GMIRROR - SYNCHRONIZING 100% stuck
-
Hello,
We have a pfsense with 2 disks configured in raid 1 with GEOM Mirrors.
One disk was bad, we had replaced with a new disk. The sync is stuck at 100 % :
gmirror status Name Status Components mirror/pfSenseMirror DEGRADED ada0 (ACTIVE) ada1 (SYNCHRONIZING, 100%)
I see that the first disk with smart, we have errors when the firewall has rebooted to replace the second disk failed.
SMART Error Log Version: 1 ATA Error Count: 5 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 5 occurred at disk power-on lifetime: 20844 hours (868 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 00 8c a1 40 Error: UNC at LBA = 0x00a18c00 = 10587136 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 00 8c a1 12 00 00:51:12.327 READ DMA EXT 25 00 00 00 8c a1 12 00 00:51:10.264 READ DMA EXT 25 00 00 00 8c a1 12 00 00:51:08.200 READ DMA EXT 25 00 00 00 8c a1 12 00 00:51:06.001 READ DMA EXT 25 00 00 00 8c a1 12 00 00:51:03.954 READ DMA EXT ...
So, we will reinstall pfsense soon but we aren't on site.
Is there a way to unlock this situation please ?
Thanks.
-
Looks to me like that second disk (ada1) has failed. There probably won't be any way around that without physically replacing the drive.