New 502 Bad Gateway
-
Read this: https://forum.pfsense.org/index.php?topic=136847.msg748761#msg748761
-
Thank you, ill try that to see if it works..
-
That was not it, did it again, and I received 0 errors /var/run/php-fpm.socket failed. Actually the logs didn't show anything at all.. or nothing out of the normal should I say. Ill keep watching it, and if it happens gain try to find out something that might help in figuring out what is causing it.
-
That was not it, did it again, and I received 0 errors /var/run/php-fpm.socket failed. Actually the logs didn't show anything at all.. or nothing out of the normal should I say.
So, you actually mean that it worked?
-
No, it cleared the errors that you said was the cause, however I am still getting the 502 bad gateway error, not as often, but still getting them.
-
Well, then you'll need this as well, probably…
-
Thank you sir. I will try that as well. I thank you for your help.
-
I have a question Doktornotor, will rc.php_ini_setup get overwritten on updates?
-
Also its still happening.. even with the changes you suggested :(
-
Update* Reverted back to 2.4.0 and its no longer happening, only happens with the 2.4.1 version!
-
Worked great for the 2 days, updated to the OCT 3 update, and now all my sites are getting 502 bad gateway. Trying the new update today.. But something is seriously messed up.
-
All I get now is upstream timed out, however nothing before this starts, it acts as if everything is ok, then bam 502 error. No Listen queue overflow nothing. something is killing Nginx.
Oct 4 14:18:53 fort-smith.rentlynnwood.com nginx: 2017/10/04 14:18:53 [error] 34017#100128: *892 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 70.178.196.154, server: , request: "GET /widgets/widgets/pfblockerng.widget.php?getNewCounts=1507144432540 HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "fort-smith.rentlynnwood.com", referrer: "https://fort-smith.rentlynnwood.com/index.php" Oct 4 14:18:43 fort-smith.rentlynnwood.com nginx: 2017/10/04 14:18:43 [error] 34017#100128: *890 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 70.178.196.154, server: , request: "GET /widgets/widgets/pfblockerng.widget.php?getNewCounts=1507144422541 HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "fort-smith.rentlynnwood.com", referrer: "https://fort-smith.rentlynnwood.com/index.php" Oct 4 14:18:42 fort-smith.rentlynnwood.com nginx: 2017/10/04 14:18:42 [error] 49658#100106: *381 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 192.168.1.139, server: , request: "GET /decide?version=1&lib=android&token=0350ff19c3e127ef2c92f5cc82284391&distinct_id=d15cf0351e8da34a2092d588fd3e33ed7fecd29e HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "decide.mixpanel.com" Oct 4 14:18:33 fort-smith.rentlynnwood.com nginx: 2017/10/04 14:18:33 [error] 34017#100128: *888 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 70.178.196.154, server: , request: "GET /widgets/widgets/pfblockerng.widget.php?getNewCounts=1507144412542 HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "fort-smith.rentlynnwood.com", referrer: "https://fort-smith.rentlynnwood.com/index.php" Oct 4 14:18:32 fort-smith.rentlynnwood.com nginx: 2017/10/04 14:18:32 [error] 49658#100106: *379 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 192.168.1.152, server: , request: "GET /MFEwTzBNMEswSTAJBgUrDgMCGgUABBTBL0V27RVZ7LBduom%2FnYB45SPUEwQU5Z1ZMIJHWMys%2BghUNoZ7OrUETfACEAi4elAbvpzaLRZNPjlRv1U%3D HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "ocsp.digicert.com" Oct 4 14:18:23 fort-smith.rentlynnwood.com nginx: 2017/10/04 14:18:23 [error] 34017#100128: *765 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 70.178.196.154, server: , request: "GET /widgets/widgets/pfblockerng.widget.php?getNewCounts=1507144402542 HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "fort-smith.rentlynnwood.com", referrer: "https://fort-smith.rentlynnwood.com/index.php" Oct 4 14:18:23 fort-smith.rentlynnwood.com nginx: 2017/10/04 14:18:23 [error] 34017#100128: *879 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 70.178.196.154, server: , request: "GET /widgets/widgets/pfblockerng.widget.php?getNewCounts=1507144382542 HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "fort-smith.rentlynnwood.com", referrer: "https://fort-smith.rentlynnwood.com/index.php" Oct 4 14:18:23 fort-smith.rentlynnwood.com nginx: 2017/10/04 14:18:23 [error] 34017#100128: *651 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 70.178.196.154, server: , request: "GET /widgets/widgets/pfblockerng.widget.php?getNewCounts=1507144392541 HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "fort-smith.rentlynnwood.com", referrer: "https://fort-smith.rentlynnwood.com/index.php" Oct 4 14:18:14 fort-smith.rentlynnwood.com nginx: 2017/10/04 14:18:14 [error] 49658#100106: *375 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 192.168.1.124, server: , request: "POST /news/report HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "n.m.ksmobile.net" Oct 4 14:18:09 fort-smith.rentlynnwood.com nginx: 2017/10/04 14:18:09 [error] 49658#100106: *373 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 192.168.1.124, server: , request: "POST /news/report HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "n.m.ksmobile.net" Oct 4 14:18:01 fort-smith.rentlynnwood.com nginx: 2017/10/04 14:18:01 [error] 49658#100106: *371 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 192.168.1.124, server: , request: "POST /news/report HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "n.m.ksmobile.net" Oct 4 14:17:59 fort-smith.rentlynnwood.com nginx: 2017/10/04 14:17:59 [error] 49658#100106: *369 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 192.168.1.124, server: , request: "POST /news/report HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "n.m.ksmobile.net" Oct 4 14:17:59 fort-smith.rentlynnwood.com nginx: 2017/10/04 14:17:59 [error] 49658#100106: *367 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 192.168.1.124, server: , request: "POST /news/report HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "n.m.ksmobile.net" Oct 4 14:17:56 fort-smith.rentlynnwood.com nginx: 2017/10/04 14:17:56 [error] 49658#100106: *363 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 192.168.1.124, server: , request: "POST /news/report HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "n.m.ksmobile.net" Oct 4 14:17:54 fort-smith.rentlynnwood.com nginx: 2017/10/04 14:17:54 [error] 49658#100106: *360 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 192.168.1.124, server: , request: "POST /news/report HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "n.m.ksmobile.net" Oct 4 14:17:54 fort-smith.rentlynnwood.com nginx: 2017/10/04 14:17:54 [error] 49411#100110: *359 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 192.168.1.124, server: , request: "POST /news/report HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "n.m.ksmobile.net" Oct 4 14:15:53 fort-smith.rentlynnwood.com nginx: 2017/10/04 14:15:53 [error] 34017#100128: *892 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 70.178.196.154, server: , request: "GET /widgets/widgets/pfblockerng.widget.php?getNewCounts=1507144372542 HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "fort-smith.rentlynnwood.com", referrer: "https://fort-smith.rentlynnwood.com/index.php" Oct 4 14:15:43 fort-smith.rentlynnwood.com nginx: 2017/10/04 14:15:43 [error] 34017#100128: *890 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 70.178.196.154, server: , request: "GET /widgets/widgets/pfblockerng.widget.php?getNewCounts=1507144362541 HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "fort-smith.rentlynnwood.com", referrer: "https://fort-smith.rentlynnwood.com/index.php" Oct 4 14:15:33 fort-smith.rentlynnwood.com nginx: 2017/10/04 14:15:33 [error] 34017#100128: *888 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 70.178.196.154, server: , request: "GET /widgets/widgets/pfblockerng.widget.php?getNewCounts=1507144352542 HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "fort-smith.rentlynnwood.com", referrer: "https://fort-smith.rentlynnwood.com/index.php" Oct 4 14:15:32 fort-smith.rentlynnwood.com nginx: 2017/10/04 14:15:32 [error] 49658#100106: *335 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 192.168.1.152, server: , request: "GET /GIAG2.crl HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "pki.google.com" Oct 4 14:15:23 fort-smith.rentlynnwood.com nginx: 2017/10/04 14:15:23 [error] 34017#100128: *765 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 70.178.196.154, server: , request: "GET /widgets/widgets/snort_alerts.widget.php?getNewAlerts=1507144342542 HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "fort-smith.rentlynnwood.com", referrer: "https://fort-smith.rentlynnwood.com/index.php" Oct 4 14:15:23 fort-smith.rentlynnwood.com nginx: 2017/10/04 14:15:23 [error] 34017#100128: *879 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 70.178.196.154, server: , request: "POST /widgets/widgets/gateways.widget.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "fort-smith.rentlynnwood.com", referrer: "https://fort-smith.rentlynnwood.com/index.php" Oct 4 14:15:23 fort-smith.rentlynnwood.com nginx: 2017/10/04 14:15:23 [error] 34017#100128: *651 upstream timed out (60: Operation timed out) while reading response header from upstream, client: 70.178.196.154, server: , request: "GET /widgets/widgets/pfblockerng.widget.php?getNewCounts=1507144342542 HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket", host: "fort-smith.rentlynnwood.com", referrer: "https://fort-smith.rentlynnwood.com/index.php"
-
As noted, you are simply overloading nginx with your CP. All the hints are already above, go on with some better tuning. Noone will do it for you.
-
I have upped the tuning, all the things you suggested. Also they does not explain the fact that it worked fine for 2 full days, after I reverted to 2.4 then on OCT 3 after the update less than an hour it started happening. Its not overloading the CP, it looks like it is, but its not. It just dies.. you see the CP because when it dies, it tosses the 502 and the CP stops. I have the settings all set way up, to stop this, and it has had no effect at all! Once the Nginx crashes nothing can work so it starts tossing out errors. Also I have turned off the CP just to see if that was the issue, it still happened.
I had PFblocker installed, just removed it to see if that is causing the issue. 30 min, no crash as of yet.
-
Eh well, it not just overloads nginx, it overloads the entire box apparently as mentioned earlier.
Sep 25 11:25:10 kernel sonewconn: pcb 0xfffff8004c40f690: Listen queue overflow: 193 already in queue awaiting acceptance (9 occurrences) [/code)[/code]
-
Still good to go since I removed PFblocker, I am thinking it may have something to do with PFblocker / Snort/ or Squidguard working together on 2.4 What was updated on 2.4.0 on the 3rd? I looked for patch notes, but could not find it. Any file that shows what was updated on past updates?
When it does lock up, the SSH becomes unresponsive as well, it only shows the basic login, I have to CTRL-Z to close the process.
*** Welcome to pfSense 2.4.0-RC (amd64) on fort-smith ***
^ZYou have stopped jobs.
[1] + Suspended /etc/rc.initialreboot
That is the only way to get it to free up. If you try to restart PHP it will just lock up as well.
I also updated the listen Queue overflow, and the error for overflow does not happen now till WAY later, if its been locked up for 15 min or more. That is a symptom. But some file that changed on the 3rd is causing issues between pfblocker, snort, or squidguard working with each other.
Still working good since I removed Pfblocker, no errors what so ever in the logs, running like a champ.
-
If you read the above message, your box is completely overloaded with queued ingress connections. So yeah, in that state NOTHING works properly. Even linked you to the kernel tunable.
Also: http://nginx.org/en/docs/freebsd_tuning.html
-
I really appreciate the help doktornotor, and I understand where your coming from and why your giving me the solutions you are suggesting. I guess I have not explained it well enough though. I understand that its being queued with ingress connections, but the problem I have is why does it only happen when I updated on the 3rd to the newest 2.4.0 version and not before, system load has not changed, actually if anything system load is currently low. Problem only showed up on 2.4.1 and on 2.4.0 after Tuesdays update. Before that I never had an issue with Overloaded ingress connections even with pfblocker installed. I have had the system with a heaver load than it currently has and never received these errors. I have tried the settings you suggested mine are currently
kern.ipc.somaxconn=4096
and
backlog= 4096
and I still have the issue.
However when I removed pfblocker the issue stopped, but its never been an issue before, and like I said its actually low load at the current time. It only raised its head after the 2.4.0 update on the 3rd or on the 2.4.1 updates. Before then even on the 2.4.0 I had no issues even during high loads. That is why I posted in the 2.4 Development Snapshots, because it only showed up after an update, something changed to cause the problem. All I did was update to newest version, no load change or anything else. Update then issue showed up. Again I do appreciate your help, but I guess I will have to wait till more are having the issue. I know they will have issues, I have 2 boxes set up, one only has one to two users at any given time so super low load and even it started after the update.
Thank you for your assistance. Sorry for taking your time.
BreeOge
-
I'm seeing the same thing - 502 errors. I'm running three sites all of them worked perfect until 2.4.0-RC changed from bsd 11.0 to bsd 11.1 (a few days ago)
Strange thing it's only one site that have problems. The problem site is the site with most users/traffic.This morning I removed pfBlocker on the problem site and so far everything good. It's to much of a coincidence that the problem started when the move was made from bsd 11 to 11.1 a couple of days ago.
I had to remove squid on all three sites (XMLRPC Sync stopped working giving a constant flow of errors) and now Pfblocker is removed on one site after the introduktion of bsd 11.1.
-
Yea, it happens more on the one that has higher traffic, but if you leave it even on the low traffic ones they will eventually get it as well, just takes longer. Its like its not releasing something, and keeps building till it locks up..
I removed all my PFblockers too.. Interesting side note as well
I have 3 systems, 2 of them have Pfblocker, squid, and squidguard installed. Those are the ones getting the 502. I have another one set up, with only Squid, and Pfblocker, and Squidguard disabled. It has yet to get a 502 Bad gateway. It seems to be something with the 11.1 and either Pfblocker or Squidgard or all working together, but if you have Squid and Squidguard and no pfblocker it does not happen, same goes with Squid and Pfblocker with no Squidguard. Its only when all 3 are present.
Seanr22a do you have those 3 installed on all your systems or a mix?
-
Seanr22a do you have those 3 installed on all your systems or a mix?
I have two SG-2440 and one SG-8860. They all have Snort, Squid and Pfblocker. The configuration is identical at these sites so I use XMLRPC Sync in all three packages.
At the two sites still running Pfblocker I have moved the IP blocklists to Snort and only using DNSbl in the Pfblocker package. I will wait a couple of days if its still fine I will install Pfblocker using only DNSbl at the main site as well and give it a try. My problem with squid is the XMLRPC Sync but all this started to happen with bsd 11.1To me it looks like it's running out of resources of some kind. I have a lot memory and diskspace available when it happens so its something else.
-
I have a lot memory and diskspace available when it happens so its something else.
Same here..
The release notes for 11.1 are here https://www.freebsd.org/releases/11.1R/relnotes.html#kernel
Lots of changed for the kernel. I suspect one of these are the cause, due to it crashed the kernel but I could be wrong on that. Also I have no idea what would cause it. just something to look at.
I know it looks like the system is being overloaded like doktornotor said, but hard to believe a system that never overloaded before the update now overloads constantly with the same load or less. Does not make sense.
-
Hmm I'm not running into any issues on my test 2.4.1 box, but to be fair, I'm not running Snort of pfBNG. Hope this doesn't turn out to be a nasty bug in the kernel that could delay 2.4.x getting out the door. Seems like every time 2.4 is about to drop something else comes up. Been 542 days since 2.3-RELEASE :)
-
Hmm I'm not running into any issues on my test 2.4.1 box, but to be fair, I'm not running Snort of pfBNG. Hope this doesn't turn out to be a nasty bug in the kernel that could delay 2.4.x getting out the door. Seems like every time 2.4 is about to drop something else comes up. Been 542 days since 2.3-RELEASE :)
Yea it is for sure related to the 11.1 Kernal, PfblockerNG, or Squidguard. Remove one or the other (pfblockerNG, or SquidGuard) and issue does not exist.
Did a test, I had one system working for over 24 hours, since I removed PfblockeNG and no 502, put it back in and in less than 2 hours, crash.
I have one system with PfblockerNG installed, and squidguard disabled, no issues at all. Enabled Squidguard, and crash in less than 2 hours.
So the issue lies between PfblockerNG, Squidguard and the Kernal. I would suspect, but i am no expert.
-
Started having the same issue since the 2.4RC switch from 11.0 to 11.1. I am running pfBlocker.
-
Started having the same issue since the 2.4RC switch from 11.0 to 11.1. I am running pfBlocker.
Do you have Squidguard also?
-
-
My system that has a SUPER low load finally 502 Bad gateway.. So that rules out anything to do with SquidGuard, it is an issue with Pfblocker, and 11.1 kernal.
-
My system that has a SUPER low load finally 502 Bad gateway.. So that rules out anything to do with SquidGuard, it is an issue with Pfblocker, and 11.1 kernal.
I got my 502 problems sorted out but not in the way I want …
FW1: SG-2440 4Gb memory, 20Gb disk running 2.4.0.r.20171006.2203 - Snort, PFblocker, Squid
FW2: SG-2440 4Gb memory, 20Gb disk running 2.4.0.r.20171006.2203 - Snort, PFblocker, Squid
FW3: SG-8660 8Gb memory, 40Gb disk running 2.3.4-RELEASE-p1 - Snort, PFblocker, SquidThe above setup works perfect, no 502 errors. I want to run the SG-8660 on 2.4 as well but it simply don't work. I get 502 errors and after a while it stops to respond completely. I don't get any 502 errors on the SG-2440 running 2.4 and they have been up since October 6. Note that they run the same packages.
The SG-8660 have a 8-core CPU, more memory and disk but can't run 2.4 with these packages. This firewall have lot more users/traffic during the weeks but I did a test this weekend when the office is closed so no users/traffic - it just sits idle. It takes 3-4 hours and I get 502 error and 1-2 hours later it stops respond completely.
Now i reinstalled it with 2.3.4P1 and everything have been fine for two days :)
Only bad thing is that I use XMLRPC Sync for all packages between these firewalls (all run identical setup), one of the SG-2440 is the master and the other ones slaves. That was working with all FW on 2.4 but now there is a mix of 2.3.4 and 2.4 and XMLRPC Sync don't seem to be able to handle that.
Communications error occurred
Exception calling XMLRPC method merge_installedpackages_section #1 : Unknown method @ 2017-10-10 08:54:31
Exception calling XMLRPC method merge_installedpackages_section #1 : Unknown method @ 2017-10-10 08:54:32
Exception calling XMLRPC method exec_php #3 : Incorrect parameters passed to method: Signature permits 2 parameters but the request had 1 @ 2017-10-10 08:54:33
Exception calling XMLRPC method exec_php #3 : Incorrect parameters passed to method: Signature permits 2 parameters but the request had 1 @ 2017-10-10 08:54:34[EDIT]
Forgot to write that I get the same sync error no matter if it's snort, PFblocker or squid - they all give the same error message so I don't think it have to do with the packages. -
Its something with Pfblocker and the new 2.4.0 & 2.4.1. 2.3 works fine. I can uninstall pfblockerng and my systems stay up for days, weeks, even longer.. if I put pfblockerng in.. it locks in less than 12 hours.. or less. The 502 is just a symptom of the issue, but its the symptom you notice first. Nginix is not directly related to the issue, its the system locking up internally, and not executing commands. Causes everything to go nuts.
-
Strange thing is that I run PFblocker on the SG-2440 boxes without issues. They have been up since I installed the 1006.2203 release …. 4 days now. Same install on the SG-8660 locks up in a couple of hours. ???
-
Just happened again. Here are my symptoms:
- Web GUI inaccessible
- ssh and local console do no show the menu and do not accept any input
- external openvpn clients cannot connect (I have an inboud rule that uses an country alias created in pfblocker)
Everything else keeps working, internet access, outbout vpn tunnels, port forward from outside to internal servers, DNS resolver, FW rules, vlan routing, etc.
I just updated to the latest build and I hope this gets fixed in the final release.
-
I was seeing the same thing, I upgraded to the October 9th snapshot, and did a "pkg upgrade -f" at the shell prompt and all is well again.Statement retracted.
Took a day but yes, eventually got the bad gateway again.
-
Strange thing is that I run PFblocker on the SG-2440 boxes without issues. They have been up since I installed the 1006.2203 release …. 4 days now. Same install on the SG-8660 locks up in a couple of hours. ???
On the SG-2440 boxes did you do a fresh install or update, and vise versa for the SG-6880?
I was seeing the same thing, I upgraded to the October 9th snapshot, and did a "pkg upgrade -f" at the shell prompt and all is well again.
I am on the 20171009.1758 and still having issues. Depending on your load will depend on how fast it takes, I have one that can run for 4 days before it locks, but I have another than locks in less than 12 hours. I have also done the "pkg upgrade -f" and "pkg update -f" on all systems, to rule out maybe a bad file. Still persists.
I hate to say it, but I am glad others are having issues. I knew I wasn't crazy like what was suggested. ::)
-
Hi besides using pfBlocker, do (some of?) you guys also use xmlrpc feature?
Can you check that there are 4 active php-fpm processes 'running' ?I found that if i sync pfSense settings several times in a period of a few seconds then sometimes the sync process bails out as soon as it needs to 'print' some output, adding ignore_user_abort and setting no time limit should allow it to always finish and remove the placed lock file..
Maybe some of you can try if this patch can solve/reduce some of these issues?: https://github.com/pfsense/pfsense/pull/3848
To apply it, either add the 2 lines manually to the changed file /usr/local/www/xmlrpc.php or apply it through patches package.. -
Hi besides using pfBlocker, do (some of?) you guys also use xmlrpc feature?
Can you check that there are 4 active php-fpm processes 'running' ?I found that if i sync pfSense settings several times in a period of a few seconds then sometimes the sync process bails out as soon as it needs to 'print' some output, adding ignore_user_abort and setting no time limit should allow it to always finish and remove the placed lock file..
Maybe some of you can try if this patch can solve/reduce some of these issues?: https://github.com/pfsense/pfsense/pull/3848
To apply it, either add the 2 lines manually to the changed file /usr/local/www/xmlrpc.php or apply it through patches package..I dont use the xmlrpc feature on any of my boxes.. I don't know if the other guys do, they may..
-
Having the same issue here. I've even tried using "pkg upgrade -f" in the shell but nothing. I can sign in as a user an execute commands at user level no problem but as admin I'll get stuck with the command screen unable to load as everyone else has a problem with. Shutdown won't even commence and I have to do a forced shutdown in order to restart. I'm on the latest build on my home box but I have another box with this issue running on the weekend release. Removed squid/squidguard, I'm also not using xmlrpc feature but am using pfBlockerNG.
-
On the SG-2440 boxes did you do a fresh install or update, and vise versa for the SG-6880?
All three came from 2.3.4-RELEASE-p1. I de-installed all packages on all three, upgraded to 2.4 and installed the packages again. I only have 502 problems with the SG-8860. Now when the 8660 is downgraded to 2.3.4-RELEASE-p1 I have problems with the XMLRPC Sync because of the mixed 2.4 and 2.3.4 setup.
-
https://redmine.pfsense.org/issues/7923
-