Static route from/to LAN to/from OpenVPN
-
Hello there.
I have pfsense with openvpn connection to remote VPN server. (pfsense is a client and receive static route from vpn server 192.168.2.0/23).
I have 1 LAN network (192.168.100.0/24).I have ping from pfsense to IPs over openvpn connection (for example 192.168.2.1, 192.168.2.88, 192.168.3.88 etc.)
I wanna LAN network of pfsense (192.168.100.0/24) to have access to networks over OpenVPN (192.168.2.0/23).This is pfsense route tables:
IPv4
Destination Gateway Flags Use Mtu Netif Expire
default MY_ISP_GW UGS 2950183 1500 bce1
xx.xx.xx.xx/29 link#6 U 47024 1500 bce1
xx.xx.xx.xx link#6 UHS 0 16384 lo0
127.0.0.1 link#9 UH 16 16384 lo0
192.168.2.0/23 192.168.3.5 UGS 55010 1500 ovpnc1
192.168.3.0/24 192.168.3.5 UGS 36 1500 ovpnc1
192.168.3.5 link#11 UH 0 1500 ovpnc1
192.168.3.6 link#11 UHS 0 16384 lo0
192.168.100.0/24 link#1 U 5379684 1500 bce0
192.168.100.1 link#1 UHS 0 16384 lo0(xx.xx.xx.xx is our public IP addresses)
Can you help me what static rules, or NAT settigs must be create to work connection from LAN network (192.168.100.0/24) to OpenVPN side (192.168.2.0/23)
Best wishes,
-
Does your remote side know it needs to go down the vpn connection to get to 192.168.100.. Sounds like you setup a roadwarrior connection. You more than likely want a site to site if your connecting to sites together.