Pfsense blocking portforwarded traffic on OPT interface
-
Hi all,
Yesterday I made a new DMZ interface on Pfsense 2.2.5. Added a Default allow any rule for testing, portforwarded the needed port. But it is still being blocked by Pfsense. I can access the internet just fine from the server where the ports should be redirected to.
I tested the portforward via canyouseeme.org . This method works just fine for checking portforwards on lan.
Port forwards to the LAN interface work just fine. Tried to create a new one, and it worked immediately.
Why does my portforward not work?
-
Why does my portforward not work?
In Firewall Rules WAN you need: IPv4* * * 192.168.3.10 9987 * none
-
@hda:
Why does my portforward not work?
In Firewall Rules WAN you need: IPv4* * * 192.168.3.10 9987 * none
Thanks for your reply. That rule was automatically created by creating a NAT rule. I added a screenshot with the rule now :) .
-
What do you need (ports, protocol)? UDP ? TCP ?
-
-
The blocks show TCP…? Testing: start off broad (IPv4*), then narrow down (UDP and/or TCP, port(s)).
-
@hda:
The blocks show TCP…? Testing: start off broad (IPv4*), then narrow down (UDP and/or TCP, port(s)).
Feeling very stupid now. Checked my rules and saw an old rule matching my old teamspeak server on LAN… Removed and it works now. Sorry!