PPPOE with VLAN to LAN with VLAN
-
Hiya!
As of today, our ISP enforced the use of VLAN with their pppoe connection.
Now I added the VLAN to the pppoe and Internet works again, but our SIP connection won't.Here the basic layout:
- PFSense Running on VMWARE ESXI, WAN = VLAN 4095 (means PFSense tags the needed VLAN), LAN = VLAN 4095
- PPPoE Modem (WAN Port PFSENSE with VLAN 7, PPPOE connected)
- LAN Port:
Managed Switch with hybrid tagged/untagged. Every packet without VLAN 300 gets untagged with VLAN ID 1
-
Interface1 (LAN) without VLAN, Switch untagged to VLAN 1
-
Interface2 (VOICE) with VLAN 300, Switch tagged
I GUESS that the WAN connection tags the incoming packets with VLAN 7 and that's why the connection with/to the VLAN 300 won't work. The LAN Interface without VLAN works as it should, maybe because of the enforced tagging. So … any idea how to fix this?
Setting the Interface for LAN to VLAN 1 and change the switch to "tagged 1,300"? Can I remove the VLAN 7 from incoming pakets? Any other idea?
I already added VLAN 7 to tagged in the switch, even if it didn't make much sense ...
I'm honestly at a loss here
-
Hi Merad,
was you able to fix this problem?
i have the same problem, my provider need a vlan as source for PPPoe.
PPPOe is working when using it without vlan.
But also assigning an IP to ibg0_vlan144 is working.I am running PFsense 2.3.4p1 CE on APU2C4.
But it seems we are not the only one with this problem.
https://forum.pfsense.org/index.php?topic=118979.msg677260#msg677260any ideas?
best regards
Thomas -
Please make a picture of what ist what in your network. I don't know what you mean with "PPPoE Modem" and so on.
pfadmin