Traffic shaper config
-
Hi, this is probably extremely simply to setup but I seem to have found no information so far from Google.
Basically I have 1 WAN 1 LAN and 1 Wireless
LAN and Wireless are on separate subnets.
I want wireless to have limited bandwidth to prevent the traffic on it hogging stuff on LAN.
How do I set this up in the traffic shaper?
-
solved
-
Whatever you do, don't share your solution because that might help someone else, and we certainly don't want that here in the support forums…
-
@KOM:
Whatever you do, don't share your solution because that might help someone else, and we certainly don't want that here in the support forums…
LOL 8)
-
Using a quick & dirty limiter, if anyones interested :-
-
Create an upload & download limiter via Firewall -> Traffic Shaper ->Limiters
-
Create a firewall rule to pass traffic through the interface, Firewall -> Rules -> Interface
In my case I'm limiting the GUEST Lan to 2 Mbps and they can only access the Internet.
-
In the above rule that was created goto Advanced Options and add the 2 limiters to the IN / OUT pipe.
-
View the limiter info via Diagnostics -> Limiter Info and run a speed test
Log in to see the screenshots :)
![Limiter 1.jpg](/public/imported_attachments/1/Limiter 1.jpg)
![Limiter 1.jpg_thumb](/public/imported_attachments/1/Limiter 1.jpg_thumb)
![Limiter 2.jpg](/public/imported_attachments/1/Limiter 2.jpg)
![Limiter 2.jpg_thumb](/public/imported_attachments/1/Limiter 2.jpg_thumb)
![Limiter 3.jpg](/public/imported_attachments/1/Limiter 3.jpg)
![Limiter 3.jpg_thumb](/public/imported_attachments/1/Limiter 3.jpg_thumb)
![Limiter 4.jpg](/public/imported_attachments/1/Limiter 4.jpg)
![Limiter 4.jpg_thumb](/public/imported_attachments/1/Limiter 4.jpg_thumb)
![Limiter 5.jpg](/public/imported_attachments/1/Limiter 5.jpg)
![Limiter 5.jpg_thumb](/public/imported_attachments/1/Limiter 5.jpg_thumb) -