<![CDATA[Define listen address for webUI]]>I run a pfSense with HAproxy and a lot (tens) of virtual IPs and the firewall disabled. HAproxy listens on port 443 on almost all these virtual IPs, but some are empty for now. When I try to access port 443 on these "empty" IPs, I get the pfSense webConfigurator.

I would like to give pfSense a list of IPs the webConfigurator can listen on, aka decide which Listen directives are written in /var/etc/nginx-webConfigurator.conf.
There doesn't seem to be any way to do this in the UI as it is now, it seems to be hardcoded on : <port>and [::]: <port>Does anybody know a way to define the listen address?</port></port>

]]>https://forum.netgate.com/topic/110054/define-listen-address-for-webuiRSS for NodeWed, 14 Oct 2026 10:23:53 GMTTue, 10 Jan 2017 12:34:00 GMT60<![CDATA[Reply to Define listen address for webUI on Fri, 13 Jan 2017 15:37:31 GMT]]>There has been a feature request for so long that I don't expect it's going to happen, ever.

]]>https://forum.netgate.com/post/672458https://forum.netgate.com/post/672458Fri, 13 Jan 2017 15:37:31 GMT<![CDATA[Reply to Define listen address for webUI on Thu, 12 Jan 2017 09:45:30 GMT]]>Thank you for your solution!

I was considering using a different port for the webConfigurator, but I feel it makes my setup a bit convoluted. Is there a feature request to fix this, or should I make one?

]]>https://forum.netgate.com/post/672161https://forum.netgate.com/post/672161Thu, 12 Jan 2017 09:45:30 GMT<![CDATA[Reply to Define listen address for webUI on Tue, 10 Jan 2017 12:39:20 GMT]]>No way in the GUI. Move the WebGUI out of 443 and put it behind HAProxy as well.

]]>https://forum.netgate.com/post/671626https://forum.netgate.com/post/671626Tue, 10 Jan 2017 12:39:20 GMT