<![CDATA[Watchguard x750e pfsense 2.3.4 not supported(SOLVED)]]>Hello 2 all!
Today my pfsense inform me that it have an updates!
I did it before, so i run update from 2.3.3_1 to 2.3.4…
It was i BIG mistake from my side..

After update was complete, device going to reboot and thats all.
I connected to device with COM-serial port, and see next error when device is try to start

WARNING: / was not properly dismounted
WARNING: /: mount pending error: blocks 0 files 2

No problem for me. I have a fresh backup so i downloaded new 2.3.4 install image and do clean installation.
After install was complete i run it on PC and system start correctly.
After that - i insert HDD to my device and try to boot but every time with error.
I try select different settings(ACPI=OFF, Singleuser, sisable dma, etc) but still have next error:


/boot/kernel/kernel text=0x12493a0 data=0x851348+0x16c788 syms=[0x4+0xf7710+0x4+0x1701df]
Booting...
KDB: debugger backends: ddb
KDB: current backend: ddb
MP Configuration Table version 1.4 found at 0xc00f0c00
APIC: Using the MPTable enumerator.
SMP: Added CPU 0 (BSP)
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.3-RELEASE-p19 #0 bbfdb9a1d(RELENG_2_3_4): Wed May  3 16:35:52 CDT 2017
    root@ce23-i386-builder:/builder/pfsense-234/tmp/obj/builder/pfsense-234/tmp/FreeBSD-src/sys/pfSense_wrap_vga i386
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
Preloaded elf kernel "/boot/kernel/kernel" at 0xc2271000.
Calibrating TSC clock ... TSC clock: 1300071494 Hz
CPU: Intel(R) Celeron(R) M processor         1300MHz (1300.07-MHz 686-class CPU)
  Origin="GenuineIntel"  Id=0x695  Family=0x6  Model=0x9  Stepping=5
  Features=0xa7e9fbbf <fpu,vme,de,pse,tsc,msr,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,clflush,dts,acpi,mmx,fxsr,sse,sse2,tm,pbe>Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
Data TLB: 4 KB Pages, 4-way set associative, 128 entries
Instruction TLB: 4 MB pages, fully associative, 2 entries
2nd-level cache: 512 KB, 4-way set associative, 64 byte line size
1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
Data TLB: 4 MB Pages, 4-way set associative, 8 entries
1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
real memory  = 2139029504 (2039 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000002428000 - 0x000000007d5a4fff, 2065158144 bytes (504189 pages)
avail memory = 2064228352 (1968 MB)
MPTable: <oem00000 prod00000000="">Event timer "LAPIC" quality 400
LAPIC: ipi_wait() us multiplier 36 (r 36000332 tsc 1300071494)
bios32: Found BIOS32 Service Directory header at 0xc00f9920
bios32: Entry = 0xf9f30 (c00f9f30)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x9f60
pnpbios: Found PnP BIOS data at 0xc00faa50
pnpbios: Entry = f0000:aa80  Rev = 1.0
Other BIOS signatures found:
XEN: CPU 0 has VCPU ID 4294967295
Hardware, Intel Secure Key RNG: RDRAND is not present
Hardware, VIA Nehemiah Padlock RNG: VIA Padlock RNG not present
Falling back to <software, yarrow="">random adaptor
random: <software, yarrow="">initialized
ULE: setup cpu 0
ioapic0: Assuming intbase of 0
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: Routing IRQ 0 -> intpin 2
lapic: Routing ExtINT -> LINT0
lapic: Routing NMI -> LINT1
ioapic0 <version 2.0="">irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
firmware: 'iwn6050fw' version 0: 469780 bytes loaded at 0xc1c77fec
firmware: 'rt2561fw' version 0: 8192 bytes loaded at 0xc1d920e0
firmware: 'rt2561sfw' version 0: 8192 bytes loaded at 0xc1d94158
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
firmware: 'wpifw' version 153229: 150100 bytes loaded at 0xc1e28408
firmware: 'rt2661fw' version 0: 8192 bytes loaded at 0xc1d961d0
wlan: mac acl policy registered
firmware: 'rt2860fw' version 0: 8192 bytes loaded at 0xc1d98248
firmware: 't4fw_cfg' version 0: 3215 bytes loaded at 0xc1670bec
firmware: 't4fw_cfg_uwire' version 0: 21374 bytes loaded at 0xc167187b
firmware: 't4fw' version 0: 539648 bytes loaded at 0xc1676bf9
firmware: 't5fw_cfg' version 0: 3591 bytes loaded at 0xc16fa874
firmware: 't5fw' version 0: 593920 bytes loaded at 0xc16fb67b
wlan: <802.11 Link Layer>
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0817540, 0) error 1
firmware: 'rsu-rtl8712fw' version 120: 122328 bytes loaded at 0xc1decd08
firmware: 'runfw' version 0: 8192 bytes loaded at 0xc1e0ad9c
firmware: 'urtwn-rtl8188eufw' version 111: 13904 bytes loaded at 0xc1e0d374
firmware: 'urtwn-rtl8192cfwT' version 111: 16076 bytes loaded at 0xc1e10a3c
firmware: 'urtwn-rtl8192cfwU' version 111: 16076 bytes loaded at 0xc1e14980
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc08175f0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc08176a0, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xc083f090, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xc083f140, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xc083f1f0, 0) error 1
firmware: 'iwn1000fw' version 0: 337520 bytes loaded at 0xc18af58c
firmware: 'iwn2000fw' version 0: 695876 bytes loaded at 0xc1901c74
firmware: 'iwn2030fw' version 0: 707392 bytes loaded at 0xc19abb30
firmware: 'iwn4965fw' version 0: 187972 bytes loaded at 0xc1a586e8
firmware: 'iwn5000fw' version 0: 340696 bytes loaded at 0xc1a865a4
firmware: 'iwn5150fw' version 0: 337400 bytes loaded at 0xc1ad98f4
firmware: 'iwn6000fw' version 0: 454608 bytes loaded at 0xc1b2bf64
firmware: 'mw88W8363fw' version 0: 94940 bytes loaded at 0xc1cf1fd8
firmware: 'mwlboot' version 0: 2280 bytes loaded at 0xc1d092b4
firmware: 'mxge_eth_z8e' version 377284: 120629 bytes loaded at 0xc1d09cd4
firmware: 'mxge_ethp_z8e' version 387604: 121317 bytes loaded at 0xc1d27484
firmware: 'mxge_rss_eth_z8e' version 534724: 151912 bytes loaded at 0xc1d44ee4
firmware: 'mxge_rss_ethp_z8e' version 544468: 152837 bytes loaded at 0xc1d6a0c8
firmware: 'iwn6000g2afw' version 0: 444128 bytes loaded at 0xc1b9afac
firmware: 'iwn6000g2bfw' version 0: 460912 bytes loaded at 0xc1c07704
null: <null device,="" zero="" device="">nfslock: pseudo-device
crypto: <crypto core="">VESA: INT 0x10 vector 0xc000:0x0014
VESA: information block
0000   56 45 53 41 00 03 00 01 00 01 01 00 00 00 40 00
0010   00 01 7b 00 00 01 3d 01 00 01 4f 01 00 01 7d 01
0020   00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0030   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0040   60 01 61 01 62 01 63 01 64 01 65 01 66 01 67 01
0050   68 01 69 01 6a 01 6b 01 6c 01 6d 01 6e 01 6f 01
0060   70 01 71 01 3c 01 4d 01 5c 01 3a 01 4b 01 5a 01
0070   07 01 1a 01 1b 01 05 01 17 01 18 01 12 01 14 01
0080   15 01 01 01 03 01 11 01 ff ff 00 00 00 00 00 00
0090   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00a0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00b0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00c0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00d0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00e0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00f0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0100   49 6e 74 65 6c 28 72 29 39 31 35 47 4d 2f 39 31
0110   30 4d 4c 2f 39 31 35 4d 53 20 47 72 61 70 68 69
0120   63 73 20 43 68 69 70 20 41 63 63 65 6c 65 72 61
0130   74 65 64 20 56 47 41 20 42 49 4f 53 00 49 6e 74
0140   65 6c 20 43 6f 72 70 6f 72 61 74 69 6f 6e 00 49
0150   6e 74 65 6c 28 72 29 39 31 35 47 4d 2f 39 31 30
0160   4d 4c 2f 39 31 35 4d 53 20 47 72 61 70 68 69 63
0170   73 20 43 6f 6e 74 72 6f 6c 6c 65 72 00 48 61 72
0180   64 77 61 72 65 20 56 65 72 73 69 6f 6e 20 30 2e
0190   30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01a0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01b0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01c0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01d0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01e0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01f0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 9 mode(s) found
VESA: v3.0, 7872k memory, flags:0x1, mode table:0xe27ae040 (1000040)
VESA: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
VESA: Intel Corporation Intel(r)915GM/910ML/915MS Graphics Controller Hardware Version 0.0
VMBUS: load
io: _kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>Pentium Pro MTRR support enabled
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
hptnr: R750/DC7280 controller driver v1.1.4
hpt27xx: RocketRAID 27xx controller driver v1.2.7
cryptosoft0: <software crypto="">on motherboard
crypto: assign cryptosoft0 driver id 0, flags 100663296
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
padlock0: No ACE support.
pci_open(1):    mode 1 addr port (0x0cf8) is 0x8000f904
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=060000] [hdr=00] is there (id=25908086)
pcibios: BIOS version 3.00
PCIe: Memory Mapped configuration base @ 0xe0000000
pcib0: <mptable host-pci="" bridge="">pcibus 0 on motherboard
pci0: <pci bus="">on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x2590, revid=0x04
        domain=0, bus=0, slot=0, func=0
        class=06-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2592, revid=0x04
        domain=0, bus=0, slot=2, func=0
        class=03-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D3  current D0
        map[10]: type Memory, range 32, base 0xd0500000, size 19, enabled
        map[14]: type I/O Port, range 32, base 0xda00, size  3, enabled
        map[18]: type Prefetchable Memory, range 32, base 0xc0000000, size 28, enabled
        map[1c]: type Memory, range 32, base 0xd0580000, size 18, enabled
pcib0: slot 2 INTA routed to irq 16
found-> vendor=0x8086, dev=0x2660, revid=0x04
        domain=0, bus=0, slot=28, func=0
        class=06-04-00, hdrtype=0x01, mfdev=1
        cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message
pcib0: slot 28 INTA routed to irq 16
        secbus=1, subbus=1
found-> vendor=0x8086, dev=0x2662, revid=0x04
        domain=0, bus=0, slot=28, func=1
        class=06-04-00, hdrtype=0x01, mfdev=1
        cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=12
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message
pcib0: slot 28 INTB routed to irq 17
        secbus=2, subbus=2
found-> vendor=0x8086, dev=0x2664, revid=0x04
        domain=0, bus=0, slot=28, func=2
        class=06-04-00, hdrtype=0x01, mfdev=1
        cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=c, irq=5
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message
pcib0: slot 28 INTC routed to irq 18
        secbus=3, subbus=3
found-> vendor=0x8086, dev=0x2666, revid=0x04
        domain=0, bus=0, slot=28, func=3
        class=06-04-00, hdrtype=0x01, mfdev=1
        cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=d, irq=10
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message
pcib0: slot 28 INTD routed to irq 19
        secbus=4, subbus=4
found-> vendor=0x8086, dev=0x2658, revid=0x04
        domain=0, bus=0, slot=29, func=0
        class=0c-03-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=9
        map[20]: type I/O Port, range 32, base 0xdb00, size  5, enabled
pcib0: slot 29 INTA routed to irq 23
found-> vendor=0x8086, dev=0x2659, revid=0x04
        domain=0, bus=0, slot=29, func=1
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=10
        map[20]: type I/O Port, range 32, base 0xdd00, size  5, enabled
pcib0: slot 29 INTB routed to irq 19
found-> vendor=0x8086, dev=0x265a, revid=0x04
        domain=0, bus=0, slot=29, func=2
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=c, irq=5
        map[20]: type I/O Port, range 32, base 0xd800, size  5, enabled
pcib0: slot 29 INTC routed to irq 18
found-> vendor=0x8086, dev=0x265b, revid=0x04
        domain=0, bus=0, slot=29, func=3
        class=0c-03-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=d, irq=11
        map[20]: type I/O Port, range 32, base 0xd900, size  5, enabled
pcib0: slot 29 INTD routed to irq 16
found-> vendor=0x8086, dev=0x265c, revid=0x04
        domain=0, bus=0, slot=29, func=7
        class=0c-03-20, hdrtype=0x00, mfdev=0
        cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=9
        powerspec 2  supports D0 D3  current D0
        map[10]: type Memory, range 32, base 0xd05c0000, size 10, enabled
pcib0: slot 29 INTA routed to irq 23
found-> vendor=0x8086, dev=0x2448, revid=0xd4
        domain=0, bus=0, slot=30, func=0
        class=06-04-01, hdrtype=0x01, mfdev=0
        cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        secbus=5, subbus=5
found-> vendor=0x8086, dev=0x2641, revid=0x04
        domain=0, bus=0, slot=31, func=0
        class=06-01-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x266f, revid=0x04
        domain=0, bus=0, slot=31, func=1
        class=01-01-8a, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=255
        map[20]: type I/O Port, range 32, base 0xf000, size  4, enabled
found-> vendor=0x8086, dev=0x266a, revid=0x04
        domain=0, bus=0, slot=31, func=3
        class=0c-05-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=10
        map[20]: type I/O Port, range 32, base 0x500, size  5, enabled
pcib0: slot 31 INTB routed to irq 19
vgapci0: <vga-compatible display="">port 0xda00-0xda07 mem 0xd0500000-0xd057ffff,0xc0000000-0xcfffffff,0xd0580000-0xd05bffff irq 16 at device 2.0 on pci0
agp0: <intel 82915gm="" (915gm="" gmch)="" svga="" controller="">on vgapci0
agp0: Found already configured flush page at 0xfed13000
agp0: Allocated flush page phys 0xfed13000 virt 0xe27d9000
agp0: aperture size is 256M, detected 7932k stolen memory
agp0: AGP_I810_PGTBL_CTL: 7ffc0001
agp0: AGP_I855_GCC1: 0x30
agp0: AGP_I915_MSAC: 0xd1
agp0: Mappable GTT entries: 65536
agp0: Total GTT entries: 65536
vgapci0: Boot video device
pcib1: <mptable pci-pci="" bridge="">irq 16 at device 28.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x7000-0x7fff
pcib1:   memory decode     0xd0000000-0xd00fffff
pci1: <pci bus="">on pcib1
pcib1: allocated bus range (1-1) for rid 0 of pci1
pci1: domain=0, physical bus=1
found-> vendor=0x11ab, dev=0x4362, revid=0x19
        domain=0, bus=1, slot=0, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D1 D2 D3  current D0
        MSI supports 2 messages, 64 bit
        map[10]: type Memory, range 64, base 0xd0020000, size 14, enabled
pcib1: allocated memory range (0xd0020000-0xd0023fff) for rid 10 of pci0:1:0:0
        map[18]: type I/O Port, range 32, base 0x7000, size  8, enabled
pcib1: allocated I/O port range (0x7000-0x70ff) for rid 18 of pci0:1:0:0
pcib1: slot 0 INTA routed to irq 16
mskc0: <marvell yukon="" 88e8053="" gigabit="" ethernet="">port 0x7000-0x70ff mem 0xd0020000-0xd0023fff irq 16 at device 0.0 on pci1
mskc0: MSI count : 2
mskc0: attempting to allocate 1 MSI vectors (2 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 48
mskc0: using IRQ 256 for MSI
mskc0: RAM buffer size : 48KB
mskc0: Port 0 : Rx Queue 32KB(0x00000000:0x00007fff)
mskc0: Port 0 : Tx Queue 16KB(0x00008000:0x0000bfff)
msk0: <marvell technology="" group="" ltd.="" yukon="" ec="" id="" 0xb6="" rev="" 0x02="">on mskc0
msk0: Using defaults for TSO: 65518/35/2048
msk0: bpf attached
msk0: Ethernet address: 00:90:7f:43:6d:fd
miibus0: <mii bus="">on msk0
e1000phy0: <marvell 88e1111="" gigabit="" phy="">PHY 0 on miibus0
e1000phy0: OUI 0x000ac2, model 0x000c, rev. 2
e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
pcib2: <mptable pci-pci="" bridge="">irq 17 at device 28.1 on pci0
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0x8000-0x8fff
pcib2:   memory decode     0xd0100000-0xd01fffff
pci2: <pci bus="">on pcib2
pcib2: allocated bus range (2-2) for rid 0 of pci2
pci2: domain=0, physical bus=2
found-> vendor=0x11ab, dev=0x4362, revid=0x19
        domain=0, bus=2, slot=0, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=12
        powerspec 2  supports D0 D1 D2 D3  current D0
        MSI supports 2 messages, 64 bit
        map[10]: type Memory, range 64, base 0xd0120000, size 14, enabled
pcib2: allocated memory range (0xd0120000-0xd0123fff) for rid 10 of pci0:2:0:0
        map[18]: type I/O Port, range 32, base 0x8000, size  8, enabled
pcib2: allocated I/O port range (0x8000-0x80ff) for rid 18 of pci0:2:0:0
pcib2: slot 0 INTA routed to irq 17
mskc1: <marvell yukon="" 88e8053="" gigabit="" ethernet="">port 0x8000-0x80ff mem 0xd0120000-0xd0123fff irq 17 at device 0.0 on pci2
mskc1: MSI count : 2
mskc1: attempting to allocate 1 MSI vectors (2 supported)
msi: routing MSI IRQ 257 to local APIC 0 vector 49
mskc1: using IRQ 257 for MSI
mskc1: RAM buffer size : 48KB
mskc1: Port 0 : Rx Queue 32KB(0x00000000:0x00007fff)
mskc1: Port 0 : Tx Queue 16KB(0x00008000:0x0000bfff)
msk1: <marvell technology="" group="" ltd.="" yukon="" ec="" id="" 0xb6="" rev="" 0x02="">on mskc1
msk1: Using defaults for TSO: 65518/35/2048
msk1: bpf attached
msk1: Ethernet address: 00:90:7f:43:6d:fc
miibus1: <mii bus="">on msk1
e1000phy1: <marvell 88e1111="" gigabit="" phy="">PHY 0 on miibus1
e1000phy1: OUI 0x000ac2, model 0x000c, rev. 2
e1000phy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
pcib3: <mptable pci-pci="" bridge="">irq 18 at device 28.2 on pci0
pcib3:   domain            0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   I/O decode        0x9000-0x9fff
pcib3:   memory decode     0xd0200000-0xd02fffff
pci3: <pci bus="">on pcib3
pcib3: allocated bus range (3-3) for rid 0 of pci3
pci3: domain=0, physical bus=3
found-> vendor=0x11ab, dev=0x4362, revid=0x19
        domain=0, bus=3, slot=0, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=5
        powerspec 2  supports D0 D1 D2 D3  current D0
        MSI supports 2 messages, 64 bit
        map[10]: type Memory, range 64, base 0xd0220000, size 14, enabled
pcib3: allocated memory range (0xd0220000-0xd0223fff) for rid 10 of pci0:3:0:0
        map[18]: type I/O Port, range 32, base 0x9000, size  8, enabled
pcib3: allocated I/O port range (0x9000-0x90ff) for rid 18 of pci0:3:0:0
pcib3: slot 0 INTA routed to irq 18
mskc2: <marvell yukon="" 88e8053="" gigabit="" ethernet="">port 0x9000-0x90ff mem 0xd0220000-0xd0223fff irq 18 at device 0.0 on pci3
mskc2: MSI count : 2
mskc2: attempting to allocate 1 MSI vectors (2 supported)
msi: routing MSI IRQ 258 to local APIC 0 vector 50
mskc2: using IRQ 258 for MSI
mskc2: RAM buffer size : 48KB
mskc2: Port 0 : Rx Queue 32KB(0x00000000:0x00007fff)
mskc2: Port 0 : Tx Queue 16KB(0x00008000:0x0000bfff)
msk2: <marvell technology="" group="" ltd.="" yukon="" ec="" id="" 0xb6="" rev="" 0x02="">on mskc2
msk2: Using defaults for TSO: 65518/35/2048
msk2: bpf attached
msk2: Ethernet address: 00:90:7f:43:6d:fb
miibus2: <mii bus="">on msk2
e1000phy2: <marvell 88e1111="" gigabit="" phy="">PHY 0 on miibus2
e1000phy2: OUI 0x000ac2, model 0x000c, rev. 2
e1000phy2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
pcib4: <mptable pci-pci="" bridge="">irq 19 at device 28.3 on pci0
pcib4:   domain            0
pcib4:   secondary bus     4
pcib4:   subordinate bus   4
pcib4:   I/O decode        0xa000-0xafff
pcib4:   memory decode     0xd0300000-0xd03fffff
pci4: <pci bus="">on pcib4
pcib4: allocated bus range (4-4) for rid 0 of pci4
pci4: domain=0, physical bus=4
found-> vendor=0x11ab, dev=0x4362, revid=0x19
        domain=0, bus=4, slot=0, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D1 D2 D3  current D0
        MSI supports 2 messages, 64 bit
        map[10]: type Memory, range 64, base 0xd0320000, size 14, enabled
pcib4: allocated memory range (0xd0320000-0xd0323fff) for rid 10 of pci0:4:0:0
        map[18]: type I/O Port, range 32, base 0xa000, size  8, enabled
pcib4: allocated I/O port range (0xa000-0xa0ff) for rid 18 of pci0:4:0:0
pcib4: slot 0 INTA routed to irq 19
mskc3: <marvell yukon="" 88e8053="" gigabit="" ethernet="">port 0xa000-0xa0ff mem 0xd0320000-0xd0323fff irq 19 at device 0.0 on pci4
mskc3: MSI count : 2
mskc3: attempting to allocate 1 MSI vectors (2 supported)
msi: routing MSI IRQ 259 to local APIC 0 vector 51
mskc3: using IRQ 259 for MSI
mskc3: RAM buffer size : 48KB
mskc3: Port 0 : Rx Queue 32KB(0x00000000:0x00007fff)
mskc3: Port 0 : Tx Queue 16KB(0x00008000:0x0000bfff)
msk3: <marvell technology="" group="" ltd.="" yukon="" ec="" id="" 0xb6="" rev="" 0x02="">on mskc3
msk3: Using defaults for TSO: 65518/35/2048
msk3: bpf attached
msk3: Ethernet address: 00:90:7f:43:6d:fa
miibus3: <mii bus="">on msk3
e1000phy3: <marvell 88e1111="" gigabit="" phy="">PHY 0 on miibus3
e1000phy3: OUI 0x000ac2, model 0x000c, rev. 2
e1000phy3:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
uhci0: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-a="">port 0xdb00-0xdb1f irq 23 at device 29.0 on pci0
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 52
usbus0 on uhci0
uhci0: usbpf: Attached
uhci1: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-b="">port 0xdd00-0xdd1f irq 19 at device 29.1 on pci0
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 53
usbus1 on uhci1
uhci1: usbpf: Attached
uhci2: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-c="">port 0xd800-0xd81f irq 18 at device 29.2 on pci0
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 54
usbus2 on uhci2
uhci2: usbpf: Attached
uhci3: <intel 82801fb="" fr="" fw="" frw="" (ich6)="" usb="" controller="" usb-d="">port 0xd900-0xd91f irq 16 at device 29.3 on pci0
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 55
usbus3 on uhci3
uhci3: usbpf: Attached
ehci0: <intel 82801fb="" (ich6)="" usb="" 2.0="" controller="">mem 0xd05c0000-0xd05c03ff irq 23 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
ehci0: usbpf: Attached
pcib5: <mptable pci-pci="" bridge="">at device 30.0 on pci0
pcib5:   domain            0
pcib5:   secondary bus     5
pcib5:   subordinate bus   5
pcib5:   I/O decode        0xb000-0xcfff
pcib5:   memory decode     0xd0400000-0xd04fffff
pcib5:   special decode    subtractive
pci5: <pci bus="">on pcib5
pcib5: allocated bus range (5-5) for rid 0 of pci5
pci5: domain=0, physical bus=5
found-> vendor=0x11ab, dev=0x4320, revid=0x13
        domain=0, bus=5, slot=0, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
        lattimer=0x60 (2880 ns), mingnt=0x17 (5750 ns), maxlat=0x1f (7750 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type Memory, range 32, base 0xd042c000, size 14, enabled
pcib5: allocated memory range (0xd042c000-0xd042ffff) for rid 10 of pci0:5:0:0
        map[14]: type I/O Port, range 32, base 0xb000, size  8, enabled
pcib5: allocated I/O port range (0xb000-0xb0ff) for rid 14 of pci0:5:0:0
pcib5: slot 0 INTA routed to irq 16
found-> vendor=0x11ab, dev=0x4320, revid=0x13
        domain=0, bus=5, slot=1, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
        lattimer=0x60 (2880 ns), mingnt=0x17 (5750 ns), maxlat=0x1f (7750 ns)
        intpin=a, irq=12
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type Memory, range 32, base 0xd0420000, size 14, enabled
pcib5: allocated memory range (0xd0420000-0xd0423fff) for rid 10 of pci0:5:1:0
        map[14]: type I/O Port, range 32, base 0xb400, size  8, enabled
pcib5: allocated I/O port range (0xb400-0xb4ff) for rid 14 of pci0:5:1:0
pcib5: slot 1 INTA routed to irq 17
found-> vendor=0x11ab, dev=0x4320, revid=0x13
        domain=0, bus=5, slot=2, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
        lattimer=0x60 (2880 ns), mingnt=0x17 (5750 ns), maxlat=0x1f (7750 ns)
        intpin=a, irq=5
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type Memory, range 32, base 0xd0424000, size 14, enabled
pcib5: allocated memory range (0xd0424000-0xd0427fff) for rid 10 of pci0:5:2:0
        map[14]: type I/O Port, range 32, base 0xb800, size  8, enabled
pcib5: allocated I/O port range (0xb800-0xb8ff) for rid 14 of pci0:5:2:0
pcib5: slot 2 INTA routed to irq 18
found-> vendor=0x11ab, dev=0x4320, revid=0x13
        domain=0, bus=5, slot=3, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
        lattimer=0x60 (2880 ns), mingnt=0x17 (5750 ns), maxlat=0x1f (7750 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type Memory, range 32, base 0xd0428000, size 14, enabled
pcib5: allocated memory range (0xd0428000-0xd042bfff) for rid 10 of pci0:5:3:0
        map[14]: type I/O Port, range 32, base 0xbc00, size  8, enabled
pcib5: allocated I/O port range (0xbc00-0xbcff) for rid 14 of pci0:5:3:0
pcib5: slot 3 INTA routed to irq 19
found-> vendor=0x177d, dev=0x0003, revid=0x00
        domain=0, bus=5, slot=4, func=0
        class=10-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
        lattimer=0x60 (2880 ns), mingnt=0x40 (16000 ns), maxlat=0x40 (16000 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message, 64 bit
        map[10]: type I/O Port, range 32, base 0xc000, size  8, enabled
pcib5: allocated I/O port range (0xc000-0xc0ff) for rid 10 of pci0:5:4:0
        map[18]: type I/O Port, range 32, base 0xc400, size  8, enabled
pcib5: allocated I/O port range (0xc400-0xc4ff) for rid 18 of pci0:5:4:0
pcib5: slot 4 INTA routed to irq 20
skc0: <marvell gigabit="" ethernet="">port 0xb000-0xb0ff mem 0xd042c000-0xd042ffff irq 16 at device 0.0 on pci5
skc0: interrupt moderation is 100 us
skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
skc0: chip ver  = 0xb1
skc0: chip rev  = 0x09
skc0: SK_EPROM0 = 0x10
skc0: SRAM size = 0x010000
sk0: <marvell semiconductor,="" inc.="" yukon="">on skc0
sk0: bpf attached
sk0: Ethernet address: 00:90:7f:43:6d:f9
miibus4: <mii bus="">on sk0
e1000phy4: <marvell 88e1011="" gigabit="" phy="">PHY 0 on miibus4
e1000phy4: OUI 0x000ac2, model 0x0002, rev. 5
e1000phy4:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
skc1: <marvell gigabit="" ethernet="">port 0xb400-0xb4ff mem 0xd0420000-0xd0423fff irq 17 at device 1.0 on pci5
skc1: interrupt moderation is 100 us
skc1: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
skc1: chip ver  = 0xb1
skc1: chip rev  = 0x09
skc1: SK_EPROM0 = 0x10
skc1: SRAM size = 0x010000
sk1: <marvell semiconductor,="" inc.="" yukon="">on skc1
sk1: bpf attached
sk1: Ethernet address: 00:90:7f:43:6d:f8
miibus5: <mii bus="">on sk1
e1000phy5: <marvell 88e1011="" gigabit="" phy="">PHY 0 on miibus5
e1000phy5: OUI 0x000ac2, model 0x0002, rev. 5
e1000phy5:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 56
skc2: <marvell gigabit="" ethernet="">port 0xb800-0xb8ff mem 0xd0424000-0xd0427fff irq 18 at device 2.0 on pci5
skc2: interrupt moderation is 100 us
skc2: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
skc2: chip ver  = 0xb1
skc2: chip rev  = 0x09
skc2: SK_EPROM0 = 0x10
skc2: SRAM size = 0x010000
sk2: <marvell semiconductor,="" inc.="" yukon="">on skc2
sk2: bpf attached
sk2: Ethernet address: 00:90:7f:43:6d:f7
miibus6: <mii bus="">on sk2
e1000phy6: <marvell 88e1011="" gigabit="" phy="">PHY 0 on miibus6
e1000phy6: OUI 0x000ac2, model 0x0002, rev. 5
e1000phy6:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
skc3: <marvell gigabit="" ethernet="">port 0xbc00-0xbcff mem 0xd0428000-0xd042bfff irq 19 at device 3.0 on pci5
skc3: interrupt moderation is 100 us
skc3: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
skc3: chip ver  = 0xb1
skc3: chip rev  = 0x09
skc3: SK_EPROM0 = 0x10
skc3: SRAM size = 0x010000
sk3: <marvell semiconductor,="" inc.="" yukon="">on skc3
sk3: bpf attached
sk3: Ethernet address: 00:90:7f:43:6d:f6
miibus7: <mii bus="">on sk3
e1000phy7: <marvell 88e1011="" gigabit="" phy="">PHY 0 on miibus7
e1000phy7: OUI 0x000ac2, model 0x0002, rev. 5
e1000phy7:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
pci5: <encrypt decrypt,="" network="" computer="" crypto="">at device 4.0 (no driver attached)
isab0: <pci-isa bridge="">at device 31.0 on pci0
isa0: <isa bus="">on isab0
atapci0: <intel ich6="" udma100="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0
ata0: <ata channel="">at channel 0 on atapci0
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 57
ata1: <ata channel="">at channel 1 on atapci0
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 58
pci0: <serial bus,="" smbus="">at device 31.3 (no driver attached)
cpu0 on motherboard
ahc_isa_identify 0: ioport 0xc00 alloc failed
ahc_isa_identify 1: ioport 0x1c00 alloc failed
ahc_isa_identify 2: ioport 0x2c00 alloc failed
ahc_isa_identify 3: ioport 0x3c00 alloc failed
ahc_isa_identify 4: ioport 0x4c00 alloc failed
ahc_isa_identify 5: ioport 0x5c00 alloc failed
ahc_isa_identify 6: ioport 0x6c00 alloc failed
ahc_isa_identify 7: ioport 0x7c00 alloc failed
ahc_isa_identify 8: ioport 0x8c00 alloc failed
ahc_isa_identify 9: ioport 0x9c00 alloc failed
ahc_isa_identify 10: ioport 0xac00 alloc failed
ahc_isa_identify 11: ioport 0xbc00 alloc failed
ahc_isa_identify 12: ioport 0xcc00 alloc failed
ahc_isa_identify 13: ioport 0xdc00 alloc failed
ahc_isa_identify 14: ioport 0xec00 alloc failed
ex_isa_identify()
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
pnpbios: 14 devices, largest 92 bytes
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x81-0x83, size=0x3, align=0
PNP0200: adding io range 0x87-0x87, size=0x1, align=0
PNP0200: adding io range 0x89-0x8b, size=0x3, align=0
PNP0200: adding io range 0x8f-0x91, size=0x3, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
pnpbios: handle 4 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
pnpbios: handle 6 device ID PNP0c04 (040cd041)
INT0800: adding fixed memory32 range 0xffb80000-0xffbfffff, size=0x80000
pnpbios: handle 7 device ID INT0800 (0008d425)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xffb00000-0xffb7ffff, size=0x80000
PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
PNP0c01: adding fixed memory32 range 0xfec00000-0xfec0ffff, size=0x10000
PNP0c01: adding fixed memory32 range 0xfee00000-0xfee0ffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0xffffff, size=0xf00000
pnpbios: handle 8 device ID PNP0c01 (010cd041)
PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf8000-0xfffff, size=0x8000
PNP0c02: adding fixed memory32 range 0xce800-0xcffff, size=0x1800
pnpbios: handle 9 device ID PNP0c02 (020cd041)
PNP0a03: adding io range 0x294-0x297, size=0x4, align=0
PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
PNP0a03: adding io range 0x400-0x4bf, size=0xc0, align=0
pnpbios: handle 10 device ID PNP0a03 (030ad041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
pnpbios: handle 12 device ID PNP0501 (0105d041)
PNP0400: adding irq mask 0x80
PNP0400: adding io range 0x378-0x37f, size=0x8, align=0
PNP0400: adding io range 0x778-0x77b, size=0x4, align=0
pnpbios: handle 13 device ID PNP0400 (0004d041)
PNP0501: adding irq mask 0x8
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0
pnpbios: handle 15 device ID PNP0501 (0105d041)
isa_probe_children: disabling PnP devices
pmtimer0 on isa0
attimer0: <at timer="">at port 0x40-0x43 irq 0 pnpid PNP0100 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 59
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <at realtime="" clock="">at port 0x70-0x71 irq 8 pnpid PNP0b00 on isa0
atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 60
Event timer "RTC" frequency 32768 Hz quality 0
atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 irq 1 pnpid PNP0303 on isa0
atkbd0: <at keyboard="">irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 61
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
(null) failed to probe at port 0x61 pnpid PNP0800 on isa0
(null) failed to probe at iomem 0xffb80000-0xffbfffff pnpid INT0800 on isa0
unknown: <pnp0c01>can't assign resources (memory)
unknown: <pnp0c01>at iomem 0-0x9ffff pnpid PNP0c01 on isa0
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 pnpid PNP0501 on isa0
uart0: console (115200,n,8,1)
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 62
uart0: fast interrupt
uart0: PPS capture mode: DCDinvalid
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <standard parallel="" printer="" port="">at port 0x378-0x37f,0x778-0x77b irq 7 pnpid PNP0400 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 0 vector 63
ppbus0: <parallel port="" bus="">on ppc0
lpt0: <printer>on ppbus0
lpt0: Interrupt-driven port
ppi0: <parallel i="" o="">on ppbus0
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 pnpid PNP0501 on isa0
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 64
uart1: fast interrupt
uart1: PPS capture mode: DCDinvalid
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
uart: uart1 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <isa option="" rom="">at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0
sc0: <system console="">at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
wbwd0 failed to probe on isa0
isa_probe_children: probing PnP devices
unknown: <pnp0c01>can't assign resources (memory)
unknown: <pnp0c01>at iomem 0-0x9ffff pnpid PNP0c01 on isa0
Device configuration finished.
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
procfs registered
lapic: Divisor 2, Frequency 50002830 Hz
Timecounters tick every 1.000 msec
pflog0: bpf attached
crypto: <crypto device="">vlan: initialized, using hash tables with chaining
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 16384
IPsec: Initialized Security Association Processing.
pfsync0: bpf attached
lo0: bpf attached
enc0: bpf attached
hptrr: no controller detected.
hptnr: no controller detected.
hpt27xx: no controller detected.
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
ugen0.1: <intel>at usbus0
uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
ugen1.1: <intel>at usbus1
uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
ugen2.1: <intel>at usbus2
uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus2
ugen3.1: <intel>at usbus3
uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus3
usbus4: 480Mbps High Speed USB v2.0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1
ugen4.1: <intel>at usbus4
uhub4: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus4
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 8 ports with 8 removable, self powered
pass0 at ata0 bus 0 scbus0 target 0 lun 0
pass0: <st1000lm024 hn-m101mbb="" 2ar20002="">ATA8-ACS SATA 2.x device
pass0: Serial Number S2SMJ9CDB13852
pass0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <st1000lm024 hn-m101mbb="" 2ar20002="">ATA8-ACS SATA 2.x device
ada0: Serial Number S2SMJ9CDB13852
ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0: 953869MB (1953525168 512 byte sectors)
ada0: Previously was known as ad0
GEOM: new disk ada0
Timecounter "TSC" frequency 1300071494 Hz quality 800
GEOM_PART: partition 1 on (ada0, MBR) is not aligned on 4096 bytes
GEOM_PART: partition 1 on (ada0s1, BSD) is not aligned on 4096 bytes
GEOM_PART: partition 2 on (ada0s1, BSD) is not aligned on 4096 bytes
GEOM_PART: partition 1 on (diskid/DISK-S2SMJ9CDB13852, MBR) is not aligned on 4096 bytes
GEOM_PART: partition 1 on (diskid/DISK-S2SMJ9CDB13852s1, BSD) is not aligned on 4096 bytes
GEOM_PART: partition 2 on (diskid/DISK-S2SMJ9CDB13852s1, BSD) is not aligned on 4096 bytes
Trying to mount root from ufs:/dev/ufsid/59100aebef9b520c [rw]...
WARNING: / was not properly dismounted
start_init: trying /sbin/init
GEOM_PART: partition 1 on (diskid/DISK-S2SMJ9CDB13852, MBR) is not aligned on 4096 bytes
GEOM_PART: partition 1 on (diskid/DISK-S2SMJ9CDB13852s1, BSD) is not aligned on 4096 bytes
GEOM_PART: partition 2 on (diskid/DISK-S2SMJ9CDB13852s1, BSD) is not aligned on 4096 bytes
mode = 0100666, inum = 8507143, fs = /
panic: ffs_valloc: dup alloc
cpuid = 0
KDB: enter: panic
[ thread pid 312 tid 100088 ]
Stopped at      kdb_enter+0x3d: movl    $0,kdb_why
db:0:kdb.enter.default> textdump set
textdump set
db:0:kdb.enter.default>  capture on
db:0:kdb.enter.default>  run lockinfo
db:1:lockinfo> show locks
No such command
db:1:locks>  show alllocks
No such command
db:1:alllocks>  show lockedvnods
Locked vnodes

0xc801911c: tag ufs, type VDIR
    usecount 1, writecount 0, refcount 3 mountedhere 0
    flags (VI_ACTIVE)
    v_object 0xc7dff6b4 ref 0 pages 1 cleanbuf 0 dirtybuf 1
    lock type ufs: EXCL by thread 0xc7de4320 (pid 312, php-fpm, tid 100088)
        ino 8507136, on dev ufsid/59100aebef9b520c

0xc806a354: tag ufs, type VREG
    usecount 1, writecount 0, refcount 1 mountedhere 0
    flags (VI_ACTIVE)
    lock type ufs: EXCL by thread 0xc7de4320 (pid 312, php-fpm, tid 100088)
        ino 8507143, on dev ufsid/59100aebef9b520c
db:0:kdb.enter.default>  show pcpu
cpuid        = 0
dynamic pcpu = 0x58c700
curthread    = 0xc7de4320: pid 312 "php-fpm"
curpcb       = 0xeba8cd40
fpcurthread  = 0xc7de4320: pid 312 "php-fpm"
idlethread   = 0xc7713000: tid 100003 "idle: cpu0"
APIC ID      = 0
currentldt   = 0x50
db:0:kdb.enter.default>  bt
Tracing pid 312 tid 100088 td 0xc7de4320
kdb_enter(c145f716,c145f716,c1492c3b,eba8c7b4,0,...) at kdb_enter+0x3d/frame 0xeba8c760
vpanic(c1492c3b,eba8c7b4,eba8c7b4,eba8c830,c0fe6ef1,...) at vpanic+0x13b/frame 0xeba8c794
panic(c1492c3b,81b6,81cf07,c7dc80d4,81a4,...) at panic+0x1b/frame 0xeba8c7a8
ffs_valloc(c801911c,81a4,c7dc1e80,eba8c874,0,...) at ffs_valloc+0x961/frame 0xeba8c830
ufs_makeinode(eba8cb88,eba8cb9c,c801911c,eba8cb40,eba8ca00,...) at ufs_makeinode+0x73/frame 0xeba8c9b0
ufs_create(eba8caa8,0,0,c1e982b0,c801911c,...) at ufs_create+0x30/frame 0xeba8c9d4
VOP_CREATE_APV(c1e82d80,eba8caa8,2,c79d89fc,1c,...) at VOP_CREATE_APV+0x95/frame 0xeba8ca00
vn_open_cred(eba8cb40,eba8cbcc,1a4,0,c7dc1e80,c7deb428) at vn_open_cred+0x2ae/frame 0xeba8cad0
vn_open(eba8cb40,eba8cbcc,1a4,c7deb428,28c35e04,...) at vn_open+0x3d/frame 0xeba8caf8
kern_openat(c7de4320,ffffff9c,28c35e04,0,601,1b6) at kern_openat+0x310/frame 0xeba8cbf0
sys_openat(c7de4320,eba8cca8,c8038308,c1f67580,18,...) at sys_openat+0x3a/frame 0xeba8cc18
syscall(eba8cce8) at syscall+0x5c9/frame 0xeba8ccdc
Xint0x80_syscall() at Xint0x80_syscall+0x2f/frame 0xeba8ccdc
--- syscall (499, FreeBSD ELF32, sys_openat), eip = 0x28730093, esp = 0xbfbfa370, ebp = 0xbfbfa394 ---
db:0:kdb.enter.default>  ps
  pid  ppid  pgrp   uid   state   wmesg     wchan    cmd
  313    21    21     0  S+      sbwait   0xc806e408 fcgicli
  312   311   311     0  R       CPU 0               php-fpm
  311     1   311     0  Ss      kqread   0xc802f900 php-fpm
   55     0     0     0  DL      mdwait   0xc7d82800 [md0]
   21     1    21     0  Ss+     pause    0xc7d9597c sh
   20     0     0     0  DL      vlruwt   0xc7d95c20 [vnlru]
   19     0     0     0  DL      syncer   0xc1f7a6c4 [syncer]
   18     0     0     0  RL      (threaded)          [bufdaemon]
100082                   RunQ                        [/ worker]
100075                   D       psleep   0xc1f79e04 [bufdaemon]
   17     0     0     0  DL      pgzero   0xc1f848a8 [pagezero]
    9     0     0     0  DL      pollid   0xc1f59eb0 [idlepoll]
    8     0     0     0  DL      psleep   0xc1f845c4 [vmdaemon]
    7     0     0     0  DL      (threaded)          [pagedaemon]
100078                   D       umarcl   0xc1f841a4 [uma]
100071                   D       psleep   0xc1fe5504 [pagedaemon]
    6     0     0     0  DL      waiting_ 0xc1fdfe74 [sctp_iterator]
    5     0     0     0  DL      pftm     0xc0f7b2b0 [pf purge]
   16     0     0     0  DL      (threaded)          [usb]
100057                   D       -        0xc7923d64 [usbus4]
100056                   D       -        0xc7923d34 [usbus4]
100055                   D       -        0xc7923d04 [usbus4]
100054                   D       -        0xc7923cd4 [usbus4]
100053                   D       -        0xc7923ca4 [usbus4]
100052                   D       -        0xc790dddc [usbus3]
100051                   D       -        0xc790ddac [usbus3]
100050                   D       -        0xc790dd7c [usbus3]
100049                   D       -        0xc790dd4c [usbus3]
100048                   D       -        0xc790dd1c [usbus3]
100046                   D       -        0xc78f4ddc [usbus2]
100045                   D       -        0xc78f4dac [usbus2]
100044                   D       -        0xc78f4d7c [usbus2]
100043                   D       -        0xc78f4d4c [usbus2]
100042                   D       -        0xc78f4d1c [usbus2]
100040                   D       -        0xc78d4ddc [usbus1]
100039                   D       -        0xc78d4dac [usbus1]
100038                   D       -        0xc78d4d7c [usbus1]
100037                   D       -        0xc78d4d4c [usbus1]
100036                   D       -        0xc78d4d1c [usbus1]
100034                   D       -        0xc7853ddc [usbus0]
100033                   D       -        0xc7853dac [usbus0]
100032                   D       -        0xc7853d7c [usbus0]
100031                   D       -        0xc7853d4c [usbus0]
100030                   D       -        0xc7853d1c [usbus0]
    4     0     0     0  DL      (threaded)          [cam]
100070                   D       -        0xc1e9b7ac [scanner]
100016                   D       -        0xc1e9b900 [doneq0]
   15     0     0     0  RL                          [rand_harvestq]
    3     0     0     0  DL      crypto_r 0xc1f83528 [crypto returns]
    2     0     0     0  DL      crypto_w 0xc1f83468 [crypto]
   14     0     0     0  DL      (threaded)          [geom]
100010                   D       -        0xc1fdaf30 [g_down]
100009                   D       -        0xc1fdaf2c [g_up]
100008                   D       -        0xc1fdaf28 [g_event]
   13     0     0     0  DL      sleep    0xc1e72e74 [ng_queue0]
   12     0     0     0  WL      (threaded)          [intr]
100068</st1000lm024></st1000lm024></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></crypto></pnp0c01></pnp0c01></generic></system></isa></parallel></printer></parallel></standard></pnp0c01></pnp0c01></at></keyboard></at></at></serial></ata></ata></intel></isa></pci-isa></encrypt></marvell></mii></marvell></marvell></marvell></mii></marvell></marvell></marvell></mii></marvell></marvell></marvell></mii></marvell></marvell></pci></mptable></intel></intel></intel></intel></intel></marvell></mii></marvell></marvell></pci></mptable></marvell></mii></marvell></marvell></pci></mptable></marvell></mii></marvell></marvell></pci></mptable></marvell></mii></marvell></marvell></pci></mptable></intel></vga-compatible></pci></mptable></software></memory>_</crypto></null></version></software,></software,></oem00000></fpu,vme,de,pse,tsc,msr,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,clflush,dts,acpi,mmx,fxsr,sse,sse2,tm,pbe> 
```_&_
]]>https://forum.netgate.com/topic/115339/watchguard-x750e-pfsense-2-3-4-not-supported-solvedRSS for NodeWed, 15 Apr 2026 19:31:26 GMTMon, 08 May 2017 07:24:43 GMT60<![CDATA[Reply to Watchguard x750e pfsense 2.3.4 not supported(SOLVED) on Tue, 09 May 2017 06:55:27 GMT]]>Hello 2 all.
Really its a magic…

For a few days after this trouble, i download the same image and make clean install again...

All working fine without any errors. I am stuck.
But problem is solved.

]]>https://forum.netgate.com/post/698346https://forum.netgate.com/post/698346Tue, 09 May 2017 06:55:27 GMT<![CDATA[Reply to Watchguard x750e pfsense 2.3.4 not supported(SOLVED) on Mon, 08 May 2017 08:19:23 GMT]]>Hmmm..

that is last part of my log

mode = 0100666, inum = 8507143, fs = /
panic: ffs_valloc: dup alloc
cpuid = 0
KDB: enter: panic
[ thread pid 312 tid 100088 ]
Stopped at      kdb_enter+0x3d: movl    $0,kdb_why
db:0:kdb.enter.default> textdump set
textdump set
db:0:kdb.enter.default>  capture on
db:0:kdb.enter.default>  run lockinfo
db:1:lockinfo> show locks
No such command
db:1:locks>  show alllocks
No such command
db:1:alllocks>  show lockedvnods
Locked vnodes

0xc801911c: tag ufs, type VDIR
    usecount 1, writecount 0, refcount 3 mountedhere 0
    flags (VI_ACTIVE)
    v_object 0xc7dff6b4 ref 0 pages 1 cleanbuf 0 dirtybuf 1
    lock type ufs: EXCL by thread 0xc7de4320 (pid 312, php-fpm, tid 100088)
        ino 8507136, on dev ufsid/59100aebef9b520c

0xc806a354: tag ufs, type VREG
    usecount 1, writecount 0, refcount 1 mountedhere 0
    flags (VI_ACTIVE)
    lock type ufs: EXCL by thread 0xc7de4320 (pid 312, php-fpm, tid 100088)
        ino 8507143, on dev ufsid/59100aebef9b520c
db:0:kdb.enter.default>  show pcpu
cpuid        = 0
dynamic pcpu = 0x58c700
curthread    = 0xc7de4320: pid 312 "php-fpm"
curpcb       = 0xeba8cd40
fpcurthread  = 0xc7de4320: pid 312 "php-fpm"
idlethread   = 0xc7713000: tid 100003 "idle: cpu0"
APIC ID      = 0
currentldt   = 0x50
db:0:kdb.enter.default>  bt
Tracing pid 312 tid 100088 td 0xc7de4320
kdb_enter(c145f716,c145f716,c1492c3b,eba8c7b4,0,...) at kdb_enter+0x3d/frame 0xeba8c760
vpanic(c1492c3b,eba8c7b4,eba8c7b4,eba8c830,c0fe6ef1,...) at vpanic+0x13b/frame 0xeba8c794
panic(c1492c3b,81b6,81cf07,c7dc80d4,81a4,...) at panic+0x1b/frame 0xeba8c7a8
ffs_valloc(c801911c,81a4,c7dc1e80,eba8c874,0,...) at ffs_valloc+0x961/frame 0xeba8c830
ufs_makeinode(eba8cb88,eba8cb9c,c801911c,eba8cb40,eba8ca00,...) at ufs_makeinode+0x73/frame 0xeba8c9b0
ufs_create(eba8caa8,0,0,c1e982b0,c801911c,...) at ufs_create+0x30/frame 0xeba8c9d4
VOP_CREATE_APV(c1e82d80,eba8caa8,2,c79d89fc,1c,...) at VOP_CREATE_APV+0x95/frame 0xeba8ca00
vn_open_cred(eba8cb40,eba8cbcc,1a4,0,c7dc1e80,c7deb428) at vn_open_cred+0x2ae/frame 0xeba8cad0
vn_open(eba8cb40,eba8cbcc,1a4,c7deb428,28c35e04,...) at vn_open+0x3d/frame 0xeba8caf8
kern_openat(c7de4320,ffffff9c,28c35e04,0,601,1b6) at kern_openat+0x310/frame 0xeba8cbf0
sys_openat(c7de4320,eba8cca8,c8038308,c1f67580,18,...) at sys_openat+0x3a/frame 0xeba8cc18
syscall(eba8cce8) at syscall+0x5c9/frame 0xeba8ccdc
Xint0x80_syscall() at Xint0x80_syscall+0x2f/frame 0xeba8ccdc
--- syscall (499, FreeBSD ELF32, sys_openat), eip = 0x28730093, esp = 0xbfbfa370, ebp = 0xbfbfa394 ---
db:0:kdb.enter.default>  ps
  pid  ppid  pgrp   uid   state   wmesg     wchan    cmd
  313    21    21     0  S+      sbwait   0xc806e408 fcgicli
  312   311   311     0  R       CPU 0               php-fpm
  311     1   311     0  Ss      kqread   0xc802f900 php-fpm
   55     0     0     0  DL      mdwait   0xc7d82800 [md0]
   21     1    21     0  Ss+     pause    0xc7d9597c sh
   20     0     0     0  DL      vlruwt   0xc7d95c20 [vnlru]
   19     0     0     0  DL      syncer   0xc1f7a6c4 [syncer]
   18     0     0     0  RL      (threaded)          [bufdaemon]
100082                   RunQ                        [/ worker]
100075                   D       psleep   0xc1f79e04 [bufdaemon]
   17     0     0     0  DL      pgzero   0xc1f848a8 [pagezero]
    9     0     0     0  DL      pollid   0xc1f59eb0 [idlepoll]
    8     0     0     0  DL      psleep   0xc1f845c4 [vmdaemon]
    7     0     0     0  DL      (threaded)          [pagedaemon]
100078                   D       umarcl   0xc1f841a4 [uma]
100071                   D       psleep   0xc1fe5504 [pagedaemon]
    6     0     0     0  DL      waiting_ 0xc1fdfe74 [sctp_iterator]
    5     0     0     0  DL      pftm     0xc0f7b2b0 [pf purge]
   16     0     0     0  DL      (threaded)          [usb]
100057                   D       -        0xc7923d64 [usbus4]
100056                   D       -        0xc7923d34 [usbus4]
100055                   D       -        0xc7923d04 [usbus4]
100054                   D       -        0xc7923cd4 [usbus4]
100053                   D       -        0xc7923ca4 [usbus4]
100052                   D       -        0xc790dddc [usbus3]
100051                   D       -        0xc790ddac [usbus3]
100050                   D       -        0xc790dd7c [usbus3]
100049                   D       -        0xc790dd4c [usbus3]
100048                   D       -        0xc790dd1c [usbus3]
100046                   D       -        0xc78f4ddc [usbus2]
100045                   D       -        0xc78f4dac [usbus2]
100044                   D       -        0xc78f4d7c [usbus2]
100043                   D       -        0xc78f4d4c [usbus2]
100042                   D       -        0xc78f4d1c [usbus2]
100040                   D       -        0xc78d4ddc [usbus1]
100039                   D       -        0xc78d4dac [usbus1]
100038                   D       -        0xc78d4d7c [usbus1]
100037                   D       -        0xc78d4d4c [usbus1]
100036                   D       -        0xc78d4d1c [usbus1]
100034                   D       -        0xc7853ddc [usbus0]
100033                   D       -        0xc7853dac [usbus0]
100032                   D       -        0xc7853d7c [usbus0]
100031                   D       -        0xc7853d4c [usbus0]
100030                   D       -        0xc7853d1c [usbus0]
    4     0     0     0  DL      (threaded)          [cam]
100070                   D       -        0xc1e9b7ac [scanner]
100016                   D       -        0xc1e9b900 [doneq0]
   15     0     0     0  RL                          [rand_harvestq]
    3     0     0     0  DL      crypto_r 0xc1f83528 [crypto returns]
    2     0     0     0  DL      crypto_w 0xc1f83468 [crypto]
   14     0     0     0  DL      (threaded)          [geom]
100010                   D       -        0xc1fdaf30 [g_down]
100009                   D       -        0xc1fdaf2c [g_up]
100008                   D       -        0xc1fdaf28 [g_event]
   13     0     0     0  DL      sleep    0xc1e72e74 [ng_queue0]
   12     0     0     0  WL      (threaded)          [intr]
100068                   I                           [swi1: pfsync]
100066                   I                           [swi1: pf send]
100063                   I                           [irq7: ppc0]
100062                   I                           [swi0: uart uart]
100061                   I                           [irq1: atkbd0]
100060                   I                           [irq15: ata1]
100059                   I                           [irq14: ata0]
100058                   I                           [irq17: skc1]
100047                   I                           [irq16: skc0 uhci3]
100041                   I                           [irq18: skc2 uhci2]
100035                   I                           [irq19: skc3 uhci1]
100029                   I                           [irq23: uhci0 ehci0]
100028                   I                           [irq259: mskc3]
100027                   I                           [irq258: mskc2]
100026                   I                           [irq257: mskc1]
100025                   I                           [irq256: mskc0]
100023                   I                           [swi6: Giant taskq]
100021                   I                           [swi6: task queue]
100015                   I                           [swi5: fast taskq]
100006                   I                           [swi4: clock]
100005                   I                           [swi1: netisr 0]
100004                   I                           [swi3: vm]
   11     0     0     0  RL                          [idle: cpu0]
    1     0     1     0  SLs     wait     0xc770c308 [init]
   10     0     0     0  DL      audit_wo 0xc1fe3ddc [audit]
    0     0     0     0  DLs     (threaded)          [kernel]
100069                   D       -        0xc770e280 [CAM taskq]
100064                   D       -        0xc796e580 [mca taskq]
100024                   D       -        0xc75c5b00 [thread]
100022                   D       -        0xc75c5c80 [ffs_trim taskq]
100020                   D       -        0xc75c5e00 [acpi_task_2]
100019                   D       -        0xc75c5e00 [acpi_task_1]
100018                   D       -        0xc75c5e00 [acpi_task_0]
100017                   D       -        0xc770e000 [kqueue taskq]
100011                   D       -        0xc770f700 [firmware taskq]
100000                   D       swapin   0xc1fdafb4 [swapper]
db:0:kdb.enter.default>  alltrace

Tracing command fcgicli pid 313 tid 100083 td 0xc7de5320
sched_switch(c7de5320,0,104,ac,98,...) at sched_switch+0x2d2/frame 0xeba7a970
mi_switch(104,0,eba7aa20,c0cda762,c1f67580,c7de5320) at mi_switch+0x122/frame 0xeba7a9a8
sleepq_switch(c7de5320,0,c1463cfa,1a8,0,...) at sleepq_switch+0x15b/frame 0xeba7a9d0
sleepq_catch_signals(0,c1463cfa,154,1,c7de5320,...) at sleepq_catch_signals+0x5be/frame 0xeba7aa24
sleepq_wait_sig(c806e408,68,c14679a7,100,0,...) at sleepq_wait_sig+0x14/frame 0xeba7aa50
_sleep(c806e408,c806e3c8,168,c14679a7,0,0,0,0,0) at _sleep+0x29b/frame 0xeba7aa98
sbwait(c806e3a4,1,0,0,78,...) at sbwait+0x71/frame 0xeba7aacc
soreceive_generic(c806e350,eba7ab80,eba7ab88,0,0,...) at soreceive_generic+0x273/frame 0xeba7ab38
kern_recvit(c7de5320,3,eba7abe8,0,0,...) at kern_recvit+0x1ea/frame 0xeba7abc0
sys_recvfrom(c7de5320,eba7aca8,c7d95000,c7de5320,c7de4320,...) at sys_recvfrom+0xa5/frame 0xeba7ac18
syscall(eba7ace8) at syscall+0x5c9/frame 0xeba7acdc
Xint0x80_syscall() at Xint0x80_syscall+0x2f/frame 0xeba7acdc
--- syscall (29, FreeBSD ELF32, sys_recvfrom), eip = 0x281407cb, esp = 0xbfbfe694, ebp = 0xbfbfe6b4 ---

Tracing command php-fpm pid 312 tid 100088 td 0xc7de4320
kdb_enter(c145f716,c145f716,c1492c3b,eba8c7b4,0,...) at kdb_enter+0x3d/frame 0xeba8c760
vpanic(c1492c3b,eba8c7b4,eba8c7b4,eba8c830,c0fe6ef1,...) at vpanic+0x13b/frame 0xeba8c794
panic(c1492c3b,81b6,81cf07,c7dc80d4,81a4,...) at panic+0x1b/frame 0xeba8c7a8
ffs_valloc(c801911c,81a4,c7dc1e80,eba8c874,0,...) at ffs_valloc+0x961/frame 0xeba8c830
ufs_makeinode(eba8cb88,eba8cb9c,c801911c,eba8cb40,eba8ca00,...) at ufs_makeinode+0x73/frame 0xeba8c9b0
ufs_create(eba8caa8,0,0,c1e982b0,c801911c,...) at ufs_create+0x30/frame 0xeba8c9d4
VOP_CREATE_APV(c1e82d80,eba8caa8,2,c79d89fc,1c,...) at VOP_CREATE_APV+0x95/frame 0xeba8ca00
vn_open_cred(eba8cb40,eba8cbcc,1a4,0,c7dc1e80,c7deb428) at vn_open_cred+0x2ae/frame 0xeba8cad0
vn_open(eba8cb40,eba8cbcc,1a4,c7deb428,28c35e04,...) at vn_open+0x3d/frame 0xeba8caf8
kern_openat(c7de4320,ffffff9c,28c35e04,0,601,1b6) at kern_openat+0x310/frame 0xeba8cbf0
sys_openat(c7de4320,eba8cca8,c8038308,c1f67580,18,...) at sys_openat+0x3a/frame 0xeba8cc18
syscall(eba8cce8) at syscall+0x5c9/frame 0xeba8ccdc
Xint0x80_syscall() at Xint0x80_syscall+0x2f/frame 0xeba8ccdc
--- syscall (499, FreeBSD ELF32, sys_openat), eip = 0x28730093, esp = 0xbfbfa370, ebp = 0xbfbfa394 ---

Tracing command php-fpm pid 311 tid 100091 td 0xc7d05960
sched_switch(c7d05960,0,104,1,e101e1b8,...) at sched_switch+0x2d2/frame 0xeba958e4
mi_switch(104,0,19,10000000,0,c7d05960) at mi_switch+0x122/frame 0xeba9591c
sleepq_switch(c7d05960,0,c1463cfa,1a8,0,...) at sleepq_switch+0x15b/frame 0xeba95944
sleepq_catch_signals(10000000,0,c0d45bc0,c7d05960,0,...) at sleepq_catch_signals+0x5be/frame 0xeba95998
sleepq_timedwait_sig(c802f900,68,19,10000000,0,...) at sleepq_timedwait_sig+0x14/frame 0xeba959c8
_sleep(c802f900,c802f900,168,c1459e00,35667824,...) at _sleep+0x26b/frame 0xeba95a10
kern_kevent_fp(c7d05960,c7deb658,0,1,eba95be8,...) at kern_kevent_fp+0x3bc/frame 0xeba95b48
kern_kevent(c7d05960,e,0,1,eba95be8,...) at kern_kevent+0xdf/frame 0xeba95b98
sys_kevent(c7d05960,eba95ca8,c8037918,c7d05960,c7de5320,...) at sys_kevent+0x131/frame 0xeba95c18
syscall(eba95ce8) at syscall+0x5c9/frame 0xeba95cdc
Xint0x80_syscall() at Xint0x80_syscall+0x2f/frame 0xeba95cdc
--- syscall (363, FreeBSD ELF32, sys_kevent), eip = 0x2873a7db, esp = 0xbfbfca6c, ebp = 0xbfbfca98 ---

Tracing command md0 pid 55 tid 100085 td 0xc7de4c80
sched_switch(c7de4c80,0,104,eba82bb0,0,...) at sched_switch+0x2d2/frame 0xeba82b88
mi_switch(104,0,e258bf40,c7d86280,c7de4c80,c7d82800) at mi_switch+0x122/frame 0xeba82bc0
sleepq_switch(c7de4c80,0,c1463cfa,269,c7dc1758,...) at sleepq_switch+0x15b/frame 0xeba82be8
sleepq_wait(c7d82800,5c,c13e7b79,0,0,...) at sleepq_wait+0x3f/frame 0xeba82c14
_sleep(c7d82800,c7d82820,25c,c13e7b79,0,...) at _sleep+0x2ae/frame 0xeba82c5c
md_kthread(c7d82800,eba82ce8,1002,ffffffff,0,...) at md_kthread+0xd7/frame 0xeba82ca4
fork_exit(c086b050,c7d82800,eba82ce8) at fork_exit+0xa3/frame 0xeba82cd4
fork_trampoline() at fork_trampoline+0x8/frame 0xeba82cd4
--- trap 0, eip = 0, esp = 0xeba82d20, ebp = 0 ---

Tracing command sh pid 21 tid 100079 td 0xc7de6000
sched_switch(c7de6000,0,104,ac,98,...) at sched_switch+0x2d2/frame 0xeba6ca7c
mi_switch(104,0,c7de6000,eba6cb2c,c0cda762,c7de6000) at mi_switch+0x122/frame 0xeba6cab4
sleepq_switch(c7de6000,0,c1463cfa,1a8,0,...) at sleepq_switch+0x15b/frame 0xeba6cadc
sleepq_catch_signals(0,c1463cfa,154,c7de6000,eba6cba4,...) at sleepq_catch_signals+0x5be/frame 0xeba6cb30
sleepq_wait_sig(c7d9597c,74,c13fe0e5,100,0,...) at sleepq_wait_sig+0x14/frame 0xeba6cb5c
_sleep(c7d9597c,c7d959b0,174,c13fe0e5,0,...) at _sleep+0x29b/frame 0xeba6cba4
kern_sigsuspend(c7de6000,0,0,0,0,...) at kern_sigsuspend+0x137/frame 0xeba6cbe8
sys_sigsuspend(c7de6000,eba6cca8,fffffed8,0,0,...) at sys_sigsuspend+0x58/frame 0xeba6cc18
syscall(eba6cce8) at syscall+0x5c9/frame 0xeba6ccdc
Xint0x80_syscall() at Xint0x80_syscall+0x2f/frame 0xeba6ccdc
--- syscall (4, FreeBSD ELF32, sys_write), eip = 0x281ad003, esp = 0xbfbfec0c, ebp = 0xbfbfec98 ---

Tracing command vnlru pid 20 tid 100077 td 0xc7d03320
sched_switch(c7d03320,0,104,0,c1fdc4a4,...) at sched_switch+0x2d2/frame 0xeba65b5c
mi_switch(104,0,101,c7d03320,eba65be8,c7d95c20) at mi_switch+0x122/frame 0xeba65b94
sleepq_switch(c7d03320,0,c1463cfa,28c,101,...) at sleepq_switch+0x15b/frame 0xeba65bbc
sleepq_timedwait(c7d95c20,60,0,0,0,...) at sleepq_timedwait+0x3f/frame 0xeba65be8
_sleep(c7d95c20,c1f7a67c,260,c146b058,fffffed8,...) at _sleep+0x282/frame 0xeba65c30
vnlru_proc(0,eba65ce8,0,0,0,...) at vnlru_proc+0xcf/frame 0xeba65ca4
fork_exit(c0dae580,0,eba65ce8) at fork_exit+0xa3/frame 0xeba65cd4
fork_trampoline() at fork_trampoline+0x8/frame 0xeba65cd4
--- trap 0, eip = 0, esp = 0xeba65d20, ebp = 0 ---

Tracing command syncer pid 19 tid 100076 td 0xc7d03640
sched_switch(c7d03640,0,104,c1fdc4a4,0,...) at sched_switch+0x2d2/frame 0xeba62b68
mi_switch(104,0,101,c7d03640,eba62bf4,c1f7a6c4) at mi_switch+0x122/frame 0xeba62ba0
sleepq_switch(c7d03640,0,c1463cfa,28c,101,...) at sleepq_switch+0x15b/frame 0xeba62bc8
sleepq_timedwait(c1f7a6c4,0,0,0,0,...) at sleepq_timedwait+0x3f/frame 0xeba62bf4
_cv_timedwait_sbt(c1f7a6c4,c1f7a6a4,fffffed8,0,0,...) at _cv_timedwait_sbt+0x1b7/frame 0xeba62c28
sched_sync(0,eba62ce8,0,0,0,...) at sched_sync+0x7a1/frame 0xeba62ca4
fork_exit(c0dadc40,0,eba62ce8) at fork_exit+0xa3/frame 0xeba62cd4
fork_trampoline() at fork_trampoline+0x8/frame 0xeba62cd4
--- trap 0, eip = 0, esp = 0xeba62d20, ebp = 0 ---

Tracing command bufdaemon pid 18 tid 100082 td 0xc7de5640
sched_switch(c7de5640,0,104,c1fdc4a4,0,...) at sched_switch+0x2d2/frame 0xeba77b90
mi_switch(104,0,101,c7de5640,eba77c1c,c7e07c84) at mi_switch+0x122/frame 0xeba77bc8
sleepq_switch(c7de5640,0,c1463cfa,28c,101,...) at sleepq_switch+0x15b/frame 0xeba77bf0
sleepq_timedwait(c7e07c84,54,0,0,0,...) at sleepq_timedwait+0x3f/frame 0xeba77c1c
_sleep(c7e07c84,c7e07c00,54,c1495e96,7fffff6c,...) at _sleep+0x282/frame 0xeba77c64
softdep_flush(c7dbbd20,eba77ce8,c0ffe030,0,eba77cd0,...) at softdep_flush+0x1fa/frame 0xeba77ca4
fork_exit(c0ffe030,c7dbbd20,eba77ce8) at fork_exit+0xa3/frame 0xeba77cd4
fork_trampoline() at fork_trampoline+0x8/frame 0xeba77cd4
--- trap 0, eip = 0, esp = 0xeba77d20, ebp = 0 ---

Tracing command bufdaemon pid 18 tid 100075 td 0xc7d03960
sched_switch(c7d03960,0,104,c1fdc4a4,0,...) at sched_switch+0x2d2/frame 0xeba5fb98
mi_switch(104,0,101,c7d03960,eba5fc24,c1f79e04) at mi_switch+0x122/frame 0xeba5fbd0
sleepq_switch(c7d03960,0,c1463cfa,28c,101,...) at sleepq_switch+0x15b/frame 0xeba5fbf8
sleepq_timedwait(c1f79e04,54,0,0,0,...) at sleepq_timedwait+0x3f/frame 0xeba5fc24
_sleep(c1f79e04,c1f79d80,54,c14689fd,fffffed8,...) at _sleep+0x282/frame 0xeba5fc6c
buf_daemon(0,eba5fce8,0,0,0,...) at buf_daemon+0xac/frame 0xeba5fca4
fork_exit(c0d917c0,0,eba5fce8) at fork_exit+0xa3/frame 0xeba5fcd4
fork_trampoline() at fork_trampoline+0x8/frame 0xeba5fcd4
--- trap 0, eip = 0, esp = 0xeba5fd20, ebp = 0 ---

Tracing command pagezero pid 17 tid 100074 td 0xc7d03c80
sched_switch(c7d03c80,0,104,c1fdc4a4,0,...) at sched_switch+0x2d2/frame 0xeba5cba0
mi_switch(104,0,101,c7d03c80,eba5cc2c,c1f848a8) at mi_switch+0x122/frame 0xeba5cbd8
sleepq_switch(c7d03c80,0,c1463cfa,28c,101,...) at sleepq_switch+0x15b/frame 0xeba5cc00
sleepq_timedwait(c1f848a8,0,12b,0,0,...) at sleepq_timedwait+0x3f/frame 0xeba5cc2c
_sleep(c1f848a8,c1fe5480,0,c149a352,fffea520,...) at _sleep+0x282/frame 0xeba5cc74
vm_pagezero(0,eba5cce8,0,0,0,...) at vm_pagezero+0xd2/frame 0xeba5cca4
fork_exit(c1061320,0,eba5cce8) at fork_exit+0xa3/frame 0xeba5ccd4
fork_trampoline() at fork_trampoline+0x8/frame 0xeba5ccd4
--- trap 0, eip = 0, esp = 0xeba5cd20, ebp = 0 ---

Tracing command idlepoll pid 9 tid 100073 td 0xc7d04000
sched_switch(c7d04000,0,104,0,c1fdc4a4,...) at sched_switch+0x2d2/frame 0xeba59b8c
mi_switch(104,0,101,c7d04000,eba59c18,c1f59eb0) at mi_switch+0x122/frame 0xeba59bc4
sleepq_switch(c7d04000,0,c1463cfa,28c,101,...) at sleepq_switch+0x15b/frame 0xeba59bec
sleepq_timedwait(c1f59eb0,0,2,0,0,...) at sleepq_timedwait+0x3f/frame 0xeba59c18
_sleep(c1f59eb0,0,0,c145dffd,fffffc88,...) at _sleep+0x282/frame 0xeba59c60
poll_idle(0,eba59ce8,0,0,0,...) at poll_idle+0x125/frame 0xeba59ca4
fork_exit(c0cde450,0,eba59ce8) at fork_exit+0xa3/frame 0xeba59cd4
fork_trampoline() at fork_trampoline+0x8/frame 0xeba59cd4
--- trap 0, eip = 0, esp = 0xeba59d20, ebp = 0 ---

Tracing command vmdaemon pid 8 tid 100072 td 0xc7d04320
sched_switch(c7d04320,0,104,0,0,...) at sched_switch+0x2d2/frame 0xeba56b54
mi_switch(104,0,0,0,c7d04320,c1f845c4) at mi_switch+0x122/frame 0xeba56b8c
sleepq_switch(c7d04320,0,c1463cfa,269,0,...) at sleepq_switch+0x15b/frame 0xeba56bb4
sleepq_wait(c1f845c4,74,c14689fd,0,0,...) at sleepq_wait+0x3f/frame 0xeba56be0
_sleep(c1f845c4,c1f845ac,74,c14689fd,0,...) at _sleep+0x2ae/frame 0xeba56c28
vm_daemon(0,eba56ce8,0,0,0,...) at vm_daemon+0x130/frame 0xeba56ca4
fork_exit(c1059390,0,eba56ce8) at fork_exit+0xa3/frame 0xeba56cd4
fork_trampoline() at fork_trampoline+0x8/frame 0xeba56cd4
--- trap 0, eip = 0, esp = 0xeba56d20, ebp = 0 ---

Tracing command pagedaemon pid 7 tid 100078 td 0xc7d03000
sched_switch(c7d03000,0,104,0,0,...) at sched_switch+0x2d2/frame 0xeba68ba4
mi_switch(104,0,0,0,c7d03000,c1f841a4) at mi_switch+0x122/frame 0xeba68bdc
sleepq_switch(c7d03000,0,c1463cfa,269,0,...) at sleepq_switch+0x15b/frame 0xeba68c04
sleepq_wait(c1f841a4,54,c149802f,0,0,...) at sleepq_wait+0x3f/frame 0xeba68c30
_sleep(c1f841a4,c1f84190,54,c149802f,0,...) at _sleep+0x2ae/frame 0xeba68c78
uma_reclaim_worker(0,eba68ce8,0,0,0,...) at uma_reclaim_worker+0xb0/frame 0xeba68ca4
fork_exit(c103ad00,0,eba68ce8) at fork_exit+0xa3/frame 0xeba68cd4
fork_trampoline() at fork_trampoline+0x8/frame 0xeba68cd4
--- trap 0, eip = 0, esp = 0xeba68d20, ebp = 0 ---

Tracing command pagedaemon pid 7 tid 100071 td 0xc7d04640
sched_switch(c7d04640,0,104,c1fdc4a4,0,...) at sched_switch+0x2d2/frame 0xeba53b60
mi_switch(104,0,101,c7d04640,eba53bec,c1fe5504) at mi_switch+0x122/frame 0xeba53b98
sleepq_switch(c7d04640,0,c1463cfa,28c,101,...) at sleepq_switch+0x15b/frame 0xeba53bc0
sleepq_timedwait(c1fe5504,54,0,0,0,...) at sleepq_timedwait+0x3f/frame 0xeba53bec
_sleep(c1fe5504,c1fe5480,54,c14689fd,fffffed8,...) at _sleep+0x282/frame 0xeba53c34
vm_pageout(0,eba53ce8,0,0,0,...) at vm_pageout+0x23b/frame 0xeba53ca4
fork_exit(c105a130,0,eba53ce8) at fork_exit+0xa3/frame 0xeba53cd4
fork_trampoline() at fork_trampoline+0x8/frame 0xeba53cd4
--- trap 0, eip = 0, esp = 0xeba53d20, ebp = 0 ---

Tracing command sctp_iterator pid 6 tid 100067 td 0xc7d05320
sched_switch(c7d05320,0,104,0,0,...) at sched_switch+0x2d2/frame 0xeba47ba4
mi_switch(104,0,0,0,c7d05320,c1fdfe74) at mi_switch+0x122/frame 0xeba47bdc
sleepq_switch(c7d05320,0,c1463cfa,269,0,...) at sleepq_switch+0x15b/frame 0xeba47c04
sleepq_wait(c1fdfe74,0,c147f1ab,0,0,...) at sleepq_wait+0x3f/frame 0xeba47c30
_sleep(c1fdfe74,c1fdfe3c,0,c147f1ab,0,...) at _sleep+0x2ae/frame 0xeba47c78
sctp_iterator_thread(0,eba47ce8,0,0,0,...) at sctp_iterator_thread+0x9c/frame 0xeba47ca4
fork_exit(c0e8eee0,0,eba47ce8) at fork_exit+0xa3/frame 0xeba47cd4
fork_trampoline() at fork_trampoline+0x8/frame 0xeba47cd4
--- trap 0, eip = 0, esp = 0xeba47d20, ebp = 0 ---

Tracing command pf purge pid 5 tid 100065 td 0xc78e7640
sched_switch(c78e7640,0,104,c1fdc4a4,0,...) at sched_switch+0x2d2/frame 0xeba40b98
mi_switch(104,0,101,c78e7640,eba40c24,c0f7b2b0) at mi_switch+0x122/frame 0xeba40bd0
sleepq_switch(c78e7640,0,c1463cfa,28c,101,...) at sleepq_switch+0x15b/frame 0xeba40bf8
sleepq_timedwait(c0f7b2b0,0,0,0,0,...) at sleepq_timedwait+0x3f/frame 0xeba40c24
_sleep(c0f7b2b0,c1fe2df4,0,c148b207,1999997c,...) at _sleep+0x282/frame 0xeba40c6c
pf_purge_thread(0,eba40ce8,0,0,0,...) at pf_purge_thread+0xba/frame 0xeba40ca4
fork_exit(c0f7b2b0,0,eba40ce8) at fork_exit+0xa3/frame 0xeba40cd4
fork_trampoline() at fork_trampoline+0x8/frame 0xeba40cd4
--- trap 0, eip = 0, esp = 0xeba40d20, ebp = 0 ---

Tracing command usb pid 16 tid 100057 td 0xc793f000
sched_switch(c793f000,0,104,0,0,...) at sched_switch+0x2d2/frame 0xeb9f4bb8
mi_switch(104,0,0,0,c793f000,c7923d64) at mi_switch+0x122/frame 0xeb9f4bf0
sleepq_switch(c793f000,0,c1463cfa,269,0,...) at sleepq_switch+0x15b/frame 0xeb9f4c18
sleepq_wait(c7923d64,0,c144aff8,1,0,...) at sleepq_wait+0x3f/frame 0xeb9f4c44
_cv_wait(c7923d64,c7923ed0,c142c211,73,0,...) at _cv_wait+0x192/frame 0xeb9f4c74
usb_process(c7923d5c,eb9f4ce8,0,0,0,...) at usb_process+0xf6/frame 0xeb9f4ca4
fork_exit(c0a97af0,c7923d5c,eb9f4ce8) at fork_exit+0xa3/frame 0xeb9f4cd4
fork_trampoline() at fork_trampoline+0x8/frame 0xeb9f4cd4
--- trap 0, eip = 0, esp = 0xeb9f4d20, ebp = 0 ---

Tracing command usb pid 16 tid 100056 td 0xc793f320
sched_switch(c793f320,0,104,40008,0,...) at sched_switch+0x2d2/frame 0xeb9f1bb8
mi_switch(104,0,c78b0fc8,c0d0208d,c793f320,c7923d34) at mi_switch+0x122/frame 0xeb9f1bf0
sleepq_switch(c793f320,0,c1463cfa,269,500,...) at sleepq_switch+0x15b/frame 0xeb9f1c18
sleepq_wait(c7923d34,0,c144aff8,1,0,...) at sleepq_wait+0x3f/frame 0xeb9f1c44
_cv_wait(c7923d34,c7923ed0,c142c211,73,0,...) at _cv_wait+0x192/frame 0xeb9f1c74
usb_process(c7923d2c,eb9f1ce8,0,0,0,...) at usb_process+0xf6/frame 0xeb9f1ca4
fork_exit(c0a97af0,c7923d2c,eb9f1ce8) at fork_exit+0xa3/frame 0xeb9f1cd4
fork_trampoline() at fork_trampoline+0x8/frame 0xeb9f1cd4
--- trap 0, eip = 0, esp = 0xeb9f1d20, ebp = 0 ---

Tracing command usb pid 16 tid 100055 td 0xc793f640
sched_switch(c793f640,0,104,0,0,...) at sched_switch+0x2d2/frame 0xeb9eebb8
mi_switch(104,0,0,0,c793f640,c7923d04) at mi_switch+0x122/frame 0xeb9eebf0
sleepq_switch(c793f640,0,c1463cfa,269,0,...) at sleepq_switch+0x15b/frame 0xeb9eec18
sleepq_wait(c7923d04,0,c144aff8,1,0,...) at sleepq_wait+0x3f/frame 0xeb9eec44
_cv_wait(c7923d04,c7923ed0,c142c211,73,0,...) at _cv_wait+0x192/frame 0xeb9eec74
usb_process(c7923cfc,eb9eece8,0,0,0,...) at usb_process+0xf6/frame 0xeb9eeca4
fork_exit(c0a97af0,c7923cfc,eb9eece8) at fork_exit+0xa3/frame 0xeb9eecd4
fork_trampoline() at fork_trampoline+0x8/frame 0xeb9eecd4
--- trap 0, eip = 0, esp = 0xeb9eed20, ebp = 0 ---

Tracing command usb pid 16 tid 100054 td 0xc793f960
sched_switch(c793f960,0,104,0,0,...) at sched_switch+0x2d2/frame 0xeb9ebbb8
mi_switch(104,0,0,0,c793f960,c7923cd4) at mi_switch+0x122/frame 0xeb9ebbf0
sleepq_switch(c793f960,0,c1463cfa,269,0,...) at sleepq_switch+0x15b/frame 0xeb9ebc18
sleepq_wait(c7923cd4,0,c144aff8,1,0,...) at sleepq_wait+0x3f/frame 0xeb9ebc44
_cv_wait(c7923cd4,c7923ed0,c142c211,73,0,...) at _cv_wait+0x192/frame 0xeb9ebc74
usb_process(c7923ccc,eb9ebce8,0,0,0,...) at usb_process+0xf6/frame 0xeb9ebca4
fork_exit(c0a97af0,c7923ccc,eb9ebce8) at fork_exit+0xa3/frame 0xeb9ebcd4
fork_trampoline() at fork_trampoline+0x8/frame 0xeb9ebcd4
--- trap 0, eip = 0, esp = 0xeb9ebd20, ebp = 0 ---

Tracing command usb pid 16 tid 100053 td 0xc793fc80
sched_switch(c793fc80,0,104,0,0,...) at sched_switch+0x2d2/frame 0xeb9e8bb8
mi_switch(104,0,0,0,c793fc80,c7923ca4) at mi_switch+0x122/frame 0xeb9e8bf0
sleepq_switch(c793fc80,0,c1463cfa,269,0,...) at sleepq_switch+0x15b/frame 0xeb9e8c18
sleepq_wait(c7923ca4,0,c144aff8,1,0,...) at sleepq_wait+0x3f/frame 0xeb9e8c44
_cv_wait(c7923ca4,c7923ed0,c142c211,73,0,...) at _cv_wait+0x192/frame 0xeb9e8c74
usb_process(c7923c9c,eb9e8ce8,0,0,0,...) at usb_process+0xf6/frame 0xeb9e8ca4
fork_exit(c0a97af0,c7923c9c,eb9e8ce8) at fork_exit+0xa3/frame 0xeb9e8cd4
fork_trampoline() at fork_trampoline+0x8/frame 0xeb9e8cd4
--- trap 0, eip = 0, esp = 0xeb9e8d20, ebp = 0 ---

Tracing command usb pid 16 tid 100052 td 0xc78abc80
sched_switch(c78abc80,0,104,0,0,...) at sched_switch+0x2d2/frame 0xeb9e3bb8
mi_switch(104,0,0,0,c78abc80,c790dddc) at mi_switch+0x122/frame 0xeb9e3bf0
sleepq_switch(c78abc80,0,c1463cfa,269,0,...) at sleepq_switch+0x15b/frame 0xeb9e3c18
sleepq_wait(c790dddc,0,c144aff8,1,0,...) at sleepq_wait+0x3f/frame 0xeb9e3c44
_cv_wait(c790dddc,c790df48,c142c211,73,0,...) at _cv_wait+0x192/frame 0xeb9e3c74
usb_process(c790ddd4,eb9e3ce8,0,0,0,...) at usb_process+0xf6/frame 0xeb9e3ca4
fork_exit(c0a97af0,c790ddd4,eb9e3ce8) at fork_exit+0xa3/frame 0xeb9e3cd4
fork_trampoline() at fork_trampoline+0x8/frame 0xeb9e3cd4
--- trap 0, eip = 0, esp = 0xeb9e3d20, ebp = 0 ---

Maybe it help to diagnose my problem? [/thread]
]]>https://forum.netgate.com/post/698038https://forum.netgate.com/post/698038Mon, 08 May 2017 08:19:23 GMT<![CDATA[Reply to Watchguard x750e pfsense 2.3.4 not supported(SOLVED) on Mon, 08 May 2017 08:14:55 GMT]]>2.3.4 is different to 2.4

2.3.4 should run on all the same hardware as 2.3.3_p1

So there is some other problem that you have.

]]>https://forum.netgate.com/post/698037https://forum.netgate.com/post/698037Mon, 08 May 2017 08:14:55 GMT<![CDATA[Reply to Watchguard x750e pfsense 2.3.4 not supported(SOLVED) on Mon, 08 May 2017 07:53:04 GMT]]>As i read on

https://doc.pfsense.org/index.php/2.4_New_Features_and_Changes

32-bit support has been deprecated and removed – There are no images available for 32-bit (x86/i386) Intel architecture systems

Yes, my device is x86 arch  only. So, as i understand it was my mistake…
The last release for x86 hardware is 2.3.3_1 isn't it?

For future(2)developers:
If my device doesn't support new version of pfsense - please disable a new versions in dashboard and check  compatibility before  start the update/installation.
Thanks

]]>https://forum.netgate.com/post/698034https://forum.netgate.com/post/698034Mon, 08 May 2017 07:53:04 GMT