MULTI IPSEC CONNECTION / PFSENSE A - B - C
-
Hello all,
I have 4 different branches 4 different WAN 4 different IPSEC Configuration within PFSENSE.
But When I try to connect to Open VPN Client, I only see the network what I am connected to
What I mean ;
I connected with openvpn to PfsenseA but i only see PFsenseA - Lan Network ( cant see PfSense B - C -D Lan nets ) so , I want to see the all network "IP SEC Configurations" when I connect to the X PFSense via OpenVPN
is there any solution to this opinion?
Thanks so much.
-
No, what I mean,
I've already configured IPSec for 4 different branches and I've connected one to another.
,
But, I can ping only this network what I connected. I can not ping other PFSense Lan NetworksBUT!! PFSense's are configured already to other branches
Like :
PFSENSE A ;
IPSEC CONFIGURES
TO B
TO C
TO DPFSENSE B :
TO A
TO C
TO Detc.
-
You probably have to add the OpenVPN tunnel/remote networks as phase 2 networks on all the IPsec nodes so they know to send traffic for that network over the tunnel.
-
You probably have to add the OpenVPN tunnel/remote networks as phase 2 networks on all the IPsec nodes so they know to send traffic for that network over the tunnel.
unfortunately there is no option about IPSEC or OPENVPN LAN Network to add tunnels phase's.
here the picture : http://prntscr.com/g3czr1
Can you connect to my computer with team viewer if you have free time for me ?
-
So you add a Network type with the proper OpenVPN tunnel network to both sides.
-
So you add a Network type with the proper OpenVPN tunnel network to both sides.
I could not find the thing what you mentioned.
Do you have any picture or topic ?
-
Select Network there and put the OpenVPN tunnel in the network fields
-
Select Network there and put the OpenVPN tunnel in the network fields
I still couldn't find what you say from VPN Settings.
Do you have any pictures or details?
Please.. it's really urgently for me last one week my all works are stopped because of this issue..
-
If your OpenVPN Tunnel network is 192.168.100.0/24, do something like this substituting the proper remote network, of course.
That will need the reciprocal settings on the other side.
![Screen Shot 2017-08-03 at 11.02.09 AM.png](/public/imported_attachments/1/Screen Shot 2017-08-03 at 11.02.09 AM.png)
![Screen Shot 2017-08-03 at 11.02.09 AM.png_thumb](/public/imported_attachments/1/Screen Shot 2017-08-03 at 11.02.09 AM.png_thumb) -
If your OpenVPN Tunnel network is 192.168.100.0/24, do something like this substituting the proper remote network, of course.
That will need the reciprocal settings on the other side.
You`re totaly right
I just added my open pn tunnel network to ipsec phase 2
It works !