• Multi-subnet routing config

    Locked
    4
    0 Votes
    4 Posts
    8k Views
    H
    You need the following routes: at Router A: Interface LAN; subnet 192.168.4.0/24; Gateway 192.168.3.1 Interface LAN; subnet 192.168.2.0/24; Gateway 192.168.3.1 Router pfSense: Interface LAN; subnet 192.168.4.0/24; Gateway 192.168.1.1 Interface LAN; subnet 192.168.2.0/24; Gateway 192.168.1.1 Router B doesn't need any routes as the default GW of this one is Router A btw, why is there a GW at your OPT1 at Router B? You only need this if this is an additional WAN and besides that the gateway isn't in the range of the OPT1-subnet. This doesn't make sense. Delete the gateway there  ;D
  • Multible subnets on pfsense?

    Locked
    17
    0 Votes
    17 Posts
    20k Views
    B
    by the way, i forgot to mention that this is not a office network, but 500 apartments and groving, that are sharing the same internet connection, together with cheap telephone, and cheap tv here in denmark when we began to make this network, be did a lot of thinking about the structure before we implemented it, and i think today, we are happy with our subnetting, cause we get bigger and bigger with more apartments all the time, so its nice to have done things the right way from scratch. anyway thanks for the replyes sincerely Carsten www.sundbynet.dk
  • Dsl and two wifi lans

    Locked
    4
    0 Votes
    4 Posts
    5k Views
    H
    Here is how I would do it: settings at your pfsense: make rl0 WAN with static config using the LAN IP of your DSL router as gateway make ral0 LAN enable DHCP Server at LAN and configure it correctly enable "advanced outbound nat" at firewall>nat>outbound and delete all rules after you enabled and saved (this way you are routing and don'T NAT any more) create a rule at WAN to allow access from your dslrouters LAN-subnet if you want to shut down access for the wifi hosts of your pfsense to your dsl-routers LAN subnet add a rule to block access from source any to destination dsl-routers lansubnet at the lan tab of the pfsense. place this rule above the "default lan to any" rule. settings at the dsl-router: add a static route for the wifi subnet of the pfsense with gateway wan ip of your pfsense
  • Trouble with Dual WAN

    Locked
    7
    0 Votes
    7 Posts
    9k Views
    O
    Thank you very much for answering my questions billm.  I'll try sticking 2 routers inbetween the modems and the pfsense box.  I'll let you know how everything works out.   ;D
  • Load Balancing

    Locked
    6
    0 Votes
    6 Posts
    8k Views
    Z
    I disable ftp helper but it didnt work properly, the work around I did was to only load balance my 80 and my 119 everything else through one of the wans.
Copyright 2026 Rubicon Communications LLC (Netgate). All rights reserved.