Statement CAM status: Uncorrectable parity/CRC error
-
I installed pfsense.
Everything works fine, but the following message appears from time to time.
Sep 3 12:28:21 kernel (ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 4f 04 81 40 08 00 00 01 00 00 Sep 3 12:28:21 kernel (ada0:ahcich0:0:0:0): CAM status: Uncorrectable parity/CRC error Sep 3 12:28:21 kernel (ada0:ahcich0:0:0:0): Retrying command
From the content of the message I conclude that there is a problem with the disk.
However, I am not able to determine what.
Does anyone know how to fix the above error, the message is not popping up. -
Unfortunately that could be anything. It could be the drive itself, the cable, the port on the motherboard/controller, even drive firmware and not a hardware fault.
Check Diagnostics > SMART Status, see if anything looks out of sorts there in the 'All' output for the drive. Maybe even initiate a test and see if it finds anything.
If it's a SATA disk, swap the cable out and try a different SATA port on the motherboard.
If that doesn't help, it probably is the disk.