Routing between DMZ and LAN
-
Hi there,
I have a pfsense setup as below:
WAN: 192.168.1.1
DMZ: 172.16.200.1
LAN: 172.16.100.1For testing purpose, I have two rules, one in LAN and one in DMZ to allow ICMP
I can only ping within LAN and LAN to pfsense 172.16.100.1
I can not ping from DMZ to DMZ's pfsense interface 172.16.200.1Eventually, I like to allow certain traffic between DMZ and LAN.
How I can do so?Thanks,
-
Check the DMZ interface settings for
- the correct network mask
- if "block private networks" is checked
Also check the network settings on the DMZ computer.
-
Resolved.
One of the rule was set incorrectly.
Thanks.