Installing - Don't know where to start
-
I followed all the instructions, setup all of the interfaces, logged in to the webGUI and went through the initial setup, but I have no idea how to proceed.
My setup:
Old PC for testing
AMD Athlon 1600mhz, 512mb, HDD1 30g, HDD2 20gCable 12m/4m
Static IP's: XXX.XXX.XXX.98, XXX.XXX.XXX.99
Subnet: 255.255.255.240 /28
Gateway: Same first 3 octets .97
DNS: XXX.XXX.28.12, XXX.XXX.29.11T1
Static IP's XXX.XXX.XXX.58 - XXX.XXX.XXX.62
Subnet: 255.255.255.248
Gateway Same first 3 octets .57
DNS: 66.XXX.XXX.38, 207.XXX.XXX.50LAN
Static IP: 192.168.123.254
Subnet: 255.255.255.0 /24
DHCP Server Enabled
DHCP Lease Range: 192.168.123.21 - 192.168.123.169
DHCP Primary DNS: 192.198.123.1 (Windows DC, required or can't login to domain)Where do I go from here? I want to use both the cable and T1 connections to load balance/failover the outgoing traffic. Incoming traffic (HTTP,HTTPS,FTP,etc.) on both connections will be routed individually. Outbound traffic to one of the public IP addresses will be routed back to the LAN IP so we can access www.ourdomain.com even if the WAN is disconnected.
Thanks for any help in advance,
Traigo -
http://forum.pfsense.org/index.php/topic,7001.0.html
Best is you read the available tutorials.