<![CDATA[pfSense 2.3.2 on ZFS]]>Hello everybody!
There was a problem with installing pfSense 2.3.2 on ZFS
Installed 2.2.2 with the help of the official installer on ZFS
Then updated from the console to version 2.3.2
All works, only at loading it produces a message
ZFS: i / o error - all block copies unavailable  :'(
Then the system continues normal loading
Tell me how to fix this error?  :o

]]>https://forum.netgate.com/topic/113738/pfsense-2-3-2-on-zfsRSS for NodeSun, 19 Apr 2026 20:23:18 GMTWed, 29 Mar 2017 14:16:37 GMT60<![CDATA[Reply to pfSense 2.3.2 on ZFS on Thu, 30 Mar 2017 12:09:47 GMT]]>@ozia:

I have a task to do precisely 2.3.2 on ZFS, how can I do this?

Your task is not possible. The ZFS installation options were removed from 2.3 because they did not fully work properly, and we did not test or verify their functionality so manually configuring it has undefined, but potentially broken, behavior.

We added them back in 2.4 because we switched to the same installer used by FreeBSD and it was stable there.

Using ZFS on any version prior to 2.4 is not supported and is most likely going to not work or be unstable.

If it was going to work, the procedure you followed was your best chance. Since that didn't work, you're out of luck.

]]>https://forum.netgate.com/post/690089https://forum.netgate.com/post/690089Thu, 30 Mar 2017 12:09:47 GMT<![CDATA[Reply to pfSense 2.3.2 on ZFS on Thu, 30 Mar 2017 11:57:51 GMT]]>You don't. Simple.

]]>https://forum.netgate.com/post/690085https://forum.netgate.com/post/690085Thu, 30 Mar 2017 11:57:51 GMT<![CDATA[Reply to pfSense 2.3.2 on ZFS on Thu, 30 Mar 2017 10:00:58 GMT]]>I have a task to do precisely 2.3.2 on ZFS, how can I do this?

]]>https://forum.netgate.com/post/690072https://forum.netgate.com/post/690072Thu, 30 Mar 2017 10:00:58 GMT<![CDATA[Reply to pfSense 2.3.2 on ZFS on Wed, 29 Mar 2017 17:39:50 GMT]]>@ozia:

I want to stay on FreeBSD 10.3, and 2.3.3 and 2.4 is already on version 11

I use pfsense is also running hyper-v, version 2.3.3 and 2.4 do not work correctly on hyper-v

Since when? pfSense 2.4 works just fine on Hyper-V.

]]>https://forum.netgate.com/post/689946https://forum.netgate.com/post/689946Wed, 29 Mar 2017 17:39:50 GMT<![CDATA[Reply to pfSense 2.3.2 on ZFS on Wed, 29 Mar 2017 15:02:55 GMT]]>I want to stay on FreeBSD 10.3, and 2.3.3 and 2.4 is already on version 11

I use pfsense is also running hyper-v, version 2.3.3 and 2.4 do not work correctly on hyper-v

]]>https://forum.netgate.com/post/689916https://forum.netgate.com/post/689916Wed, 29 Mar 2017 15:02:55 GMT<![CDATA[Reply to pfSense 2.3.2 on ZFS on Wed, 29 Mar 2017 14:52:24 GMT]]>Use 2.4 if you want ZFS.

]]>https://forum.netgate.com/post/689915https://forum.netgate.com/post/689915Wed, 29 Mar 2017 14:52:24 GMT