PFBlockerNG 2.1.1_2 Memory Errors
-
The problem seems to be related to i386 installation.
The fix is to edit /usr/local/pkg/pfblockerng/pfblockerng.inc (Diagnostics/Edit File)
go to line 236change```
pfb_global();// DNSBL Lighttpd HTTPS Daemon (Scans Lighttpd dnsbl_error.log for requested https domain names)
if (isset($argv[1]) && $argv[1] == 'dnsbl') {to``` pfb_global(); ini_set('memory_limit', '300M'); // DNSBL Lighttpd HTTPS Daemon (Scans Lighttpd dnsbl_error.log for requested https domain names) if (isset($argv[1]) && $argv[1] == 'dnsbl') {
I tested with 128M, 200M and it fails
256M succeeds, but BBcan177 recommends using 300M. You might need more depending on your system.So for i386, the default is 128M so very low, it should be 256M or more depending on you setup.
For amd64 system, the default is 512M, so you might need to bump it to 640M or 768M.after the modifying the file, go to shell and run
php /usr/local/www/pfblockerng/pfblockerng.php dc
Once this succeed, you do not need to re-run the dc command. The GeoIP db will change next month.
-
Thanks for the tip and help!
I changed the file like you wrote and i run the command in a putty terminal on the router now it hangs like 5 minutes on:[2.3.2-RELEASE][root@router.xxxxx.xxx]/root: php /usr/local/www/pfblockerng/pfblockerng.php dc
Country code update Start [ 08/03/16 22:51:59 ]
Converting MaxMind Country databases for pfBlockerNG.
Processing ISO IPv4 Continent/Country Data
Processing ISO IPv6 Continent/Country DataThe prompt is gone it seems its waiting for something.
-
After a long wait it outputs:
[2.3.2-RELEASE][root@router.xxxxx.xxx]/root: php /usr/local/www/pfblockerng/pfblockerng.php dc
Country code update Start [ 08/03/16 22:51:59 ]
Converting MaxMind Country databases for pfBlockerNG.
Processing ISO IPv4 Continent/Country Data
Processing ISO IPv6 Continent/Country Data
Creating pfBlockerNG Continent XML files
IPv4 Africa
IPv6 Africa
IPv4 Antarctica
IPv6 Antarctica
IPv4 Asia
IPv6 Asia
IPv4 Europe
IPv6 EuropeFatal error: Allowed memory size of 314572800 bytes exhausted (tried to allocate 72 bytes) in /usr/local/www/pfblockerng/pfblockerng.php on line 728
Call Stack:
0.0075 422488 1. {main}() /usr/local/www/pfblockerng/pfblockerng.php:0
603.9766 12588288 2. pfblockerng_get_countries() /usr/local/www/pfblockerng/pfblockerng.php:105
612.1411 44556872 3. explode() /usr/local/www/pfblockerng/pfblockerng.php:728PHP ERROR: Type: 1, File: /usr/local/www/pfblockerng/pfblockerng.php, Line: 728, Message: Allowed memory size of 314572800 bytes exhausted (tried to allocate 72 bytes)[2.3.2-RELEASE][root@router.xxxxxxx.xxx]/root:
-
Yes it takes 5+minutes to complete
Try increasing to 400M, 500M up to 750M
-
Thanks RonpfS ..!
After I set it to 500M it worked. -
@Gé:
Thanks RonpfS ..!
After I set it to 500M it worked.Thanks @RonpfS setting the memory_limit on line 236 to 300M fixed it, strange that @Gé needed 500M?
-
For me i needed even 500M didn't work :/ 640M worked for me.
-
For me i needed even more as 500M didn't work :/ 768M worked for me.
Which version of pfsense?
x386 or amd64 ?
how much ram ? -
CPU: Intel(R) Atom(TM) CPU C2558 @ 2.40GHz (2400.06-MHz K8-class CPU)
RAM: 8192MBpfSense 2.3.3.a.20160803.1621
pfBlockerNG 2.1.1_2 -
Well on amd64 the default is 512MB.
/var in Ramdisk ? getting full ?
-
@oswoldy:
Ok, while the php /usr/local/www/pfblockerng/pfblockerng.php dc command works, the cron jobs are still crashing and giving errors, I am currently at 2GB limit and climbing.
If you run the dc command, it changes the GeoIP database, you have to run a force reload after the dc complete.
Also check diagnostic system activity to see if there isn't something unusual.
Look at the System log for hints on the failure mode.
An can you post the portion of the pfblockerng.log file where you have failure. -
@oswoldy:
@oswoldy:
Ok, while the php /usr/local/www/pfblockerng/pfblockerng.php dc command works, the cron jobs are still crashing and giving errors, I am currently at 2GB limit and climbing.
If you run the dc command, it changes the GeoIP database, you have to run a force reload after the dc complete.
Also check diagnostic system activity to see if there isn't something unusual.
Look at the System log for hints on the failure mode.
An can you post the portion of the pfblockerng.log file where you have failure.Ok, I ran the dc command, followed by a force reload, no different. If I remove pfB_NAmerica_v4 then it works fine, crash report is:
Crash report begins. Anonymous machine information:
amd64
10.3-RELEASE-p5
FreeBSD 10.3-RELEASE-p5 #0 7307492(RELENG_2_3_2): Tue Jul 19 13:29:35 CDT 2016 root@ce23-amd64-builder:/builder/pfsense-232/tmp/obj/builder/pfsense-232/tmp/FreeBSD-src/sys/pfSenseCrash report details:
PHP Errors:
[04-Aug-2016 10:29:24 Europe/London] PHP Fatal error: Allowed memory size of 524288000 bytes exhausted (tried to allocate 20 bytes) in /usr/local/pkg/pfblockerng/pfblockerng.inc on line 3875
[04-Aug-2016 10:29:24 Europe/London] PHP Stack trace:
[04-Aug-2016 10:29:24 Europe/London] PHP 1. {main}() /usr/local/www/pfblockerng/pfblockerng.php:0
[04-Aug-2016 10:29:24 Europe/London] PHP 2. sync_package_pfblockerng() /usr/local/www/pfblockerng/pfblockerng.php:87
[04-Aug-2016 10:29:24 Europe/London] PHP 3. file() /usr/local/pkg/pfblockerng/pfblockerng.inc:3875I have reduced the limit back to 500MB as increasing it wasnt making a difference, the dc command still completes but not a force reload or CRON.
Once the dc command complete, the MaxMind database is created, so you do not need to re run it.
What about the pfblockerng.log ? What are the symptoms ?
Maybe raise it to 640M or 768M? -
I started a thread up over in the pfblocker posting and just letting everybody know that I'm also experiencing very similar memory issues.
Thismorning when I logged in, I also had a pfsense crash report with the following:
Crash report begins. Anonymous machine information: amd64 10.3-RELEASE-p5 FreeBSD 10.3-RELEASE-p5 #0 7307492(RELENG_2_3_2): Tue Jul 19 13:29:35 CDT 2016 root@ce23-amd64-builder:/builder/pfsense-232/tmp/obj/builder/pfsense-232/tmp/FreeBSD-src/sys/pfSense Crash report details: PHP Errors: [04-Aug-2016 00:18:40 America/Chicago] PHP Fatal error: Allowed memory size of 402653184 bytes exhausted (tried to allocate 72 bytes) in /usr/local/pkg/pfblockerng/pfblockerng.inc on line 3868 [04-Aug-2016 00:18:40 America/Chicago] PHP Stack trace: [04-Aug-2016 00:18:40 America/Chicago] PHP 1\. {main}() /etc/rc.start_packages:0 [04-Aug-2016 00:18:40 America/Chicago] PHP 2\. sync_package() /etc/rc.start_packages:90 [04-Aug-2016 00:18:40 America/Chicago] PHP 3\. eval() /etc/inc/pkg-utils.inc:631 [04-Aug-2016 00:18:40 America/Chicago] PHP 4\. sync_package_pfblockerng() /etc/inc/pkg-utils.inc(631) : eval()'d code:3 [04-Aug-2016 00:18:40 America/Chicago] PHP 5\. array_merge() /usr/local/pkg/pfblockerng/pfblockerng.inc:3868 Filename: /var/crash/minfree 2048
-
How I solved my problem:
My pfSense config:
- Version: 2.3.2 (amd64), running on VMWare 6
– Snort
-- pfBlockerNG
-- OpenVPN
-- Open-vm-tools
-- DHCP Relay
-- Quagga OSPFd with another 2 pfSense. - ~3000 users simultaneously
- 2 x 100 Mbit uplinks
- 16 GB RAM
- 80 GB SAS
- CPU Type: Intel(R) Xeon(R) CPU E5-4620 v2 @ 2.60GHz
- 16 CPUs: 8 package(s) x 2 core(s)
- 8 Interfaces, including WAN
- routing, filtering and relaying dhcp to 16 branches over MPLS, WiMax and fiber
- Load balance and failover
- QoS with Traffic shaper
- Updated Firewall Maximum Table Entries: 4000000 -> 8000000
1.1) Reboot - Edited /usr/local/pkg/pfblockerng/pfblockerng.inc and set memory limit to 500M
- Executed php /usr/local/www/pfblockerng/pfblockerng.php dc
- It's alive.
Thanks to all involved.
- Version: 2.3.2 (amd64), running on VMWare 6
-
-
I started a thread up over in the pfblocker posting and just letting everybody know that I'm also experiencing very similar memory issues.
Thismorning when I logged in, I also had a pfsense crash report with the following:
Crash report begins. Anonymous machine information: amd64 10.3-RELEASE-p5 FreeBSD 10.3-RELEASE-p5 #0 7307492(RELENG_2_3_2): Tue Jul 19 13:29:35 CDT 2016 root@ce23-amd64-builder:/builder/pfsense-232/tmp/obj/builder/pfsense-232/tmp/FreeBSD-src/sys/pfSense Crash report details: PHP Errors: [04-Aug-2016 00:18:40 America/Chicago] PHP Fatal error: Allowed memory size of 402653184 bytes exhausted (tried to allocate 72 bytes) in /usr/local/pkg/pfblockerng/pfblockerng.inc on line 3868 [04-Aug-2016 00:18:40 America/Chicago] PHP Stack trace: [04-Aug-2016 00:18:40 America/Chicago] PHP 1\. {main}() /etc/rc.start_packages:0 [04-Aug-2016 00:18:40 America/Chicago] PHP 2\. sync_package() /etc/rc.start_packages:90 [04-Aug-2016 00:18:40 America/Chicago] PHP 3\. eval() /etc/inc/pkg-utils.inc:631 [04-Aug-2016 00:18:40 America/Chicago] PHP 4\. sync_package_pfblockerng() /etc/inc/pkg-utils.inc(631) : eval()'d code:3 [04-Aug-2016 00:18:40 America/Chicago] PHP 5\. array_merge() /usr/local/pkg/pfblockerng/pfblockerng.inc:3868 Filename: /var/crash/minfree 2048
The php memory should be 512M by default, so setting it in the inc file to 400M might not help.
Did it fail without any fix to the inc file? Can you try setting the limit to 640M or 768M?
What do you have for Firewall Maximum Table Entries? -
POST-INSTALL script failed
Message from GeoIP-1.6.9:
GeoIP does not ship with the actual data files. You must download
them yourself! Please run:/usr/local/bin/geoipupdate.sh
You will need to run php /usr/local/www/pfblockerng/pfblockerng.php dc from the shell.
Once it succeeds, you should be able to install, it may need a reboot. -
For those with failed installation. Verify that /var isn't full. The MaxMind database is huge so if you are using a RAM Disk, it might eat up memory that is needed for the pfblockerng.php.
If disk space is running low, BBcan177 suggest to delete the /var/db/pfblockerng/deny and /var/db/pfblockerng/original folders before installation to free some disk space. This means it will need to redownload all IP feeds after installation.
Check pfblockerng.log, the system log, Dashboard for crash report, Status Monitoring System Memory.
Post relevant debug info here.
-
I started a thread up over in the pfblocker posting and just letting everybody know that I'm also experiencing very similar memory issues.
Thismorning when I logged in, I also had a pfsense crash report with the following:
Crash report begins. Anonymous machine information: amd64 10.3-RELEASE-p5 FreeBSD 10.3-RELEASE-p5 #0 7307492(RELENG_2_3_2): Tue Jul 19 13:29:35 CDT 2016 root@ce23-amd64-builder:/builder/pfsense-232/tmp/obj/builder/pfsense-232/tmp/FreeBSD-src/sys/pfSense Crash report details: PHP Errors: [04-Aug-2016 00:18:40 America/Chicago] PHP Fatal error: Allowed memory size of 402653184 bytes exhausted (tried to allocate 72 bytes) in /usr/local/pkg/pfblockerng/pfblockerng.inc on line 3868 [04-Aug-2016 00:18:40 America/Chicago] PHP Stack trace: [04-Aug-2016 00:18:40 America/Chicago] PHP 1\. {main}() /etc/rc.start_packages:0 [04-Aug-2016 00:18:40 America/Chicago] PHP 2\. sync_package() /etc/rc.start_packages:90 [04-Aug-2016 00:18:40 America/Chicago] PHP 3\. eval() /etc/inc/pkg-utils.inc:631 [04-Aug-2016 00:18:40 America/Chicago] PHP 4\. sync_package_pfblockerng() /etc/inc/pkg-utils.inc(631) : eval()'d code:3 [04-Aug-2016 00:18:40 America/Chicago] PHP 5\. array_merge() /usr/local/pkg/pfblockerng/pfblockerng.inc:3868 Filename: /var/crash/minfree 2048
The php memory should be 512M by default, so setting it in the inc file to 400M might not help.
Did it fail without any fix to the inc file? Can you try setting the limit to 640M or 768M?
What do you have for Firewall Maximum Table Entries?I'm going to have to do a bit of work this weekend on this and see more. I can try it and see what happens, but I'm getting concerned about reaching my 2gb memory limit. I can add more memory, but that requires me to go to the store and I'm kinda lazy…..and cheap. :)
Interesting that I too have a similar setup to the one user above. I'm running it on vmware esxi with Snort (disabled) and OpenVPN. Granted, I don't have nearly the hardware or setup, but it's interesting that we're both running vmware.
-
OK… Now maybe I'll try what others suggested... :)
I wiped and reinstalled pfsense tonight and pfblockng is still coming back with that crash and memory errors. I know others said to adjust the memory but I thought I would give this a try. Unfortunately, it failed.
I also had issues with php-fpm having high utilization....so I'm hoping that the wipe/reinstall fixed the issue with that. Time will tell.
-
What about posting pfblockerNG, system log, crash report, screen shot of system activity, etc, so we can see what is happening on your setup?
The crash report you posted earlier tells me you have under 400MB defined.
PHP Fatal error: Allowed memory size of 402653184 bytes exhausted
Did you raise the Firewall Maximum Table Entries ?
-
Temporary Fix for
php /usr/local/www/pfblockerng/pfblockerng.php update
Failing with memory exhaustion:
edit /usr/local/pkg/pfblockerng/pfblockerng.inc as discussed above:
…
pfb_global();
ini_set('memory_limit', '640M');
...cp /etc/rc.php_ini_setup /etc/rc.php_ini_setup.BACKUP
cp /usr/local/etc/php.ini /usr/local/etc/php.ini.BACKUP
perl -pi -e 's/536870912/671088640/g' /etc/rc.php_ini_setup /usr/local/etc/php.ini512 * 1024 * 1024 -> 536870912
640 * 1024 * 1024 -> 671088640 works for me. maybe your setup needs more :) -
Temporary Fix for
php /usr/local/www/pfblockerng/pfblockerng.php update
Failing with memory exhaustion:
cp /etc/rc.php_ini_setup /etc/rc.php_ini_setup.BACKUP
cp /usr/local/etc/php.ini /usr/local/etc/php.ini.BACKUP
perl -pi -e 's/536870912/671088640/g' /etc/rc.php_ini_setup /usr/local/etc/php.ini512 * 1024 * 1024 -> 536870912
640 * 1024 * 1024 -> 671088640 works for me. maybe your setup needs more :)There is probably a setting (memory_limit?) we can configure in the System/Advanced/System Tunables that will do that for you. But it may require a reboot.
The fix for the inc file is specific to pfblocker and shouldn't be needed once BBcan177 change the code.
-
/var/db/aliastables:
-rw-r–r-- 1 root wheel 351450 Aug 5 10:56 pfB_Top_v4.txt
-rw-r--r-- 1 root wheel 30690970 Aug 5 11:00 pfB_Top_v6.txtcat pfB_Top_v6.txt | wc -l
14213511.4mio entries? That can't be right?
cat pfB_Top_v4.txt | wc -l
22410Could this be the the root cause of all this?
-
/var/db/aliastables:
-rw-r–r-- 1 root wheel 351450 Aug 5 10:56 pfB_Top_v4.txt
-rw-r--r-- 1 root wheel 30690970 Aug 5 11:00 pfB_Top_v6.txtcat pfB_Top_v6.txt | wc -l
14213511.4mio entries? That can't be right?
cat pfB_Top_v4.txt | wc -l
22410Could this be the the root cause of all this?
What was the size of pfB_Top_v6.txt before the MaxMind db change ? I do not use these table, so I can't compare.
On option BBcan177 mentioned was that he might need to aggregate the table to shrink them.
-
pfB_Top_v6 was about 13000-ish before as far as i recall.
-
What about posting pfblockerNG, system log, crash report, screen shot of system activity, etc, so we can see what is happening on your setup?
The crash report you posted earlier tells me you have under 400MB defined.
PHP Fatal error: Allowed memory size of 402653184 bytes exhausted
Did you raise the Firewall Maximum Table Entries ?
I've been busy the past couple of days and blowing it away and restoring the config was pretty simple. I'm going to try to work on this a bit more this week and take the suggestions of what others have posted to see if it fixes it. I am going to guess that changing the memory settings around will help, but I also need to buy more memory for my system.
-
Hi,
I've been reading this forum and trying to figure out if there is a fix for this or not. I really didn't see anyone say "This is the fix" with instructions.
Can someone point me in the right direction?
Has anyone contacted the package creator?
Why hasn't anyone pulled this package from being install if there is issues with it?They should pull this package if its not working. It pretty much killed my pfsense box and I had to remove it.
Sorry for being so direct. But I just had to shut down my firewall ports to my websites and I'm trying to get this fixed as soon as possible so I can bring them back online.
Thanks,
Rick -
Me Too…..
(NOTE - malloc failure still shows 512mb of ram. My mem limit seems to be ignored)I'm using
pfb_global();
ini_set('memory_limit', '4096M');Still fails when updating with....
amd64
10.3-RELEASE-p5
FreeBSD 10.3-RELEASE-p5 #0 7307492(RELENG_2_3_2): Tue Jul 19 13:29:35 CDT 2016 root@ce23-amd64-builder:/builder/pfsense-232/tmp/obj/builder/pfsense-232/tmp/FreeBSD-src/sys/pfSenseCrash report details:
PHP Errors:
[08-Aug-2016 07:47:51 America/Chicago] PHP Fatal error: Allowed memory size of 536870912 bytes exhausted (tried to allocate 72 bytes) in /usr/local/pkg/pfblockerng/pfblockerng.inc on line 3876
[08-Aug-2016 07:47:51 America/Chicago] PHP Stack trace:
[08-Aug-2016 07:47:51 America/Chicago] PHP 1. {main}() /usr/local/www/pfblockerng/pfblockerng.php:0
[08-Aug-2016 07:47:51 America/Chicago] PHP 2. sync_package_pfblockerng() /usr/local/www/pfblockerng/pfblockerng.php:87
[08-Aug-2016 07:47:51 America/Chicago] PHP 3. file() /usr/local/pkg/pfblockerng/pfblockerng.inc:3876 -
All the php-scripts spawned by the gui are constrained by the memory-limit set by suhosin. Which is 512MB.
That's what my perl-one-liner was for. I even increased the limit to 4GB for testing today …
-
How I solved my problem:…
- Updated Firewall Maximum Table Entries: 4000000 -> 8000000
This ended up being the missing link for me. My default was 2M. When Perforado mentioned the count in /var/db/aliastables/ I checked mine: 4.4M in those lists alone. I bumped my max table entries in System / Advanced / Firewall & NAT from 2M to 10M and pfblockerng started working again.
-
All the php-scripts spawned by the gui are constrained by the memory-limit set by suhosin. Which is 512MB.
That's what my perl-one-liner was for. I even increased the limit to 4GB for testing today …
For those wandering about suhosin, it is defined in /usr/local/etc/php.ini
; File generated from /etc/rc.php_ini_setup output_buffering = "0" expose_php = Off implicit_flush = true magic_quotes_gpc = Off max_execution_time = 900 request_terminate_timeout = 900 max_input_time = 1800 max_input_vars = 5000 register_argc_argv = On register_long_arrays = Off variables_order = "GPCS" file_uploads = On upload_tmp_dir = /tmp upload_max_filesize = 200M post_max_size = 200M html_errors = Off zlib.output_compression = Off zlib.output_compression_level = 1 include_path = ".:/etc/inc:/usr/local/www:/usr/local/captiveportal:/usr/local/pkg:/usr/local/www/classes:/usr/local/www/classes/Form" display_startup_errors=on display_errors=on log_errors=on error_log=/tmp/PHP_errors.log extension_dir=/usr/local/lib/php/20131226/ date.timezone="America/New_York" session.hash_bits_per_character = 5 session.hash_function = 1 ; Extensions ; opcache Settings opcache.enabled="1" opcache.enable_cli="0" opcache.memory_consumption="50" [suhosin] suhosin.get.max_array_index_length = 256 suhosin.get.max_vars = 5000 suhosin.get.max_value_length = 500000 suhosin.post.max_array_index_length = 256 suhosin.post.max_vars = 5000 suhosin.post.max_value_length = 500000 suhosin.request.max_array_index_length = 256 suhosin.request.max_vars = 5000 suhosin.request.max_value_length = 500000 suhosin.memory_limit = 536870912
Setting 'memory_limit' in the inc file is maxed by the suhosin.memory_limit.
The memory_limit is defined in /etc/inc/config.inc
// Set memory limit to 512M on amd64. if ($ARCH == "amd64") { ini_set("memory_limit", "512M"); } else { ini_set("memory_limit", "128M"); }
So for those using many IPV6 GeoIP table on amd64, they probably have to change /usr/local/etc/php.ini, /etc/rc.php_ini_setup, pfblockerng.inc as well as the Firewall Maximum Table Entries
The php memory issues are not specific to pfBlockerNG, backup crashes when backup size is too big, the Diagnostics/Tables will crash when viewing huge table, etc.
-
I am having similar issues + NAT / routing was not working at all.
error:
Crash report begins. Anonymous machine information: amd64 10.3-RELEASE-p5 FreeBSD 10.3-RELEASE-p5 #0 7307492(RELENG_2_3_2): Tue Jul 19 13:29:35 CDT 2016 root@ce23-amd64-builder:/builder/pfsense-232/tmp/obj/builder/pfsense-232/tmp/FreeBSD-src/sys/pfSense Crash report details: PHP Errors: [09-Aug-2016 11:27:29 America/New_York] PHP Fatal error: Allowed memory size of 536870912 bytes exhausted (tried to allocate 72 bytes) in /usr/local/pkg/pfblockerng/pfblockerng.inc on line 3875 [09-Aug-2016 11:27:29 America/New_York] PHP Stack trace: [09-Aug-2016 11:27:29 America/New_York] PHP 1\. {main}() /etc/rc.start_packages:0 [09-Aug-2016 11:27:29 America/New_York] PHP 2\. sync_package() /etc/rc.start_packages:90 [09-Aug-2016 11:27:29 America/New_York] PHP 3\. eval() /etc/inc/pkg-utils.inc:631 [09-Aug-2016 11:27:29 America/New_York] PHP 4\. sync_package_pfblockerng() /etc/inc/pkg-utils.inc(631) : eval()'d code:3 [09-Aug-2016 11:27:29 America/New_York] PHP 5\. file() /usr/local/pkg/pfblockerng/pfblockerng.inc:3875
I changed the fire wall rule # to 8000000 and added ini_set("memory_limit", "768M");
I still see the error above. But I at lest have routing back. -
@richcj10@gmail.com:
I am having similar issues + NAT / routing was not working at all.
error:
Crash report begins. Anonymous machine information: amd64 10.3-RELEASE-p5 FreeBSD 10.3-RELEASE-p5 #0 7307492(RELENG_2_3_2): Tue Jul 19 13:29:35 CDT 2016 root@ce23-amd64-builder:/builder/pfsense-232/tmp/obj/builder/pfsense-232/tmp/FreeBSD-src/sys/pfSense Crash report details: PHP Errors: [09-Aug-2016 11:27:29 America/New_York] PHP Fatal error: Allowed memory size of 536870912 bytes exhausted (tried to allocate 72 bytes) in /usr/local/pkg/pfblockerng/pfblockerng.inc on line 3875 [09-Aug-2016 11:27:29 America/New_York] PHP Stack trace: [09-Aug-2016 11:27:29 America/New_York] PHP 1\. {main}() /etc/rc.start_packages:0 [09-Aug-2016 11:27:29 America/New_York] PHP 2\. sync_package() /etc/rc.start_packages:90 [09-Aug-2016 11:27:29 America/New_York] PHP 3\. eval() /etc/inc/pkg-utils.inc:631 [09-Aug-2016 11:27:29 America/New_York] PHP 4\. sync_package_pfblockerng() /etc/inc/pkg-utils.inc(631) : eval()'d code:3 [09-Aug-2016 11:27:29 America/New_York] PHP 5\. file() /usr/local/pkg/pfblockerng/pfblockerng.inc:3875
I changed the fire wall rule # to 8000000 and added ini_set("memory_limit", "768M");
I still see the error above. But I at lest have routing back.Did you fix /usr/local/etc/php.ini, /etc/rc.php_ini_setup ?
-
same problem:
Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 8388608 bytes) in /usr/local/pkg/pfblockerng/pfblockerng.inc on line 3867 Call Stack: 0.0001 245984 1\. {main}() /usr/local/www/pkg_edit.php:0 0.4857 2721392 2\. eval('global $pfb; $pfb['save'] = TRUE; sync_package_pfblockerng();') /usr/local/www/pkg_edit.php:253 0.4857 2722328 3\. sync_package_pfblockerng() /usr/local/www/pkg_edit.php(253) : eval()'d code:3 3.9159 5449944 4\. file() /usr/local/pkg/pfblockerng/pfblockerng.inc:3867 PHP ERROR: Type: 1, File: /usr/local/pkg/pfblockerng/pfblockerng.inc, Line: 3867, Message: Allowed memory size of 134217728 bytes exhausted (tried to allocate 8388608 bytes)
Crash report begins. Anonymous machine information:
amd64
10.3-RELEASE-p5
FreeBSD 10.3-RELEASE-p5 #0 7307492(RELENG_2_3_2): Tue Jul 19 13:29:35 CDT 2016 root@ce23-amd64-builder:/builder/pfsense-232/tmp/obj/builder/pfsense-232/tmp/FreeBSD-src/sys/pfSenseCrash report details:
PHP Errors:
[10-Aug-2016 12:50:00 Europe/Bratislava] PHP Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 8388608 bytes) in /usr/local/pkg/pfblockerng/pfblockerng.inc on line 3867
[10-Aug-2016 12:50:00 Europe/Bratislava] PHP Stack trace:
[10-Aug-2016 12:50:00 Europe/Bratislava] PHP 1. {main}() /usr/local/www/pkg_edit.php:0
[10-Aug-2016 12:50:00 Europe/Bratislava] PHP 2. eval() /usr/local/www/pkg_edit.php:253
[10-Aug-2016 12:50:00 Europe/Bratislava] PHP 3. sync_package_pfblockerng() /usr/local/www/pkg_edit.php(253) : eval()'d code:3
[10-Aug-2016 12:50:00 Europe/Bratislava] PHP 4. file() /usr/local/pkg/pfblockerng/pfblockerng.inc:3867
[10-Aug-2016 12:54:33 Europe/Bratislava] PHP Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 8388608 bytes) in /usr/local/pkg/pfblockerng/pfblockerng.inc on line 3867
[10-Aug-2016 12:54:33 Europe/Bratislava] PHP Stack trace:
[10-Aug-2016 12:54:33 Europe/Bratislava] PHP 1. {main}() /usr/local/www/pkg_edit.php:0
[10-Aug-2016 12:54:33 Europe/Bratislava] PHP 2. eval() /usr/local/www/pkg_edit.php:253
[10-Aug-2016 12:54:33 Europe/Bratislava] PHP 3. sync_package_pfblockerng() /usr/local/www/pkg_edit.php(253) : eval()'d code:3
[10-Aug-2016 12:54:33 Europe/Bratislava] PHP 4. file() /usr/local/pkg/pfblockerng/pfblockerng.inc:3867 -
@richcj10@gmail.com:
I am having similar issues + NAT / routing was not working at all.
error:
Crash report begins. Anonymous machine information: amd64 10.3-RELEASE-p5 FreeBSD 10.3-RELEASE-p5 #0 7307492(RELENG_2_3_2): Tue Jul 19 13:29:35 CDT 2016 root@ce23-amd64-builder:/builder/pfsense-232/tmp/obj/builder/pfsense-232/tmp/FreeBSD-src/sys/pfSense Crash report details: PHP Errors: [09-Aug-2016 11:27:29 America/New_York] PHP Fatal error: Allowed memory size of 536870912 bytes exhausted (tried to allocate 72 bytes) in /usr/local/pkg/pfblockerng/pfblockerng.inc on line 3875 [09-Aug-2016 11:27:29 America/New_York] PHP Stack trace: [09-Aug-2016 11:27:29 America/New_York] PHP 1\. {main}() /etc/rc.start_packages:0 [09-Aug-2016 11:27:29 America/New_York] PHP 2\. sync_package() /etc/rc.start_packages:90 [09-Aug-2016 11:27:29 America/New_York] PHP 3\. eval() /etc/inc/pkg-utils.inc:631 [09-Aug-2016 11:27:29 America/New_York] PHP 4\. sync_package_pfblockerng() /etc/inc/pkg-utils.inc(631) : eval()'d code:3 [09-Aug-2016 11:27:29 America/New_York] PHP 5\. file() /usr/local/pkg/pfblockerng/pfblockerng.inc:3875
I changed the fire wall rule # to 8000000 and added ini_set("memory_limit", "768M");
I still see the error above. But I at lest have routing back.Did you fix /usr/local/etc/php.ini, /etc/rc.php_ini_setup ?
What fix?
-
@richcj10@gmail.com:
@richcj10@gmail.com:
I am having similar issues + NAT / routing was not working at all.
error:
Crash report begins. Anonymous machine information: amd64 10.3-RELEASE-p5 FreeBSD 10.3-RELEASE-p5 #0 7307492(RELENG_2_3_2): Tue Jul 19 13:29:35 CDT 2016 root@ce23-amd64-builder:/builder/pfsense-232/tmp/obj/builder/pfsense-232/tmp/FreeBSD-src/sys/pfSense Crash report details: PHP Errors: [09-Aug-2016 11:27:29 America/New_York] PHP Fatal error: Allowed memory size of 536870912 bytes exhausted (tried to allocate 72 bytes) in /usr/local/pkg/pfblockerng/pfblockerng.inc on line 3875 [09-Aug-2016 11:27:29 America/New_York] PHP Stack trace: [09-Aug-2016 11:27:29 America/New_York] PHP 1\. {main}() /etc/rc.start_packages:0 [09-Aug-2016 11:27:29 America/New_York] PHP 2\. sync_package() /etc/rc.start_packages:90 [09-Aug-2016 11:27:29 America/New_York] PHP 3\. eval() /etc/inc/pkg-utils.inc:631 [09-Aug-2016 11:27:29 America/New_York] PHP 4\. sync_package_pfblockerng() /etc/inc/pkg-utils.inc(631) : eval()'d code:3 [09-Aug-2016 11:27:29 America/New_York] PHP 5\. file() /usr/local/pkg/pfblockerng/pfblockerng.inc:3875
I changed the fire wall rule # to 8000000 and added ini_set("memory_limit", "768M");
I still see the error above. But I at lest have routing back.Did you fix /usr/local/etc/php.ini, /etc/rc.php_ini_setup ?
What fix?
Temporary Fix for
php /usr/local/www/pfblockerng/pfblockerng.php update
Failing with memory exhaustion:
edit /usr/local/pkg/pfblockerng/pfblockerng.inc as discussed above:
…
pfb_global();
ini_set('memory_limit', '640M');
...cp /etc/rc.php_ini_setup /etc/rc.php_ini_setup.BACKUP
cp /usr/local/etc/php.ini /usr/local/etc/php.ini.BACKUP
perl -pi -e 's/536870912/671088640/g' /etc/rc.php_ini_setup /usr/local/etc/php.ini512 * 1024 * 1024 -> 536870912
640 * 1024 * 1024 -> 671088640 works for me. maybe your setup needs more :)You can edit the files or do the perl command
-
Hello!
I also had this problem. Editing the files as described earlier (including The memory_limit defined in /etc/inc/config.inc where I increased the amd64 limit to 640M) was part of the solution for me.
The last thing for me was to increase the Firewall Maximum Table Entries: 2000000 -> 10000000. When using pfBlockerNG the total of firewall rules are about 4500000 rows now. Reloading those rules requires about 9000000 table entries since that the new rules are loaded before the old ones are deleted ending up with temporary 9000000 million rows in the table.
If you have lesser than 9000000 you will get an out-of-memory error message plus that some rules are not loaded correctly. -
https://forum.pfsense.org/index.php?topic=102470.msg645219#msg645219
-
I've submitted a PR to pfSense's GitHub repo:
https://github.com/pfsense/pfsense/pull/3101After that, the following changes suggested by @Perforado on the package could be implemented and should work.
@Perforado:Temporary Fix for
php /usr/local/www/pfblockerng/pfblockerng.php update
Failing with memory exhaustion:
edit /usr/local/pkg/pfblockerng/pfblockerng.inc as discussed above:
…
pfb_global();
ini_set('memory_limit', '640M');
...