Rules Don't Seem To Be Working
-
My inbound rules (WAN to LAN) work perfectly, but I have a few outbound (?) rules that I've added which are seemingly ignored. I would like to allow all traffic from 192.168.1.4 (Nvidia Shield TV) to send/receive data on blocked ports that keep showing up in my logs, I used the Easy Rule option to add pass rules but they don't seem to be working. Also since there are a lot of ports that I'd like to unblock I decided to create an any rule for it, but it still doesn't seem to work. I have UPNP enabled and it works becauseother hosts use it, but the Shield doesn't seem to make us of it.
Here's an example from the firewall logs which is blocked:
Nov 28 14:31:20 LAN 192.168.1.4:56280 64.233.177.95:443 TCP:PAHere's a rule that I added (which is at the top of the LAN list):
IPv4 TCP 192.168.1.4 * * * * noneSo can someone explain why this is still getting blocked, even after it has been applied and the rule is active?
-
https://doc.pfsense.org/index.php/Why_do_my_logs_show_%22blocked%22_for_traffic_from_a_legitimate_connection
https://doc.pfsense.org/index.php/Firewall_Rule_Basics
https://doc.pfsense.org/index.php/Firewall_Rule_Processing_Order
https://doc.pfsense.org/index.php/Firewall_Rule_Troubleshooting
-
TCP:PA
Out of STATE..