Vmware Pfsense Issue
-
HI This is sachin
i am new user of pfsense
i have install pfsense 2.0 on my windows server 2008 i have use Oracle virtual box, my installation has done.
i have 1 issuemy ISP has provide me 4 public ip i want use 1 public ip on my PFSENSE Vm currently wan ip is 192.168.1.27 DHCP IP i have attche Pfsense 1 file.
i want to use pfsense outside plus i have webserver on of local ip plus ftp server also want to access outside i don't know how to do NAT Rule, where i can set public ip so i can get my Pfsense box outside.
i have set 3 lan card on my vm 1 is bridge adapter 2 bridge adapter 3 Internal Network…................(may be i have set wrong setup)Thanks in advance.
Please help how to set this
-
Hello!
You need to explain yourself a bit better if you want help.
And also your title say vmware and you are using virtual box.
Maybe draw a little diagram of what you are trying to achieve.
Im trying to understand the setup you described above:WAN –-> Win2008 Host machine 1 single NW interface
|
-> Pfsense virtual box machine 1st bridged NW interface --> pfsense -> internal NW interface --> Webserver virtual box machine?
| ^ | --> ftpserver virtual box machine?
-> Pfsense virtual box machine 2nd bridged NW interface |This is how I read your post.
Why do you have 2 bridged interfaces in pfsense?
All 3 (win2008, pfsense1 and 2) will get a public IP.Remove the second bridged interface in pfsense.
Make sure you have set the local servers to internal networking on the same internal network as pfsense./illern
-
Maybe this is the setup you are after?
http://forum.pfsense.org/index.php/topic,53469.0/topicseen.html
If that´s case then look at post no3 for the setup.