Unable to access web interface.
-
Hi
pfSense 2.3.2-RELEASE-p1 (amd64)
There have been NO config changes made in the last 3-4 days.Not had any issues and was able to log into the Web Interface earlier today.
Just tried to log in and it times out trying to get to the Web Interface.
I've tried from different browsers with the same result.No issues getting online or accessing the box via SSH.
Any idea how I can get access again, ideally without having to fully restart ?
Thanks
-
Hi
It seemed to start working again, but has now do it again.
top shows the following and there is not a lot happening on the network at this time.
last pid: 61424; load averages: 0.91, 0.56, 0.38 up 53+15:36:15 13:26:30 50 processes: 2 running, 48 sleeping CPU: 19.3% user, 0.0% nice, 6.9% system, 0.2% interrupt, 73.6% idle Mem: 70M Active, 2419M Inact, 991M Wired, 144K Cache, 871M Buf, 4350M Free Swap: 16G Total, 16G Free PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND 14264 root 1 102 0 45180K 9404K CPU2 2 2:39 99.85% pkg 61563 root 17 20 0 1178M 1041M nanslp 3 20.6H 1.27% ntopng 61408 root 3 30 0 28124K 9168K uwait 2 92:49 0.00% redis-ser 84937 unbound 4 20 0 96744K 72120K kqread 0 40:40 0.00% unbound 16033 root 1 20 0 16676K 2312K bpf 3 15:23 0.00% filterlog 82251 root 1 52 20 17000K 2568K wait 0 8:13 0.00% sh 41035 root 1 20 0 14504K 2308K select 1 7:41 0.00% syslogd 71571 root 5 20 0 19108K 2376K accept 2 7:38 0.00% dpinger 23780 root 1 20 0 14408K 1952K select 3 4:51 0.00% powerd 40446 root 1 20 0 21036K 5200K select 3 3:39 0.00% miniupnpd 71407 root 1 20 0 30140K 17968K select 1 2:52 0.00% ntpd 25379 root 1 20 0 39136K 7360K kqread 2 2:51 0.00% nginx 25596 root 1 20 0 39136K 7524K kqread 3 1:53 0.00% nginx 269 root 1 20 0 262M 25140K kqread 1 1:51 0.00% php-fpm 90245 dhcpd 1 20 0 24812K 13748K select 2 1:33 0.00% dhcpd 5966 root 1 20 0 50312K 6924K select 0 1:09 0.00% mpd5 23820 root 1 52 0 287M 49128K piperd 1 0:23 0.00% php-fpm
And now it's just started working again.
top is currently showing:last pid: 98640; load averages: 0.84, 0.67, 0.44 up 53+15:38:08 13:28:23 48 processes: 1 running, 47 sleeping CPU: 1.6% user, 0.0% nice, 1.9% system, 0.2% interrupt, 96.3% idle Mem: 69M Active, 2417M Inact, 991M Wired, 144K Cache, 876M Buf, 4353M Free Swap: 16G Total, 16G Free PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND 23820 root 1 52 0 287M 49256K accept 1 0:23 3.86% php-fpm 61563 root 17 20 0 1178M 1041M nanslp 1 20.6H 1.27% ntopng 61408 root 3 30 0 28124K 9168K uwait 2 92:50 0.00% redis-ser 84937 unbound 4 20 0 96744K 72120K kqread 1 40:40 0.00% unbound 16033 root 1 20 0 16676K 2312K bpf 1 15:23 0.00% filterlog 82251 root 1 52 20 17000K 2568K wait 2 8:13 0.00% sh 41035 root 1 20 0 14504K 2308K select 1 7:41 0.00% syslogd 71571 root 5 20 0 19108K 2376K accept 2 7:38 0.00% dpinger 23780 root 1 20 0 14408K 1952K select 3 4:51 0.00% powerd 40446 root 1 20 0 21036K 5200K select 3 3:39 0.00% miniupnpd 71407 root 1 20 0 30140K 17968K select 3 2:52 0.00% ntpd 25379 root 1 20 0 39136K 7360K kqread 3 2:51 0.00% nginx 25596 root 1 20 0 39136K 7524K kqread 0 1:53 0.00% nginx 269 root 1 20 0 262M 25140K kqread 0 1:51 0.00% php-fpm 90245 dhcpd 1 20 0 24812K 13748K select 3 1:33 0.00% dhcpd 5966 root 1 20 0 50312K 6924K select 0 1:09 0.00% mpd5 93112 root 10 20 0 52660K 3584K uwait 1 0:16 0.00% filterdns
What is pkg and why does that seem to occasionally take CPU resources ?
Thanks -
Disable the upgrade checks on dashboard (and remove the packages widget if it's there).
-
Thanks I've disabled the update checks.
Only things left are System Information, Interfaces, Service Status, Interface Statistics and IPSec.I'll see how that goes.
Thanks