ALTQ missing on interface…what to do?
-
When trying to run the Traffic Shaping Wizard I get:
"This firewall does not have any LAN-type interfaces assigned that are capable of using ALTQ traffic shaping."
The network card is (from sysctl dev.em.1)
dev.em.1.%pnpinfo: vendor=0x8086 device=0x105e subvendor=0x8086 subdevice=0x115e class=0x020000
dev.em.1.%location: slot=0 function=1 dbsf=pci0:2:0:1
dev.em.1.%driver: em
dev.em.1.%desc: Intel(R) PRO/1000 Network Connection 7.6.1-kIs ALTQ truly not supporting this NIC?
-
Is your lan on a bridge interface?
-
No. I do have 3 VLANs setup on it.