Pfsense web configuration problem
-
Hi friends,
I had dona a installation and configuration of pfsense 2.1(i368). it's working fine but further initial configurations are like DNS, IP assigning, interface assigning.. almost completed.
my problem :
I have ask my problems are in my questions
1. LAN to WAN not Communicating
2. WAN to LAN not communicating..
3. When i go to package option on the system menu
Error shows like : "Unable to communicate with www.pfsense.com. Please verify DNS and interface configuration, and that pfSense has functional Internet connectivity. "
please help me friend. thank you
-
Hi friends,
I had dona a installation and configuration of pfsense 2.1(i368). it's working fine but further initial configurations are like DNS, IP assigning, interface assigning.. almost completed.
my problem :
I have ask my problems are in my questions
1. LAN to WAN not Communicating
2. WAN to LAN not communicating..
3. When i go to package option on the system menu
Error shows like : "Unable to communicate with www.pfsense.com. Please verify DNS and interface configuration, and that pfSense has functional Internet connectivity. "
please help me friend. thank you
This is my settings
where pfsense stacture like : "ISP <=> MODEM <=> WAN <=> pfsense <=> LAN <=> switch"
ISP : Static IP :183...32
WAN : 192..1 to 192...254 (Using DHCP)
LAN : 192...1 to 192..*.254 (Using Static /Not using DHCP )
I'm beginner of the pfsense, i googled the how to setup & configuration of pfsense, but i could not implement the my network settings.
I have mention above the my pfsense stacture network settings.
please reply me …...
-
The upstream modem on WAN is already using 192.168.1.0/24 subnet.
That is also the default for pfSense LAN. So change pfSense LAN to some other subnet in private IPv4 address space,
e.g. make the pfSense LAN IP 192.168.2.1/24
And change the DHCP on LAN to a range in 192.168.2.* -
Hi
First Thank you for your response. I will modify the configuration you suggestion.. let you know quickly …
I'm beginner for pfsense. so only asking this type of questions. please help me
Currently running my LAN network : 192.168.2./24 (without DHCP) and WAN network :192.168.1./24 (with DHCP).
how to change LAN to some other network ?
once change my lan to some other network weather what are all the change made my hole settings
please give step by step details …..
thanks... :) :-\ ::)
-
If you have a static IP from your ISP, I really think you should not use a 192.168 address on your WAN. Instead, call your ISP and ask them to change your modem to a pass-through device that does not do any routing or NAT. It should be a plain, dumb modem. They usually call it "bridge mode". That way, your pfSense WAN interface can be assigned the static IP and gateway for your ISP and you can use any 192.168 address you want for your LAN.