[SOLVED] 2 IPSec tunnels with same remote network
-
Hello ,
I have a pfsense box in network 10.100.100.0/24 . I also have an ipsec tunnel with a remote site which have network 192.168.0.0/24 network so it can access network 10.100.100.0/24 and reverse. Now i want to create another tunnel with another remote site that has also the same network , 192.168.0.0/24 with the first remote site. Is this possible ?
Thanks a lot
-
They need to NAT on their side. If those two sites need to communicate they both need to NAT.
This is why you don't deploy 192.168.0.0/24 into production.
-
They need to NAT on their side. If those two sites need to communicate they both need to NAT.
This is why you don't deploy 192.168.0.0/24 into production.
No need for both sides to communicate. So we need only nat on their Side ? In pfsense i will enter the nat subnet or ip in the interesting traffic ?
Thanks a lot
-
Their Phase 2:
Local: 192.168.0.0/24
NAT: 192.168.100.0/24
Remote: 10.100.100.0/24Your Phase 2:
Local: 10.100.100.0/24
Remote: 192.168.100.0/24To you, they will look like 192.168.100.0/24.
-
Thanks a lot for your help !