Bug or i do not know how to…?
-
PF:
1 wan (dchp) 192.168.2.* (ip is getting by dhcp from adsl router)
2 lan (dchp) 192.168.1.* (ip for pf is fixed, all other computers gets ip from this dhcp srv)I am trying to block lan traffic between this 2 separate LANs (wan(lan1) has own lan).
I tried to enter on lan firewall block all 192.168.1.0/8 192.168.2.0/8
whatever i do i can from lan2 connect to services on lan1? -
Maybe /16 or something else?
-
You don't say what rules you created where - remember that you block traffic leaving any network, though by default it won't allow WAN to LAN traffic. If you're seeing that then it sounds like you've added a default pass-all rule.
It would help if you posted a screen capture of the rules on the WAN interface.
-
I run into this all the time. the first thing that I do, is change the ASDL modem to bridge mode. This puts the external ip on the pfsense device. I have haveing a firewall behind a firewall.
The only time I have kept the orginal configuration is when I need a DMZ.
Any questions kept posting here or send me a internal email.
RC
-
@Cry:
You don't say what rules you created where - remember that you block traffic leaving any network, though by default it won't allow WAN to LAN traffic. If you're seeing that then it sounds like you've added a default pass-all rule.
It would help if you posted a screen capture of the rules on the WAN interface.
I change only mask on lan devices to /8 and now i can not touch another lan. Hmmm, maybe i didn' enable fw. Where should I click?
-
I run into this all the time. the first thing that I do, is change the ASDL modem to bridge mode. This puts the external ip on the pfsense device. I have haveing a firewall behind a firewall.
The only time I have kept the orginal configuration is when I need a DMZ.
Any questions kept posting here or send me a internal email.
RC
I am fine width router mode. Just want to know how to effective use firewall.