HAproxy makes trouble after upgrading to 2.4.1
-
Hi guys
First, thanks for pfSense, it's a wonderful software.
In my house, my trusty SG-2220 misbehaved going from 2.3 to 2.4, mostly because I'm dump at FreeBSD :)
Then I decided to virtualize, installed pfSense on a NUC running ESXi,- perfect.
It seems like something is "rotten" ;) running 2.4.1 and HAproxy.
I have 4 web servers on the LAN (only HTTP), it ran perfectly on the SG-2220 with HAproxy directing the traffic to the different servers.
No load sharing, it's different websites with different ip's.No matter what I do, pfSense makes some strange round-robin-alike loadsharing on the webservers?
I've been struggling for some days now, trying a lot of setups … HAproxy seems to loadshare between the web servers now, no matter what I do.
Anyone else having this experience,- and by the way, what happened to "Shared Frontend" button?
-
What does your config look like? It can be seen from bottom of settings tab.
-
Hi BiPa
Right now,- everything is deleted. :)
I tried at least 10 different setups, small variations and much, I had it running for a long time before the new install and upgrade to 2.4.
No matter what I do, pfSense makes a round-robin on the webservers.
I will set it up again and post the config, I just got the idea that the problem was in the software.
Thanks for your answer :)