URGENT Help required - NAT / Port Forwarding / VPN - WILL PAY

[ronniesmonasoutlook.com]

Hi Guys,

I have tried posting on this forum but no help yet. It's an urgent issue. I AM WILLING TO PAY (PayPal or Gift card).

I need help with setting up this new pfsense to do following.

• Port forward 80, 443, 20 and 21 to public IP (basically redirect all port 80 traffic that is received on it's public interface to another public IP somewhere else on internet).
• Initial setup for VPN (OpenVPN and IPSec site to site)

Please PM me with how much you will charge. I think it's 1 hour work along with show me how it's done. Only for 2 items mentioned above. I need it working ASAP.

I will greatly appreciate your help.

Thanks

[ronniesmonasoutlook.com]

A possibility of additional small tasks later that I can pay for each task.

Cummon … ppl .. please help. it's urgent.

;D ;D ;D ;D

[gandolf]

@RonS:

Hi Guys,

I have tried posting on this forum but no help yet. It's an urgent issue. I AM WILLING TO PAY (PayPal or Gift card).

I need help with setting up this new pfsense to do following.

• Port forward 80, 443, 20 and 21 to public IP (basically redirect all port 80 traffic that is received on it's public interface to another public IP somewhere else on internet).
• Initial setup for VPN (OpenVPN and IPSec site to site)

Please PM me with how much you will charge. I think it's 1 hour work along with show me how it's done. Only for 2 items mentioned above. I need it working ASAP.

I will greatly appreciate your help.

Thanks

The normal port forward wizard under firewall -> NAT -> port forward should be sufficient. The interface should be WAN, destination should be your target public IP. You may need add some firewall rules too.

[gandolf]

@RonS:

Hi Guys,

I have tried posting on this forum but no help yet. It's an urgent issue. I AM WILLING TO PAY (PayPal or Gift card).

I need help with setting up this new pfsense to do following.

• Port forward 80, 443, 20 and 21 to public IP (basically redirect all port 80 traffic that is received on it's public interface to another public IP somewhere else on internet).
• Initial setup for VPN (OpenVPN and IPSec site to site)

Please PM me with how much you will charge. I think it's 1 hour work along with show me how it's done. Only for 2 items mentioned above. I need it working ASAP.

I will greatly appreciate your help.

Thanks

Openvpn setup is also easy. Go to VPN -> openvpn, use the wizard guide to create the server, then on the server go to the client export tab in the openvpn section to get the client config file. Then go to your client machine, setup the client according to your exported client config. Done.

[isolatedvirus]

PM sent.