I want to setup Site to Site VPN using PF sense and Sonicwall.
-
Hello Everyone
I need your help in setting up of Site to Site VPN using PF sense and Sonicwall.
I have one site which uses Sonicwall and another site uses PF sense which I have recently installed.
I followed all the steps which was mentioned on the article https://doc.pfsense.org/index.php/Routing_internet_traffic_through_a_site-to-site_IPsec_tunnel till IP sec phase 2.
There is something which I am missing please let me know its important for me Also I would request you to please have a look at these images these images contain the setting which I applied on PF Sense.These are the configuration of my PF sense please have a look and let me know if I am missing anything.
http://imgur.com/a/oEjkz -
Looking through your screenshots, I saw an error. Under General Information for the Phase 2 settings.
You have for the local Network 0.0.0.0 /24
When it should be 0.0.0.0 /0 to route all traffic from the remote network to the pfsense box.