[SOLVED] How to disable web interface on OVPN client interface

KOM

Shouldn't your block rule be on the OpenVPN interface as well as the LAN interface?

graymattr

Ahh yes, I totally forget to include that. Apologies. Here's the rule I have on the OpenVPN interface.

EDIT: The OpenVPN interface is for the server, the one shown is the client. Just realized that might be confusing.

![Screen Shot 2016-02-20 at 2.01.25 PM.png](/public/imported_attachments/1/Screen Shot 2016-02-20 at 2.01.25 PM.png)
![Screen Shot 2016-02-20 at 2.01.25 PM.png_thumb](/public/imported_attachments/1/Screen Shot 2016-02-20 at 2.01.25 PM.png_thumb)

KOM

I'm still unclear. Your OpenVPN interface is to allow pfSense to connect to some external VPN service, and the SONICVPN interface lets your external clients connect to your pfSense? Did you clear all states before running your tests?

graymattr

Sorry, no, it's the other way around. Sonicvpn is the client (facing outward), OpenVPN is the server (for remoting in).

What do you mean by clear all stats? I set the rules, reload them, and then test from an external network (via browser and nmap). Is there another step I am missing?

Cheers

KOM

Sonicvpn is the client (facing outward), OpenVPN is the server (for remoting in).

And who is able to reach your WebGUI, your OpenVPN remote users? If so, the rule should be on the OpenVPN interface, not the Sonic.

What do you mean by clear all stats?

Existing states don't get torn down with a firewall rule change. Go to Diagnostics - States and clear/reset them (or filter for specific states and just clear those), then try your test again.

graymattr

The GUI is reachable on the client (Sonic) IP address (which is where the rule I posted is). Thanks for the tip about states, I didn't realize that and I'll make sure I clear/reset those on firewall changes. Maybe that's the issue…

EDIT: Cleared all states, no change. I'll keep fiddling my rules unless anyone has any other ideas. The good news is that these rules are preventing GUI access on my WAN (non VPN'd) IP. Halfway there.

graymattr

Would it make more sense/work if I set this up as a floating rule? I was thinking I could allow on the LAN interfact from my 192.168.0.0/24 network as a top rule, and then reject any from LAN/WAN/SONICVPN.

Am I understanding floating rules that they are matched before interface rules, and in order? Thanks so much!

KOM

Floating rules are typically used for traffic shaping.

graymattr

Ahh, ok. I'll stick with the per interface variety. I'm developing a bruise from all of the banging my head on this one. :)

graymattr

I found it. I had a rule on the OpenVPN interface (that was labeled "Rule via Wizard" or similar, so I didn't pay much attention to it) that was passing *. I might have broken my OpenVPN Server config temporarily, but I've secured the web GUI from the VPN client VIP, which is want I was trying to do. I can re-add server rules that are less permissive over time.

Thanks so much to KOM for the help. Sorry for being a bonehead. :)

Hope this helps someone else.