Web Config Hangs
-
Hello all, recently after the installation of a new NIC and assigning interfaces, the webconfig hangs over and over again. The only thing that did anything was restarting webconfig (11) and php-fpm (16) via console and only in that order. I can only provide basic information now as webconfig hangs shortly after doing that bodge. I'm also a bit of a rookie at pfsense so if yous need any information, please walk me through how to get at it. Cheers.
PfSense ver 2.3.2-release p1
Machine specs as follows:
CPUs 2x Intel Xeon X5540
RAM 10GB DDR3 ECC (2GB+8GB)
HDD RAID6 4x146GB SAS behind stock IBM raid
INT 2x Broadcom on motherboard interfaces (192.168.0.x, 192.168.1.x), 1x 4P hp branded, pretty sure its an EMC card with one port assigned (10.1.1.x)
Board IBM x3550 m2 boardAdditional notes that may be important:
The additional NIC is in PCIex16 slot 2
There is an unused SAS HBA in PCIeX8 slot 1 (has never interfered with operation)
When the web interface hangs and I hit refresh, I get a 504 gateway timeout error.Thanks in advance for the time.
-
Anything in /var/log/nginx-error.log?
-
@KOM:
Anything in /var/log/nginx-error.log?
tail /var/log/nginx-error.log produced this:
I noticed that I can still use the webconfig as long as I dont visit the dashboard. I think I broke the widgets haha
2016/10/29 05:24:14 [error] 59307#100175: *106 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 192.168.0.103, server: , request: "GET /getstats.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "192.168.0.1", referrer: "http://192.168.0.1/" 2016/10/29 12:31:23 [error] 59541#100285: *243 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 192.168.0.79, server: , request: "GET / HTTP/1.0", upstream: "fastcgi://unix:/var/run/php-fpm.socket" 2016/10/29 13:22:58 [error] 59541#100285: *245 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 192.168.0.103, server: , request: "GET /widgets/widgets/thermal_sensors.widget.php?getThermalSensorsData=11477707597287 HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "192.168.0.1", referrer: "http://192.168.0.1/" 2016/10/29 13:22:58 [error] 59541#100285: *247 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 192.168.0.103, server: , request: "GET /getstats.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "192.168.0.1", referrer: "http://192.168.0.1/" 2016/10/29 13:22:58 [error] 59541#100285: *249 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 192.168.0.103, server: , request: "GET /widgets/widgets/ntp_status.widget.php?updateme=yes HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "192.168.0.1", referrer: "http://192.168.0.1/" 2016/10/29 13:22:58 [error] 59541#100285: *251 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 192.168.0.103, server: , request: "GET /widgets/widgets/log.widget.php?lastsawtime=1477676679 HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "192.168.0.1", referrer: "http://192.168.0.1/" 2016/10/29 13:22:58 [error] 59541#100285: *253 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 192.168.0.103, server: , request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "192.168.0.1", referrer: "http://192.168.0.1/" 2016/10/29 13:22:58 [error] 59541#100285: *255 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 192.168.0.103, server: , request: "GET /ifstats.php?if=em0 HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "192.168.0.1", referrer: "http://192.168.0.1/graph.php?ifnum=opt1&ifname=AP&timeint=2&initdelay=6" 2016/10/29 13:39:39 [error] 59541#100285: *271 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 192.168.0.79, server: , request: "GET / HTTP/1.0", upstream: "fastcgi://unix:/var/run/php-fpm.socket" 2016/10/29 15:43:14 [crit] 46634#100346: *1 connect() to unix:/var/run/php-fpm.socket failed (2: No such file or directory) while connecting to upstream, client: 192.168.0.3, server: , request: "GET /system_advanced_admin.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket:", host: "192.168.0.1"
Cheers.