Need to block FTP from LAN to WAN (simple but not working…)
-
Hello,
I need to block FTP from LAN to WAN. I have 3 WANs acting as load balancing via a Gateway group.
So, I created a firewall rule blocking port 21 from LAN to any, but… It does not work (users can still connect via FTP).
How can I check the logs only for this rule?
I haven't restart the box, though due to production hours.
I have attached an image of my rule.
Thanks!
-
Specifying a source port is almost always a mistake, and in your case it is. Leave the source port as "any."
-
Thank you, I will try it.
What about the log? I need to see the log only for this rule if possible.
Best regards
Kostas
-
The logging is fine as is.
-
Thank you,
I know logging is fine, but I got difficulties to watch the logs for a specific rule.
I go to Diagnostics > System Logs > Firewall > Dynamic view, but I cannot see what rule is applied to each log.
Any help will be appreciated.
Kostas
-
Under the "ACT" column you'll see a green or red icon, clicking it will tell you what caused that action.
-
Thank you!
But how to distinguish to which rule is applied?
Best regards
Kostas
-
click the green or red icon and it'll show you which rule was applied.