Pfsense 2.3.1 Squid Transparan Mod SSL
-
tabiki sertifika uyarısı sorunu değil bu.
örnek ;
Date IP Status Address User Destination
23.07.2016 11:37:04 192.168.1.239 TAG_NONE/200 216.58.209.14:443 - -
23.07.2016 11:37:03 192.168.1.234 TAG_NONE/200 143.127.102.87:443 - -
23.07.2016 11:37:03 192.168.1.234 TAG_NONE/200 143.127.102.87:443 - - -
Bu şekilde squid de kalıyorum
URL adresine erişilmeye çalışıyorken hata meydana geldi: https://http/*
«http» isimli sunucuya ait herhangi bir IP adresi bulunamadı.
DNS sunucusundan gelen cevap:
Name Error: The domain name does not exist.
This means that the cache was not able to resolve the hostname presented in the URL. Check if the address is correct.
-
Merhaba.
Bu konu çözüm bulabildiniz mi? Bende aynı hata ile bayadır uğraşıyorum.
-
SSL filtrelemeyi mecburi olarak kapattım.
henüz bir çözüm bulamadım. -
Merhabalar.
SSL filtreleme için gerekli ayarlamaları yaptıktan sonra squidguard>common ACL altında ki Do not Allos IP address in URL seçeneği işaretliyse kaldırabilir misiniz? Bu seçeneği kaldırdığımda sorun düzeliyor.
-
maalesef benim testimde sorun devam ediyor. Sonuç bu çözüm olumsuz
-
Wpad kullanıyormusunuz ?
-
-
hayır
Note: Transparent mode will filter SSL (port 443) if you enable man-in-the-middle options below.
In order to proxy both HTTP and HTTPS protocols without intercepting SSL connections, configure WPAD/PAC options on your DNS/DHCP servers.WPAD/PAC olmadan düzenli bir https/ssl filtreleme elde edemezsiniz.
-
hayır
Note: Transparent mode will filter SSL (port 443) if you enable man-in-the-middle options below.
In order to proxy both HTTP and HTTPS protocols without intercepting SSL connections, configure WPAD/PAC options on your DNS/DHCP servers.WPAD/PAC olmadan düzenli bir https/ssl filtreleme elde edemezsiniz.
Güncelleme yapana kadar sorunsuz çalışıyordu bizde. Transparan olarak 443 de gayet güzel süzülüyordu..