Issues With External VPN Connections – PF Sense Behind Cisco Router
-
Needing assistance trying to get remote connections to successfully connect. Currently have a Cisco Router with Gi 0/0/0 going out to the WAN link with our only public IP address. Default route sends all traffic out of this interface. I've looked at several PF Sense documents on setting up the VPN Server and believe that the PF Sense side is correct, but I don't see much documentation on how to do the static NAT translation on the router side. Wondering if the below statement looks correct (the last line). Any assistance would be greatly appreciated.
!
interface GigabitEthernet0/0/0
description WAN side
ip address x.x.x.170 255.255.255.248
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip verify unicast reverse-path
ip access-group 110 in
load-interval 30
negotiation auto
ip virtual-reassembly
!
!
interface GigabitEthernet0/0/2
description LAN Side
ip address 10.20.0.1 255.255.255.252
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
negotiation auto
ip virtual-reassembly
!
ip nat inside source list 1 interface GigabitEthernet0/0/0 overload
ip nat inside source static udp 10.20.0.2 1194 x.x.x.170 1194 extendable -
I have your scenario working reliably on a 867
Differences I can see from my config to yours
ip virtual-reassembly ip virtual-reassembly in
ip nat inside source static udp 10.20.0.2 1194 x.x.x.170 1194 extendable ip nat inside source static udp 10.20.0.2 1194 interface GigabitEthernet0/0/0 1194
(Assuming 10.20.0.2 is your pfSense box, which it could only be with 252 mask)
Plus you need the access-list or access-group permit udp 1194 stuff