SOLVED_IPSEC with_EAP-MSCHAPv2, connected from Windows 10 but No Traffic at all
-
Hello to everyone,
This is my first post here, so , sorry if I miss something or if Im not clear enoughI've been using PFSense for 2 or 3 years…
In previous versions I was following this Guide to Configure IPSEC
https://doc.pfsense.org/index.php/IKEv2_with_EAP-MSCHAPv2In previous versions everything works fine and traffic flows with no problems.
After 2.3 upgrades… Client connects but , there is no way to ping to LAN servers from the client computer...
I was trying all kind of modifications in configuration... with no success...
I already create the Firewall RULES on IPSEC Tab with ,,, ...
There is something else Im missing ?? You can follow all the process i made I the link I posted..
Thanks for reading in advance...
(
-
I Solved looking at and playing with this things :
-
IN IPSEC - MOBILE CLIENT TAB ->Network configuration for Virtual Address Pool , using a totally diferent subnet ….
For example, if your LAN subnet is 192.168.0.X then use 10.1.1.0 or wharever... -
IN Windows 10… set "Use default gateway on remote NETWORK"
look at this on network connections... Properties ... ip v4 tcp/ip properties... advanced... IP Settings Tab
Hope this helps….
I spend a lot of time with this...
Best Regards...
-