<![CDATA[Page fault on Alix2c3]]>Just tried pfSense-20080825-1051.img on my test Alix. It's worked fine with older snapshots, but I haven't tried one lately due to wireless being broke. Used physdiskwrite to write the image to a 1GB CF card, card worked with the last version I tried a couple of weeks ago.
This one lets me assign interfaces, but bombs before finishing boot:
Setting up microcode and tx/rx offloading…done.
kernel trap 12 with interrupts disabled

Fatal trap 12: page fault while in kernel mode
fault virtual address   = 0x18
fault code              = supervisor read, page not present
instruction pointer     = 0x20:0xc076ec5b
stack pointer           = 0x28:0xcd045994
frame pointer           = 0x28:0xcd0459a0
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, def32 1, gran 1
processor eflags        = resume, IOPL = 0
current process         = 71021 (setkey)
trap number             = 12
panic: page fault
Uptime: 2m25s
Cannot dump. No dump device defined.

EDIT: I was thinking this was something with the Alix hardware, but I see it was running setkey, so maybe this is related to IPSec changes.

EDIT: Yeah, renaming setkey and rebooting gets the system running after it checks the disks.

EDIT: Looking at CVS suggests this is a known issue and it is being worked on. So, like never mind.

]]>https://forum.netgate.com/topic/10544/page-fault-on-alix2c3RSS for NodeFri, 12 Jun 2026 01:27:05 GMTMon, 25 Aug 2008 16:36:37 GMT60