Running 2 OpenVPN Client (each on a separate VLAN)
-
I am fairly new to pfsense (please go easy on me), I've looked at a number of post on here and have not come up with a solutions to my issue.
My Question is this: Is it possible to run 2 separate OpenVPN clients on one installation of pfSense? If so, how would I go about setting up?
I am looking to run 2 simultaneous OpenVPN clients (each running on their own VLAN):
1. Static IP address for streaming services
2. Normal shared IP for everything elseThe issue I'm running into is that I can only get one connection going but not the other. I've verified that my configs are correct for each client running by themselves, but once I add the second client it never connects. It doesn't matter what order I add them.
-
That should be possible though. However, you have to care, that each client connects through the WAN gateway.
So in the client settings of each check "Don't pull routes" to avoid that the server sets the default route. Now you have to control VPN traffic by firewall rules (policy routing) and each client should connect well.
-
That should be possible though. However, you have to care, that each client connects through the WAN gateway.
So in the client settings of each check "Don't pull routes" to avoid that the server sets the default route. Now you have to control VPN traffic by firewall rules (policy routing) and each client should connect well.
Thanks Viragomann!!!
That worked.