<![CDATA[Ikev2 windows 7 client problem]]>So I was finally able to configure the connection using EAP-RADIUS. It connects fine. But the connection does not route me into the network.
If I look at the "status" of the network, I get the IPv4 address which is correct, but then the subnet mask shows up as 255.255.255.255 with a blank default gateway.
Obviously I cannot connect to the LAN that is connected to the VPN server.

Any thoughts?

I'm assuming it's a routing problem, but I think figuring it out may be beyond my skills.

Would appreciate some input.

FYI:
Let's say my local IP is 10.1.1.111, the LAN subnet I'm trying to connect to is 192.168.21.0/24, the IP of the VPN server is 192.168.21.1 and the virtual IP I get from the VPN is 192.168.10.1

Thanks in advance.

]]>https://forum.netgate.com/topic/107672/ikev2-windows-7-client-problemRSS for NodeWed, 12 Aug 2026 20:13:16 GMTWed, 09 Nov 2016 02:10:44 GMT60