<![CDATA[NUT package under pfSense 2.3.2: Status and configuration page not accessible]]>I have installed pfSense 2.3.2 (fresh installation, full installation on mSATA, amd64) on an apu1d4. After the import of my 2.2.6 configuration I reinstalled the NUT package. The NUT package is obviosuly installed correctly and can be started and stopped from the dashboard.

When I try to access NUT via "Services -> NUT" I obtain

404 Not Found

This means I can make no longer any changes to the NUT configuration.

]]>https://forum.netgate.com/topic/103297/nut-package-under-pfsense-2-3-2-status-and-configuration-page-not-accessibleRSS for NodeSun, 12 Apr 2026 10:05:51 GMTTue, 26 Jul 2016 17:04:28 GMT60<![CDATA[Reply to NUT package under pfSense 2.3.2: Status and configuration page not accessible on Sun, 04 Sep 2016 09:10:29 GMT]]>Thanks dennypage, config file edited successfully.

]]>https://forum.netgate.com/post/647717https://forum.netgate.com/post/647717Sun, 04 Sep 2016 09:10:29 GMT<![CDATA[Reply to NUT package under pfSense 2.3.2: Status and configuration page not accessible on Sat, 03 Sep 2016 14:13:40 GMT]]>https://forum.pfsense.org/index.php?topic=115349.msg650408#msg650408

]]>https://forum.netgate.com/post/647641https://forum.netgate.com/post/647641Sat, 03 Sep 2016 14:13:40 GMT<![CDATA[Reply to NUT package under pfSense 2.3.2: Status and configuration page not accessible on Sat, 03 Sep 2016 13:47:47 GMT]]>Hi, I just upgraded my pfsense box from 2.3.1_5 to 2.3.2 and I got same issue with NUT.
I uninstalled the NUT package and reinstalled it to get it working again.

BUT: un the Services Tab, I now have 2 entries: NUT (old one that brings me a 404 error) and UPS the actual ups setup page.

Do you know how can I remove the old NUT entry of the Services menu ?

Thanks.

]]>https://forum.netgate.com/post/647640https://forum.netgate.com/post/647640Sat, 03 Sep 2016 13:47:47 GMT<![CDATA[Reply to NUT package under pfSense 2.3.2: Status and configuration page not accessible on Wed, 10 Aug 2016 18:07:21 GMT]]>@pvoigt:

Currently I am very happy with the new NUT package.

Good to hear, thanks!

]]>https://forum.netgate.com/post/643161https://forum.netgate.com/post/643161Wed, 10 Aug 2016 18:07:21 GMT<![CDATA[Reply to NUT package under pfSense 2.3.2: Status and configuration page not accessible on Wed, 10 Aug 2016 18:02:11 GMT]]>I have just upgraded to NUT 2.7.4_2 package without any issues. A prior deinstallation was not neccessary. Configuration was automatically converted to the new version. I just had to confirm the auto-conversion.

The dashboard UPS widget, however, was automatically removed. But it could be installed again.

I should mention, that my pfSense machine is not the NUT master of my UPS.

Currently I am very happy with the new NUT package.

]]>https://forum.netgate.com/post/643159https://forum.netgate.com/post/643159Wed, 10 Aug 2016 18:02:11 GMT<![CDATA[Reply to NUT package under pfSense 2.3.2: Status and configuration page not accessible on Tue, 09 Aug 2016 14:21:22 GMT]]>using the command line from the other thread to completely remove, then reinstalling with the _2 package, all is well.  Thanks.
Nice detail on the settings page as far parameters being seen.

]]>https://forum.netgate.com/post/642908https://forum.netgate.com/post/642908Tue, 09 Aug 2016 14:21:22 GMT<![CDATA[Reply to NUT package under pfSense 2.3.2: Status and configuration page not accessible on Tue, 09 Aug 2016 07:24:09 GMT]]>Glad you got it sorted. Btw, there is an info link for the package. It shows up as an i in a circle in the package manager. This thread has information on the package that might be helpful.

]]>https://forum.netgate.com/post/642843https://forum.netgate.com/post/642843Tue, 09 Aug 2016 07:24:09 GMT<![CDATA[Reply to NUT package under pfSense 2.3.2: Status and configuration page not accessible on Tue, 09 Aug 2016 07:07:16 GMT]]>Ok, got it figured out.  I had to do a full uninstall/reinstall, then realize that the name of the service in Services changed from NUT to UPS, then had to visit Services | UPS and review the settings and accept the changes to accommodate version changes to the settings.  The service was then able to start and all seems to be working now.

]]>https://forum.netgate.com/post/642842https://forum.netgate.com/post/642842Tue, 09 Aug 2016 07:07:16 GMT<![CDATA[Reply to NUT package under pfSense 2.3.2: Status and configuration page not accessible on Tue, 09 Aug 2016 06:49:59 GMT]]>I'm on pfSense 2.3.2, I did an update to NUT package 2.7.4_1.  The service wouldn't start and the NUT services page didn't appear in the Services drop-down menu.  This evening I updated to the NUT 2.7.4_2 package and am having the same problems, even following a service reinstall.

]]>https://forum.netgate.com/post/642840https://forum.netgate.com/post/642840Tue, 09 Aug 2016 06:49:59 GMT<![CDATA[Reply to NUT package under pfSense 2.3.2: Status and configuration page not accessible on Mon, 08 Aug 2016 12:07:12 GMT]]>Thanks for the update and for fixing the issue.

]]>https://forum.netgate.com/post/642625https://forum.netgate.com/post/642625Mon, 08 Aug 2016 12:07:12 GMT<![CDATA[Reply to NUT package under pfSense 2.3.2: Status and configuration page not accessible on Mon, 08 Aug 2016 11:12:28 GMT]]>It's all fixed now and tagged with 2.7.4_2

]]>https://forum.netgate.com/post/642617https://forum.netgate.com/post/642617Mon, 08 Aug 2016 11:12:28 GMT<![CDATA[Reply to NUT package under pfSense 2.3.2: Status and configuration page not accessible on Mon, 08 Aug 2016 05:16:01 GMT]]>@abauer:

I just upgraded from 2.3.1_5 to 2.3.2 (Community Edition) and have the same issue. ups_status.php returns 404 not found.

I have uninstalled and then reinstalled nut 2.7.4_1
This did not resolve the issue.

Perhaps the error "XML error: PKGINFOLINK at line 8 cannot occur more than once" shown in the installation log below is a relevant clue.

As noted in other threads, 2.7.4_1 from the community and factory package servers are corrupt and will not install. The version from the beta package server is correct. I expect that the community and factory packages will be fixed as soon as someone is available on Monday.

If you have a critical need to install the package before then, you can PM me with an email address and I will send you a copy of the package.

]]>https://forum.netgate.com/post/642557https://forum.netgate.com/post/642557Mon, 08 Aug 2016 05:16:01 GMT<![CDATA[Reply to NUT package under pfSense 2.3.2: Status and configuration page not accessible on Mon, 08 Aug 2016 01:44:14 GMT]]>Same here.  No service showing in dropdown and although UPS widget is available show the "Monitoring is not Enabled"

From the reinstall:

Installed packages to be REINSTALLED:
pfSense-pkg-nut-2.7.4_1 [pfSense]

Number of packages to be reinstalled: 1
[1/1] Reinstalling pfSense-pkg-nut-2.7.4_1…
[1/1] Extracting pfSense-pkg-nut-2.7.4_1: …....... done
The nut package is not installed.

Deletion aborted.XML error: PKGINFOLINK at line 8 cannot occur more than once

Cleaning up cache... done.
Success

Package shows installed in the dashboard??

]]>https://forum.netgate.com/post/642551https://forum.netgate.com/post/642551Mon, 08 Aug 2016 01:44:14 GMT<![CDATA[Reply to NUT package under pfSense 2.3.2: Status and configuration page not accessible on Sun, 07 Aug 2016 22:03:34 GMT]]>I just upgraded from 2.3.1_5 to 2.3.2 (Community Edition) and have the same issue. ups_status.php returns 404 not found.

I have uninstalled and then reinstalled nut 2.7.4_1
This did not resolve the issue.

Perhaps the error "XML error: PKGINFOLINK at line 8 cannot occur more than once" shown in the installation log below is a relevant clue.


>>> Installing pfSense-pkg-nut... 
Updating pfSense-core repository catalogue...
pfSense-core repository is up-to-date.
Updating pfSense repository catalogue...
pfSense repository is up-to-date.
All repositories are up-to-date.
The following 4 package(s) will be affected (of 0 checked):

New packages to be INSTALLED:
	pfSense-pkg-nut: 2.7.4_1 [pfSense]
	nut: 2.7.4 [pfSense]
	neon: 0.30.1 [pfSense]
	net-snmp: 5.7.3_11 [pfSense]

Number of packages to be installed: 4

The process will require 17 MiB more space.
1 MiB to be downloaded.
Fetching nut-2.7.4.txz: .......... done
Fetching neon-0.30.1.txz: .......... done
Checking integrity... done (0 conflicting)
[1/4] Installing neon-0.30.1...
[1/4] Extracting neon-0.30.1: .......... done
[2/4] Installing net-snmp-5.7.3_11...
[2/4] Extracting net-snmp-5.7.3_11: .......... done
[3/4] Installing nut-2.7.4...
[3/4] Extracting nut-2.7.4: .......... done
[4/4] Installing pfSense-pkg-nut-2.7.4_1...
[4/4] Extracting pfSense-pkg-nut-2.7.4_1: .......... done
XML error: PKGINFOLINK at line 8 cannot occur more than once
Message from net-snmp-5.7.3_11:
**** This port installs snmpd, header files and libraries but does not
     start snmpd by default.
     If you want to auto-start snmpd and snmptrapd:, add the following to
     /etc/rc.conf:

	snmpd_enable="YES"
	snmpd_flags="-a"
	snmpd_conffile="/usr/local/share/snmp/snmpd.conf /etc/snmpd.conf"
	snmptrapd_enable="YES"
	snmptrapd_flags="-a -p /var/run/snmptrapd.pid"

**** You may also specify the following make variables:

	NET_SNMP_SYS_CONTACT="zi@FreeBSD.org"
	NET_SNMP_SYS_LOCATION="USA"
	DEFAULT_SNMP_VERSION=3
	NET_SNMP_MIB_MODULES="host smux mibII/mta_sendmail ucd-snmp/diskio"
	NET_SNMP_LOGFILE=/var/log/snmpd.log
	NET_SNMP_PERSISTENTDIR=/var/net-snmp

     to define default values (or to override the defaults).  To avoid being
     prompted during the configuration process, you should (minimally) define
     the first two variables. (NET_SNMP_SYS_*)

     You may also define the following to avoid all interactive configuration:

	BATCH="yes"
>>> Cleaning up cache... done.
Success
]]>https://forum.netgate.com/post/642537https://forum.netgate.com/post/642537Sun, 07 Aug 2016 22:03:34 GMT<![CDATA[Reply to NUT package under pfSense 2.3.2: Status and configuration page not accessible on Wed, 27 Jul 2016 02:00:23 GMT]]>Yes, I am using the community edition and reinstallation of the package has even been my first thought. But when using the package management I would have expected a newer package version than 2.3.1 and therefore I did not go further in my first attempt.

Now I have reinstalled the package and everything works as expected.

Thank you.

]]>https://forum.netgate.com/post/640077https://forum.netgate.com/post/640077Wed, 27 Jul 2016 02:00:23 GMT<![CDATA[Reply to NUT package under pfSense 2.3.2: Status and configuration page not accessible on Wed, 27 Jul 2016 01:32:27 GMT]]>Community refers to the Community Edition of pfSense. If you are using the community edition, you should see version 2.7.4 as available. Re-install the NUT package and it should be correct.

]]>https://forum.netgate.com/post/640072https://forum.netgate.com/post/640072Wed, 27 Jul 2016 01:32:27 GMT<![CDATA[Reply to NUT package under pfSense 2.3.2: Status and configuration page not accessible on Wed, 27 Jul 2016 01:11:52 GMT]]>Thank your for the quick reply. It's good to know that the issue is fixed.

However, I am not sure about correct understanding of "fixed for community". Does it mean that it is just fixed in the github repository (https://github.com/pfsense/FreeBSD-ports/commits/devel/sysutils/pfSense-pkg-nut) but not yet repackaged for regular package update using the pfSense webGUI?

Is there a way to pull in your recent changes of the NUT package or do I have to wait for version 2.7.3?

]]>https://forum.netgate.com/post/640071https://forum.netgate.com/post/640071Wed, 27 Jul 2016 01:11:52 GMT<![CDATA[Reply to NUT package under pfSense 2.3.2: Status and configuration page not accessible on Tue, 26 Jul 2016 22:04:25 GMT]]>It's currently fixed for community, but not fixed yet for factory. The fixed version is 2.7.4.

]]>https://forum.netgate.com/post/640053https://forum.netgate.com/post/640053Tue, 26 Jul 2016 22:04:25 GMT<![CDATA[Reply to NUT package under pfSense 2.3.2: Status and configuration page not accessible on Tue, 26 Jul 2016 21:55:23 GMT]]>I believe this is my fault. I had some files missing from the commit for the new NUT package. I believe it's fixed now. Sorry for the problem.

]]>https://forum.netgate.com/post/640051https://forum.netgate.com/post/640051Tue, 26 Jul 2016 21:55:23 GMT