<![CDATA[NAT Lan IP to WAN IP]]>I have a web server behind pfSense 2.3.4, i can access the web server from Lan and Wan without any problem.

I have 3 Static Public IP from my ISP (1 block x.x.x.x/32):

175.175.175.1 ==> Used by pfSense as PPPoE service.
175.175.175.2 ==> Used by Web Server 1.
175.175.175.3 ==> Used by Web Server 2.

when running this command from SSH Web Server 1 (75.175.175.2)```
dig +short myip.opendns.com @resolver1.opendns.com.


that mean pfSense NAT Lan packets Source from [175.175.175.2] to [175.175.175.1], i know its normal, but how to disable this NAT ?

i already tested Manual Outbound NAT, and 1:1… the result its always the same.

Please how to disable NAT ? or how to assign the Public IP directly to the web server behind pfSense ?

Thank in advance,
]]>https://forum.netgate.com/topic/120915/nat-lan-ip-to-wan-ipRSS for NodeWed, 14 Oct 2026 04:51:39 GMTTue, 03 Oct 2017 20:56:26 GMT60<![CDATA[Reply to NAT Lan IP to WAN IP on Wed, 04 Oct 2017 12:49:17 GMT]]>dig only resolves myip.opendns.com by using resolver1.opendns.com. And the associated IP is obviously 175.175.175.1.
If you want your web server 2 to use another external IP you have to set it up in the DNS and assign this IP to your WAN interface and configure 1:1 NAT. However, the 1:1 only effects outbound connections.

]]>https://forum.netgate.com/post/725194https://forum.netgate.com/post/725194Wed, 04 Oct 2017 12:49:17 GMT