<![CDATA[Want to assine my static ip on pfsense]]>dear all

i have an issue with my isp 
connectin to isp is pppoe  with username and password
i asked them for static ip
they provided  astatic ip  and gatway . but there is no option to use it in pfsense

please if any can help in this .

i want to use my static ip as my default ip to assige it for vpn and my own devices

regards
ahmed

]]>https://forum.netgate.com/topic/116272/want-to-assine-my-static-ip-on-pfsenseRSS for NodeSat, 16 May 2026 13:55:31 GMTMon, 29 May 2017 14:11:07 GMT60<![CDATA[Reply to Want to assine my static ip on pfsense on Tue, 30 May 2017 20:29:10 GMT]]>"IPv4 Address
196.219.129.21
Subnet mask IPv4
255.255.255.255
Gateway IPv4
10.45.10.37"

That is Just Borked!!!  So they gave you a static IP of public with a /32 mask and a gateway that is rfc1918 (10.x.x.x) ??

What sort of shit ISP is this??

is this your static you set??

41.39.34.86
Subnet mask IPv4
255.255.255.0
Gateway IPv4
41.39.34.1

They gave you a /24?? So your saying you can not ping 41.39.34.1?

Screenshots would be easier to read!

I would suggest you pull down your config you posted it has your pppoe password and user name in the clear.

Wow is this F'd UP!!!

traceroute to 41.39.34.1 (41.39.34.1), 30 hops max, 60 byte packets
1  192.168.9.253  2.327 ms  2.262 ms  2.215 ms
2  96.120.24.113  19.491 ms  18.426 ms  19.460 ms
3  162.151.90.117  19.435 ms  19.407 ms  19.396 ms
4  68.86.188.93  23.062 ms  21.120 ms  21.135 ms
5  68.86.91.165  23.019 ms * *
6  68.86.82.158  20.925 ms  17.297 ms  21.901 ms
7  199.229.229.249  26.168 ms  12.128 ms  20.069 ms
8  141.136.105.222  133.184 ms  133.131 ms  132.191 ms
9  46.33.84.102  156.814 ms 46.33.85.198  156.209 ms  154.668 ms
10 10.36.18.162  164.761 ms  165.683 ms  163.506 ms

Just F'ing wow!!!

traceroute to 196.219.129.21 (196.219.129.21), 30 hops max, 60 byte packets
1  192.168.9.253  1.188 ms  1.582 ms  1.850 ms
2  96.120.24.113  11.927 ms  17.753 ms  16.818 ms
3  162.151.90.117  17.714 ms  17.677 ms  17.652 ms
4  68.86.188.93  20.070 ms  20.040 ms  20.880 ms
5  68.86.91.165  19.968 ms *  19.905 ms
6  68.86.82.158  19.833 ms  18.904 ms  18.579 ms
7  199.229.229.249  17.112 ms  12.972 ms  13.492 ms
8  141.136.105.222  138.849 ms  138.461 ms  136.909 ms
9  46.33.84.102  164.928 ms  165.035 ms 46.33.85.198  154.796 ms
10  10.36.18.162  166.384 ms  166.052 ms  164.960 ms
11  * * *
12  * 10.36.18.114 166.756 ms *

You might want to contact your ISP that is just BORKED beyond belief!! 10.x.x.x is rfc1918 space!!

]]>https://forum.netgate.com/post/702860https://forum.netgate.com/post/702860Tue, 30 May 2017 20:29:10 GMT<![CDATA[Reply to Want to assine my static ip on pfsense on Tue, 30 May 2017 20:29:15 GMT]]>message removed

]]>https://forum.netgate.com/post/702858https://forum.netgate.com/post/702858Tue, 30 May 2017 20:29:15 GMT<![CDATA[Reply to Want to assine my static ip on pfsense on Tue, 30 May 2017 19:59:43 GMT]]>Status
up
PPPoE
up Disconnect
Uptime
00:07:40
MAC Address
00:00:00:00:00:00
IPv4 Address
196.219.129.21
Subnet mask IPv4
255.255.255.255
Gateway IPv4
10.45.10.37
IPv6 Link Local
fe80::21b:21ff:fe2a:8805%em0
DNS servers
127.0.0.1
163.121.128.134
163.121.128.135
8.8.8.8
8.8.4.4
MTU
1492
In/out packets
407921/284524 (529.98 MiB/16.65 MiB)
In/out packets (pass)
407921/284524 (529.98 MiB/16.65 MiB)
In/out packets (block)
243/1 (9 KiB/40 B)
In/out errors
0/0
Collisions
0
LAN Interface (lan, em1)
Status
up
MAC Address
b8:ac:6f:b1:10:a0
IPv4 Address
192.168.1.1
Subnet mask IPv4
255.255.255.0
IPv6 Link Local
fe80::1:1%em1
MTU
1500
Media
100baseTX <full-duplex>In/out packets
279577/404335 (17.00 MiB/531.44 MiB)
In/out packets (pass)
279577/404335 (17.00 MiB/531.44 MiB)
In/out packets (block)
100/108 (8 KiB/10 KiB)
In/out errors
0/0
Collisions
0
OPT1 Interface (opt1, em0)
Status
up
MAC Address
00:1b:21:2a:88:05
IPv4 Address
41.39.34.86
Subnet mask IPv4
255.255.255.0
Gateway IPv4
41.39.34.1
IPv6 Link Local
fe80::21b:21ff:fe2a:8805%em0
MTU
1500
Media
100baseTX <full-duplex>In/out packets
0/519 (0 B/15 KiB)
In/out packets (pass)
0/519 (0 B/15 KiB)
In/out packets (block)
0/0 (0 B/0 B)
In/out errors
0/0
Collisions
0</full-duplex></full-duplex>

]]>https://forum.netgate.com/post/702857https://forum.netgate.com/post/702857Tue, 30 May 2017 19:59:43 GMT<![CDATA[Reply to Want to assine my static ip on pfsense on Tue, 30 May 2017 19:37:43 GMT]]>So post up your config!

If you did what I post, then clearly there is a place to put in the static info.  If you put in that info and it does not work but you show the PPPoE link come up - then contact your ISP!

]]>https://forum.netgate.com/post/702848https://forum.netgate.com/post/702848Tue, 30 May 2017 19:37:43 GMT<![CDATA[Reply to Want to assine my static ip on pfsense on Tue, 30 May 2017 19:16:55 GMT]]>dear Mr. johnpoz
@ first i want to thank you for help .
i did already what you explained in your reply . but still iam not able to go online with my static ip .

if you can assist my  skype id:azzamadreianos

best regards
\ahmed

]]>https://forum.netgate.com/post/702842https://forum.netgate.com/post/702842Tue, 30 May 2017 19:16:55 GMT<![CDATA[Reply to Want to assine my static ip on pfsense on Mon, 29 May 2017 19:05:59 GMT]]>What part did my last post not give you the answer.. once you created the pppoe connection - did you assign that ppp connection to an actual interface you can work with??

assignpppoetoint.png
assignpppoetoint.png_thumb

]]>https://forum.netgate.com/post/702623https://forum.netgate.com/post/702623Mon, 29 May 2017 19:05:59 GMT<![CDATA[Reply to Want to assine my static ip on pfsense on Mon, 29 May 2017 15:36:42 GMT]]>dear johnpoz ,

please can you help me to do it . iam working and searching internet for it last two days but not working for all my trays . if ypu please can help .

regards
ahmed

]]>https://forum.netgate.com/post/702580https://forum.netgate.com/post/702580Mon, 29 May 2017 15:36:42 GMT<![CDATA[Reply to Want to assine my static ip on pfsense on Mon, 29 May 2017 14:38:17 GMT]]>Once you created your PPPoE connection in PPP under interface assignments.  Did you actually assign it to an OPT interface.. Once you do that - that is where you set it to be dhcp or static, etc.

]]>https://forum.netgate.com/post/702571https://forum.netgate.com/post/702571Mon, 29 May 2017 14:38:17 GMT