NAT Lan IP to WAN IP
I have a web server behind pfSense 2.3.4, i can access the web server from Lan and Wan without any problem.
I have 3 Static Public IP from my ISP (1 block x.x.x.x/32):
22.214.171.124 ==> Used by pfSense as PPPoE service.
126.96.36.199 ==> Used by Web Server 1.
188.8.131.52 ==> Used by Web Server 2.
when running this command from SSH Web Server 1 (184.108.40.206)```
dig +short myip.opendns.com @resolver1.opendns.com.
that mean pfSense NAT Lan packets Source from [220.127.116.11] to [18.104.22.168], i know its normal, but how to disable this NAT ? i already tested Manual Outbound NAT, and 1:1… the result its always the same. Please how to disable NAT ? or how to assign the Public IP directly to the web server behind pfSense ? Thank in advance,
dig only resolves myip.opendns.com by using resolver1.opendns.com. And the associated IP is obviously 22.214.171.124.
If you want your web server 2 to use another external IP you have to set it up in the DNS and assign this IP to your WAN interface and configure 1:1 NAT. However, the 1:1 only effects outbound connections.