HOW TO CONNECT DIFFERENT NETWORKS
-
Hi i have a two netrwork in diferent headquarters for example headquarters01 (172.15.20.0/24) and headquarters02 (172.15.10.0/24) these are interconnected by cisco L2L modems but the sede01 which is the main one also has a cisco L2L and here is the router that is the one that allows the Internet. I have install pfsense on my network main headquarters01 but before my internet provider suggested that I use the same router configuration in pfsense so I created a gateway 171.15.10.28 that is the same as another's.
My diagram of network is this (diagrama.png) This link could serve me https://doc.pfsense.org/index.php/IPsec_between_pfSense_and_Cisco_IOS and the configuration of my router cisco is this:
interface FastEthernet0/1
description Interface LAN
bandwidth 35000
ip address 171.15.10.221 255.255.255.0 secondary
ip address 191.x.y.23 255.255.255.240ip route 171.15.20.0 255.255.255.0 171.15.10.28 name CNX_TO_Nicolli
ip route 171.15.30.0 255.255.255.0 171.15.10.28 name CNX_TO_ALCAZAR
ip route 171.15.40.0 255.255.255.0 171.15.10.28 name CNX_TO_AMANCAES
ip route 171.15.50.0 255.255.255.0 171.15.10.28 name CNX_TO_BIBLIOTECA
ip route 171.15.60.0 255.255.255.0 171.15.10.28 name CNX_TO_EL_SOLaccess-list 10 permit 171.15.10.0 0.0.0.255
access-list 10 permit 171.15.20.0 0.0.0.255
access-list 10 permit 171.15.30.0 0.0.0.255
access-list 10 permit 171.15.40.0 0.0.0.255
access-list 10 permit 171.15.60.0 0.0.0.255
access-list 10 permit 171.15.50.0 0.0.0.255Please help me.
-
where is pfsense in this drawing?
-
Hi, thanks for you, pfsense would be in replacement of the router, it would be in bridge mode so the pfsense assumes the ip publica.
-
replacement of which router? i count around 8 routers in your drawing….
-
"it would be in bridge mode so the pfsense assumes the ip publica."
Then it wouldn't be routing now would it.. What what is your question?