SG-2440 - mSATA Secondary Drive
-
Hi all,
I've installed an msata drive for squid/suricata. The drive is recognized, but i'm getting the error (msg) below:
/media: fdisk ada0
******* Working on device /dev/ada0 *******
parameters extracted from in-core disklabel are:
cylinders=124053 heads=16 sectors/track=63 (1008 blks/cyl)Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=124053 heads=16 sectors/track=63 (1008 blks/cyl)Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
start 63, size 125045361 (61057 Meg), flag 80 (active)
beg: cyl 0/ head 1/ sector 1;
end: cyl 148/ head 15/ sector 63
The data for partition 2 is:
<unused>The data for partition 3 is:
<unused>The data for partition 4 is:
<unused>Do i need to wipe the partition and re-create? Any assistance would be appreciated.</unused></unused></unused> -
Anything you do to add the mSATA as a second drive will be outside what is designed to be done in the webGUI.
I would back up the config, reinstall to the mSATA, restore the config, and forget the on-board eMMC exists.
The factory installer should install to and boot from the mSATA automatically.
Then you will have a standard configuration and not a special case.
-
That makes the most sense so will give it a shot. Thanks!