1024 pcib5: at device 28.6 on pci0 pci5: on pcib5 igc2: mem 0x67400000-0x674fffff,0x67500000-0x67503fff at device 0.0 on pci5 igc2: Using 1024 TX descriptors and 1024 RX descriptors igc2: Using 1 RX queues 1 TX queues igc2: Using MSI-X interrupts with 2 vectors igc2: Ethernet address: 90:ec:77:8f:a2:d7 igc2: netmap queues/slots: TX 1/1024, RX 1/1024 pcib6: at device 28.7 on pci0 pci6: on pcib6 igc3: mem 0x67100000-0x671fffff,0x67200000-0x67203fff at device 0.0 on pci6 igc3: Using 1024 TX descriptors and 1024 RX descriptors igc3: Using 1 RX queues 1 TX queues igc3: Using MSI-X interrupts with 2 vectors igc3: Ethernet address: 90:ec:77:8f:a2:d6 igc3: netmap queues/slots: TX 1/1024, RX 1/1024 isab0: at device 31.0 on pci0 isa0: on isab0 pci0: at device 31.5 (no driver attached) acpi_acad0: on acpi0 ns8250: UART FCR is brokene> iomem 0xfe03e000-0xfe03e007 irq 16 on acpi0 uart2: console (115200,n,8,1) acpi_button0: on acpi0 cpu0: on acpi0 acpi_wmi0: on acpi0 acpi_wmi0: cannot find EC device acpi_wmi0: Embedded MOF found ACPI: \_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20230628/nsarguments-361) acpi_wmi1: on acpi0 acpi_wmi1: cannot find EC device acpi_wmi1: Embedded MOF found ACPI: \_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20230628/nsarguments-361) acpi_tz0: on acpi0 acpi_42000: on acpi0 atrtc0: at port 0x70 irq 8 on isa0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s atrtc0: Can't map interrupt. hwpstate_intel0: on cpu0 hwpstate_intel1: on cpu1 hwpstate_intel2: on cpu2 hwpstate_intel3: on cpu3 Timecounter "TSC" frequency 2112002922 Hz quality 1000 Timecounters tick every 1.000 msec ugen1.1: at usbus1 uhub0ugen0.1: at usbus0 on usbus1 uhub0: on usbus1 uhub1 on usbus0 uhub1: on usbus0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) nvme0: Allocated 16MB host memory buffer nda0 at nvme0 bus 0 scbus0 target 0 lun 1 nda0: nda0: Serial Number YCA12403220230364 nda0: nvme version 1.3 nda0: 114473MB (234441648 512 byte sectors) Trying to mount root from zfs:pfSense/ROOT/default []... uhub1: 3 ports with 3 removable, self powered uhub0: 16 ports with 16 removable, self powered Root mount waiting for: usbus1 Root mount waiting for: usbus1 ugen1.2: at usbus1 umass0 on uhub0 umass0: on usbus1 da0 at umass-sim0 bus 0 scbus1 target 0 lun 0 da0: Removable Direct Access SCSI device da0: Serial Number 000000225001 da0: 40.000MB/s transfers da0: 14952MB (30621696 512 byte sectors) da0: quirks=0x2 rc.bootonce_verify: ZFS support is required. Configuring crash dumps... Using /dev/nda0p3 for dump device. /dev/gpt/efiboot0: FILESYSTEM CLEAN; SKIPPING CHECKS Filesystems are clean, continuing... Mounting filesystems... Mounting ZFS boot environment...done. __ _ __ / _|___ ___ _ __ ___ ___ _ | '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \ _| |_ | |_) | _\__ \ __/ | | \__ \ __/ |_ _| | .__/|_| |___/\___|_| |_|___/\___| |_| |_| Welcome to Netgate pfSense Plus 24.11-RELEASE... Checking dump device /dev/nda0p3 for crash dumps ... no crash dumps on /dev/nda0p3. ...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/ipsec /usr/local/lib/p 32-bit compatibility ldconfig path: done. 3377 >>> Removing vital flag from php83...done. External config loader 1.0 is now starting... nda0p1 nda0p2 nda0p4 Launching the init system...Updating CPU Microcode... CPU: Genuine Intel(R) Atom C1110 processor (2112.00-MHz K8-class CPU) Origin="GenuineIntel" Id=0x906a4 Family=0x6 Model=0x9a Stepping=4 Features=0xbfebfbff Features2=0x7ffafbbf AMD Features2=0x121 Structured Extended Features=0x239ca7eb Structured Extended Features2=0x984007bc Structured Extended Features3=0xfc184410 XSAVE Features=0xf IA32_ARCH_CAPS=0x1580fd6b VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr TSC: P-state invariant, performance statistics Done. done. Initializing.................... done. Starting device manager (devd)...ig4iic0: at device 21.0 on pci0 ig4iic0: Using MSI iicbus0: on ig4iic0 iicbus0: at addr 0x14 ig4iic1: at device 21.1 on pci0 ig4iic1: Using MSI iicbus1: on ig4iic1 ig4iic2: at device 25.0 on pci0 ig4iic2: Using MSI iicbus2: on ig4iic2 ig4iic3: at device 25.1 on pci0 ig4iic3: Using MSI iicbus3: on ig4iic3 driver bug: Unable to set devclass (class: uart devname: (unknown)) driver bug: Unable to set devclass (class: atkbdc devname: (unknown)) ichsmb0: port 0xefa0-0xefbf mem 0x4000064000-0x40000640ff at device 31.4 on pci0 smbus0: on ichsmb0 done. Loading configuration...done. Updating configuration...done. Loading cryptographic accelerator drivers...aesni0: done. Setting up extended sysctls...done. Executing early shell commands...WireGuard service is disabled done. coretemp0: on cpu0 Setting timezone...done. Configuring looplo0: link state changed to UP back interface...done. Starting syslog...done. Setting up interfaces microcode...done. Configuring loopback interface...done. Configuring VLAN interfaces...done. Configuring WAN interface...done. Configuring LAN interface...done. Configuring UNIFI interface...done. Configuring IOT interface...done. Configuring FAMILY interface...done. Configuring GUEST interface...done. Configuring BACKUP interface...done. Configuring CARP settings...done. Starting Secure Shell Services...done. Syncing OpenVPN settings...done. Configuring firewall......done. Starting PFLOG...done. Setting up gateway monitors...done. Setting up static routes...done. Setting up DNSs... Starting DNS Resolver...done. Synchronizing user settings...done. Configuring CRON...done. Bootstrapping clock...done. Starting NTP Server...done. Starting webConfigurator...done. pkill: Cannot get process list (kvm_getprocs: No such process) Starting DHCP service...done. Configuring firewall......done. Generating RRD graphs...done. Starting syslog...pkill: Cannot open pidfile `/var/run/syslog.pid': No such file or directory done. Starting CRON... done. Starting package AWS VPC Wizard...done. Starting package IPsec Profile Wizard...done. Starting package Netgate Firmware Upgrade...done. Starting package WireGuard...done. Netgate pfSense Plus 24.11-RELEASE amd64 20241122-0434 Bootup complete Performing automatic boot verification...done. FreeBSD/amd64 (pfsense.devan.guru) (ttyu2) Netgate 4200 - Serial: 2024241113 - Netgate Device ID: abf8828cadd91ecba929 *** Welcome to Netgate pfSense Plus 24.11-RELEASE (amd64) on pfsense *** Current Boot Environment: default Next Boot Environment: default WAN (wan) -> igc3 -> LAN (opt1) -> igc0.51 -> v4: 172.20.1.1/24 UNIFI (opt2) -> igc0.61 -> v4: 172.20.61.1/24 IOT (opt3) -> igc0.101 -> v4: 172.20.101.1/24 FAMILY (opt4) -> igc0.201 -> v4: 172.20.201.1/24 GUEST (opt5) -> igc0.301 -> v4: 172.30.2.1/24 BACKUP (opt6) -> igc1 -> v4: 172.20.6.1/24 0) Logout / Disconnect SSH 9) pfTop 1) Assign Interfaces 10) Filter Logs 2) Set interface(s) IP address 11) Restart GUI 3) Reset admin account and password 12) PHP shell + Netgate pfSense Plus tools 4) Reset to factory defaults 13) Update from console 5) Reboot system 14) Disable Secure Shell (sshd) 6) Halt system 15) Restore recent configuration 7) Ping host 16) Restart PHP-FPM 8) Shell Enter an option: 6 Netgate pfSense Plus will shutdown and halt system. This may take a few minutes, depending on your hardware. Do you want to proceed [y|n]? y Netgate pfSense Plus will shutdown and halt system now. Netgate 4200 - Serial: 2024241113 - Netgate Device ID: abf8828cadd91ecba929 *** Welcome to Netgate pfSense Plus 24.11-RELEASE (amd64) on pfsense *** Current Boot Environment: default Next Boot Environment: default WAN (wan) -> igc3 -> LAN (opt1) -> igc0.51 -> v4: 172.20.1.1/24 UNIFI (opt2) -> igc0.61 -> v4: 172.20.61.1/24 IOT (opt3) -> igc0.101 -> v4: 172.20.101.1/24 FAMILY (opt4) -> igc0.201 -> v4: 172.20.201.1/24 GUEST (opt5) -> igc0.301 -> v4: 172.30.2.1/24 BACKUP (opt6) -> igc1 -> v4: 172.20.6.1/24 0) Logout / Disconnect SSH 9) pfTop 1) Assign Interfaces 10) Filter Logs 2) Set interface(s) IP address 11) Restart GUI 3) Reset admin account and password 12) PHP shell + Netgate pfSense Plus tools 4) Reset to factory defaults 13) Update from console 5) Reboot system 14) Disable Secure Shell (sshd) 6) Halt system 15) Restore recent configuration 7) Ping host 16) Restart PHP-FPM 8) Shell Enter an option: Netgate pfSense Plus is now shutting down ... net.inet.carp.allow: 0 -> 0 pflog0: promiscuous mode disabled Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 0 0 0 0 0 done All buffers synced. Uptime: 2m41s umass0: detached uhub0: detached uhub1: detached Version 2.22.1285. Copyright (C) 2024 AMI BIOS Date: 02/01/2024 15:18:05 Ver: 2AZRT81 Press or to enter setup. Consoles: EFI console Reading loader env vars from /efi/freebsd/loader.env Setting currdev to disk1p1: FreeBSD/amd64 EFI loader, Revision 1.1 (Fri Nov 22 05:06:57 UTC 2024 root@freebsd) Command line arguments: loader.efi Image base: 0x539f9000 EFI version: 2.80 EFI Firmware: American Megatrends (rev 5.26) Console: efi (0x1000) Load Path: \efi\freebsd\loader.efi Load Device: PciRoot(0x0)/Pci(0x6,0x0)/Pci(0x0,0x0)/NVMe(0x1,86-36-23-00-00-3E-69-24)/HD(1,GPT,53CBCD85-D2C0-11EF-9F64-90EC778FA2D9,0x28,0x82000) BootCurrent: 0002 BootOrder: 0002[*] 0012 000c 000e 0010 000d 0000 000f 0001 0011 0009 0013 0014 000a BootInfo Path: HD(1,GPT,53CBCD85-D2C0-11EF-9F64-90EC778FA2D9,0x28,0x82000)/\efi\freebsd\loader.efi Ignoring Boot0002: Only one DP found Trying ESP: PciRoot(0x0)/Pci(0x6,0x0)/Pci(0x0,0x0)/NVMe(0x1,86-36-23-00-00-3E-69-24)/HD(1,GPT,53CBCD85-D2C0-11EF-9F64-90EC778FA2D9,0x28,0x82000) Setting currdev to disk1p1: Trying: PciRoot(0x0)/Pci(0x6,0x0)/Pci(0x0,0x0)/NVMe(0x1,86-36-23-00-00-3E-69-24)/HD(2,GPT,53CED4B0-D2C0-11EF-9F64-90EC778FA2D9,0x82028,0x400) Setting currdev to disk1p2: Trying: PciRoot(0x0)/Pci(0x6,0x0)/Pci(0x0,0x0)/NVMe(0x1,86-36-23-00-00-3E-69-24)/HD(3,GPT,53D30A2E-D2C0-11EF-9F64-90EC778FA2D9,0x82800,0x200000) Setting currdev to disk1p3: Trying: PciRoot(0x0)/Pci(0x6,0x0)/Pci(0x0,0x0)/NVMe(0x1,86-36-23-00-00-3E-69-24)/HD(4,GPT,53D7C0A3-D2C0-11EF-9F64-90EC778FA2D9,0x282800,0xDD12000) Loading /boot/defaults/loader.confT/default: Loading /boot/defaults/loader.conf Loading /boot/device.hints Loading /boot/loader.conf Loading /boot/loader.conf.lua Netgate 4200 detected. Loading /boot/loader.conf.local - | / __ _ __ / _|___ ___ _ __ ___ ___ _ | '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \ _| |_ | |_) | _\__ \ __/ | | \__ \ __/ |_ _| | .__/|_| |___/\___|_| |_|___/\___| |_| |_| ╔════ Welcome to Netgate pfSense Plus ════╗ __________________________ ║ ║ / ___\ ║ 1. Boot Multi user [Enter] ║ | /` ║ 2. Boot Single user ║ | / :-| ║ 3. Escape to loader prompt ║ | _________ ___/ /_ | ║ 4. Reboot ║ | /` ____ / /__ ___/ | ║ 5. Cons: Serial ║ | / / / / / / | ║ ║ | / /___/ / / / | ║ Options: ║ | / ______/ / / _ | ║ 6. Kernel: default/kernel (1 of 1) ║ |/ / / / _| |_ | ║ 7. Boot Options ║ / /___/ |_ _| | ║ 8. Boot Environments ║ / |_| | ║ ║ /_________________________/ ╚═════════════════════════════════════════╝ - Autoboot in 0 seconds. [Space] to pause Loading kernel... /boot/kernel/kernel text=0x1a4c98 text=0xff3048 text=0x17ed568 data=0x180+0xe80 data=0x24c808+0x3b37f8 0x8+0x1d4108+0x8+0x1e9a19 Loading configured modules... /boot/kernel/zfs.ko size 0x619a40 at 0x37be000 can't find '/etc/hostid' /boot/kernel/opensolaris.ko size 0x1e2a8 at 0x3dd8000 /boot/entropy size=0x1000 staging 0x3fa00000-0x43f40000 (not copying) tramp 0x43f40000 PT4 0x43f41000 Start @ 0xffffffff803a5000 ... |