<warning>– [ERRCODE: SC_ERR_INVALID_VALUE(130)] - Name of device should not be</warning>
-
The suricata log (services / suricata / logs view) shows a warning on all suricata enabled interfaces. This warning appears daily (processing of the updated rules)
Unfortunately, I cannot find the field I'm suppose to update e.g. not null
Here is the log:
23/5/2017 – 05:30:43 - <info>-- 2 rule files processed. 16362 rules successfully loaded, 34 rules failed
23/5/2017 -- 05:30:44 - <info>-- 16362 signatures processed. 296 are IP-only rules, 5673 are inspecting packet payload, 11726 inspect application layer, 102 are decoder event only
23/5/2017 -- 05:31:17 - <info>-- Threshold config parsed: 0 rule(s) found
23/5/2017 -- 05:31:17 - <info>-- fast output device (regular) initialized: alerts.log
23/5/2017 -- 05:31:17 - <info>-- http-log output device (regular) initialized: http.log
23/5/2017 -- 05:31:17 - <info>-- Using 1 live device(s).
23/5/2017 -- 05:31:17 - <warning>– [ERRCODE: SC_ERR_INVALID_VALUE(130)] - Name of device should not be null</warning>
23/5/2017 – 05:31:17 - <info>-- using interface igb3
23/5/2017 -- 05:31:17 - <info>-- Running in 'auto' checksum mode. Detection of interface state will require 1000 packets.
23/5/2017 -- 05:31:17 - <info>-- Found an MTU of 1500 for 'igb3'
23/5/2017 -- 05:31:17 - <info>-- Set snaplen to 1524 for 'igb3'
23/5/2017 -- 05:31:17 - <info>-- RunModeIdsPcapAutoFp initialised
23/5/2017 -- 05:31:17 - <notice>-- all 5 packet processing threads, 2 management threads initialized, engine started.
23/5/2017 -- 07:55:57 - <info>-- No packets with invalid checksum, assuming checksum offloading is NOT used</info></notice></info></info></info></info></info></info></info></info></info></info></info> -
This is a bug within the Suricata binary itself. It has been reported to Suricata upstream and will be fixed in the next release, I think. It is only a warning and will not affect operation.
Some changes were made to a section of code in the 3.2.x series, but one line got missed when those changes were made. You can find the bug report and details on the Suricata Redmine site.
Bill